Tokuda votes NO, Socialism is the way

Case votes to YEA.

Result below

https://clerk.house.gov/evs/2025/roll305.xml

Any questions?

Didn’t think so.

Ok just fyi called HPD today.  You will need:

1. New affidavit showing qualification for the gun, of course

2. All same paperwork as if applying the first time

3. Registration for the gun

4. Another passport size photo

No need bring cash for their beer fund for this one.

Hope that helps someone besides me.

Are there any tactical shotgun trainings or shoots in the islands?

Is it only trap/skeet at Koko Head for Oahu?

Virtually all 2A advocates here view what we’re doing as concretely supporting our freedom as Americans under our Bill of Rights - the inalienable right to defense of the freedom of ALL Americans.

We are not offensively armed against anyone.

Meet the total evil inverse of this - the offensively armed Socialist Rifle Association - which appears to be solely focused on using firearm violence against us.

We may be forced to contemplate a new armed risk to liberty in this country from Communist terror cells like these.

Civil terrorism expert Anderson explained:

The Socialist Rifle Association has 52 local chapters across 33 U.S. states, and claims to have 10,000 members. Considering they are the armed wing of the anti-American revolution, people should be more concerned about what is going on with the growing militant left.

“Hospitalize your local fascist”

The Daily Wire was able to identify several violent crimes linked to Socialist Rifle Association members, with indications in each case that the violence was politically motivated.
On July 4, a group of militants allegedly swarmed law enforcement at an ICE facility in Alvarado, Texas and “opened fire at the unarmed DHS correctional officers.” One of them, Benjamin Hanil Song, is charged with shooting a police officer in the neck. Song was a member of the Socialist Rifle Association’s Dallas-Fort Worth chapter, a fellow group member told KERA. Of the 10 co-defendants charged with attempted murder of a federal officer, at least two claimed to be transgender: Cameron Arnold, who went by Autumn Hill, and Bradford Morris, who went by Meagan Morris. Authorities recovered nine firearms in the home where Arnold lived with about six other transgenders.”

https://www.dailywire.com/news/socialist-rifle-association-linked-to-numerous-violent-attacks

Fuller information at

https://www.zerohedge.com/political/planning-war-against-fascists-socialist-rifle-association-boasts-10000-members#google_vignette

The demons are on the march.  For those who still don't get it, we are at war.

https://www.zerohedge.com/political/mass-shooting-minneapolis-catholic-school-2-dead-many-injured-suspect-contained

One mag says "Where is your God?"  This demon is burning in hell now, cut off from God for eternity.

I likely will have more to share with you folks regarding Communist incitement at UH ...

If you don't own a firearm here in these islands, 2,500 miles from anywhere, with teeny tiny police forces, and huge populations (now including REAL criminal types), ...

YOU ARE AN IDIOT

https://www.khon2.com/local-news/thieves-target-business-homes-during-tsunami-evacuation/

..... aaanndd here are the Dem brownshirts, being mobilized for another season of violence against the American people.

Story below - I'll just add, that while they're attacking the police and federal agents now, they will obviously do so likewise to any target their masters choose, including your church, etc.  They just haven't seen any political payoff from doing so yet.

Be prepared to be a Rooftop Korean, maybe sooner that you were thinking.



https://www.zerohedge.com/political/marxist-linked-unrest-worsens-los-angeles-amid-coordinated-color-revolution

Today’s featured bird is the impressive Hakeem Jeffries, who likened ICE agents to NAZI’s for their role in crushing his party’s orchestrated invasion of … his own country.

“Every single ICE agent who's engaged in this aggressive overreach and are trying to hide their identities from the American people will be unsuccessful in doing that,” House Minority Leader Hakeem Jeffries (D-N.Y.) said at a press conference Tuesday.

“This is America. This is not the Soviet Union. We're not behind the Iron Curtain. This is not the 1930s. And every single one of them, no matter what it takes, no matter how long it takes, will, of course, be identified.”

The Hakeem Jeffries can easily be identified by its puffed feathers and exaggerated bluster in front of cameras, however it must be noted that it is a sub species of butt pirates, and therefore completely harmless when in the minority.



https://www.zerohedge.com/political/hakeem-jeffries-threatens-doxx-ice-agents-compares-them-nazis

If you have an M4 and want 7-round tube + 922r compliant, and don't want to replace any of the externals (like me), you're going to have to replace internals in the fire control group (at least 2 if you are also going to replace the follower).

That leads you to trigger, disconnector or hammer replacement.  I opted to replace all three, keeping the original Benelli follower.

I'm putting this note here, because info on the Benelli forum is years dated, and ends with not a clear resolution to issues with respect to fitting these in the current polymer trigger guard on M4's.

Here's what I found in using the black phosphate FFT Trigger Pack (Freedom Fighter Tactical):

1. The components I received are indeed high quality.  The disconnector and hammer are definitely superior in terms of form/fit to the originals.  The OEM trigger is very nice, as is the FFT.

2. You can directly replace the disconnector and hammer in the OEM polymer trigger guard, and they function perfectly - no fitting needed, i.e. they appear to be exact dimensions to the OEM.

3. Trigger dimensions on the FFT are different enough though, that when placed into the polymer guard (along with the FFT disconnector and hammer), the hammer hangs heavily enough on the disconnector that fitting is not the answer.  It seems the trigger pin hole placement is ever so slightly different between the two triggers.

4. Expecting something like this, I ordered the OEM original aluminum trigger guard from Midwest Gun Works ahead of time - it's for real, they are the genuine article.  The FFT trigger, disconnector and hammer all function properly in the OEM aluminum trigger guard.  This makes sense, as the FFT components were manufactured prior to Benelli switching to the polymer trigger guard, so it seems things changed a bit in the trigger when Benelli went to the polymer.

5. Nevertheless, the tolerances are tighter on the FFT components, and I did find it a good idea to lightly stone the sears on the disconnector / hammer interface, as they brush past each other as the bolt cycles while the trigger is forward (i.e. finger off the trigger, as when you cycle the bolt to chamber a round).  The amount of fitting though is like 1/1000th of the fitting you have to do in fitting all new parts in an S&W revolver - thank God.  In line with this last point, you can't cycle the bolt with the safety on unless the hammer is already cocked - which is they way it's supposed to be.  If you can do this on an M4 (hammer released forward, safety on, and you can easily cycle the bolt) - then you likely have a gun with a non-functioning safety.

6. On the other hand, the trigger sear on the FFT really reminds me of a revolver sear, in that it is more of a notch, not a hook, as is the OEM trigger sear.  As a result, the break is much shorter.  You hit good resistance, but just past that, it smoothly breaks.

7. I had full safety of function, no possible fire on release, and a firm lock up between hammer sear / trigger sear.

8. The trigger function is a lot more refined now: Lighter pull, smoother break, but no sacrifice in terms of safety of function, it's like a rock everywhere it's supposed to be.  Also, the aluminum trigger guard is WAY easier insert / remove from the receiver.  All else equal, pretty much anyone would like the aluminum more than the polymer, but, from the above, it seems like you will run into trigger problems just substituting this part.

Posting this because I would have liked this info beforehand too, and I'm pretty sure I'm not the only Benelli M4 fan in the forum.

'Best to you and yours!

More physical proof of the very real tyranny we experienced during COVID - and all we truly had were our arms under the 2A and our commitment to defending our liberty.  There was no one coming to our rescue, FBI, courts, and local government were all weaponized overnight.  Truly we came “that close”:

“The designation infringed on the First Amendment and opened the door to investigating Americans for vaccine mandate skepticism.

The Biden Administration labeled Americans who opposed the COVID-19 vaccination and mask mandates as “Domestic Violent Extremists,” or DVEs, according to newly declassified intelligence records obtained by Public and Catherine Herridge Reports. The designation created an “articulable purpose” for FBI or other government agents to open an “assessment” of individuals, which is often the first step toward a formal investigation, said a former FBI agent. 

The report, which the Director of National Intelligence, Tulsi Gabbard, has declassified, claims that “anti government or anti authority violent extremists,” specifically militias, “characterize COVID-19 vaccination and mask mandates as evidence of government overreach.” A sweeping range of COVID narratives, the report states, “have resonated” with DVEs “motivated by QAnon.”

https://www.zerohedge.com/political/declassified-biden-admin-labeled-covid-dissenters-domestic-violent-extremists