Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - tim808

Pages: [1] 2 3 ... 8
1
General Discussion / 28 gauge ammo
« on: March 07, 2026, 11:19:42 PM »
Which stores stock 28ga ammo?  I’m hoping Roy’s does.

I’m assuming a box of 25 is probably going to be about $20
2
General Discussion / What deer scope are you using?
« on: August 08, 2025, 05:19:45 PM »
Bojangle recommended a durable scope like a Trijicon or Swfa so I’m close to buying something.

New Trijicon Hurons (3-9x40, no illuminated reticle) are as low as $350

New SWFA’s run about $750 (3-15x42, I think no illuminated reticle)

Are you folks using illuminated reticles? 
Did you shoot a deer in low lighting?

(I pretty much know I should save up more to get the Trijicon Credo which has an illuminated reticle)
3
I just looked at the photo I took for the permit pickup and saw that HPD now gives about 26 days for permit pickup

Did time to register a pistol after getting a permit also change? 

I tried skimming thru the HPD site and didn’t see anything.
4
General Discussion / 30 round AR mags not available at LGS??
« on: April 01, 2025, 11:59:19 AM »
My coworker bought an AR from DCT and he told me that DCT and other local stores no longer sell 30 rd AR mags

I’m thinking he misunderstood something

5
One of the guys at my work place was telling me that getting a new HE card does not qualify for a PTA for a longarm. 

He said the “new” handgun affidavit (training includes suicide/mental health/domestic abuse??) is needed for PTA for a longarm.

When I read the hpd requirements it seems like the HE card is enough to get a PTA for a longarm but the HE card can’t be > 4 years old

I’m wondering if the HPD site is not up to date or did my coworker miss understand something

I’ll call/email Suzy at HPD too

https://www.honolulupd.org/police-services/firearms/
6
General Discussion / Which FFL are you using? Fee?
« on: November 28, 2024, 11:17:29 PM »
What are current FFL fees?  Who are you folks using?

I know there was thread a few years ago but it must be pretty obsolete

I used to go thru Kaneohe Gun Shop but got lazy about making the drive.  Then was using another place near the police station but they closed down.
7
General Discussion / Pistol red dot sight - price depreciation
« on: November 20, 2024, 03:43:34 PM »
11/21/24 Edited to add that you folks convinced me to at least split the difference between a used Venom and the Holosun 507c Vulcan acss with 250moa ring.  Ordered a HS407A3 X2 from Palmetto.  Came out to a little under $200 with shipping/taxes.   Thanks guys for twisting my arm!
(I think they can go for as low as $159 + shipping + taxes)

11/21/24 - also picked up a used Vortex Venom and will throw that the G20.  407 goes on the MP CORE.

Original post
I just picked up a G20 MOS and MP CORE and considering my first pistol red dot…..a Holosun 507c with the ginormous 250 moa circle recommended for newbies to pistol red dots…..just for use at the range.  Not for HD….maybe get an enclosed emitter for HD….but I’ll probably just use my flashlight to aim.

I’m also considering waiting another year since competition and newer innovations might push down prices…..or pick up a used RD when someone lets their old stuff go to get something newer/better

Generally, do RD’s depreciate about 25% each year for 2 years and then sort of stabilize at that point?

Ie. could I get a used RD for about 50% off in 2 years?

https://freedomgorilla.com/products/holosun-hs507c-x2-green-dot-acss-vulcan-reticle
8
General Discussion / Rifle rack for work table
« on: November 15, 2024, 10:13:52 PM »
Anyone know of a good product to hold long arms horizontally on a wall

A $45 wall rack from Walmart or regular pegboard is the most cost effective but I was thinking of spending a little bit more and maybe getting rubber maid fast track track panels…or even steel pegboards or aluminum slat  panels

Just for hold 4-5 rifles at time, above a work table,
When I’m tinkering on stuff….cleaning, oiling, etc.  When pau, firearms get put away

I’m thinking the rubber maid panels will be good enough…but if steel or aluminum isn’t too much more I may get that.

I was browsing the gun pegboard site earlier today.  Will swing by Lowes and Home Depot to see if they have something nice

9
General Discussion / Bev block / clamshell / reaction rod
« on: November 11, 2024, 11:17:01 AM »
11/12/24 - edited to add that I just watched the video that Aaron suggested…it goes over the 3 tools. 

In a nutshell, the finned URR from Midwest is 1….but not 100% idiot proof cause there is some slight slop.  The BB is okay.  The clam is ok.  On tuff jobs, he uses the URR and clam together

He thinks unfinned RR’s are ok for muzzle devices




My old post before seeing the video:
All 3 should be fine for barrel nuts as all 3 hold the upper  right? (clamshell holds exterior, bev and RR hold the locking lugs)

For a properly installed barrel nut (60-80lbs), it sounds like using all 3 (clam, BB, RR) are ok for installing muzzle devices. I assume because of the pressure between the receiver/barrel/nut they become “one”.  So you can just hold the receiver instead of the barrel itself when installing MDs

I read somewhere that alluded to manufacturers (rock river, noveske, windham/bushmaster) using RR’s to build their rifles

That said I still rather be safe than sorry when installing MD’s.  So I still put my barrel in a clamp

My reason for asking is I’m thinking of getting a Midwest URR reaction rod.   But when I think it thru….. I don’t think I really need it.  My clam and BB are good enough for barrel nuts

That said, a URR reaction rod does seem more versatile and/or easier to use in some situations.

What are you folks using? 

Does the fin on URR make a big difference compared to an unfinned RR?

Considering just getting a barrel vice instead….a cheap wheeler vice $90 or bison vice $75

10
I have TW25 and Tetra grease…. which are fine when I used to go to the range ever month

With the range closures and the new operating procedures, my stuff has been sitting for years and the TW25 and Tetra separated in both the tubes and on my toys.

I now have to try to knead the tubes… but it is a fail and oil comes out first.

The grease now seems more like a semi dry paste on my toys.

I’ve googled and it sounds like Brian Enos glide slide doesn’t separate in the tube or on toys

What grease are you folks using for firearms that sometimes sit for a while (say like about 5 years)

If all working greases separate over time, I’ll just use CLP.  Not looking for a storage grease like cosmoline.

Tnx!
11
General Discussion / Hunting - shots from prone position
« on: November 03, 2024, 02:11:23 PM »
For hunting deer or pig in Hawaii, what are the shooting positions I should practice the most?

I don’t have much experience and I was basically a kid with an other retarded kids doing an “activity” cause there wasn’t much to do in the summer.

But I don’t recall anyone ever shooting prone or sitting…..because of the tall vegetation.  All shots were standing or kneeling….over the hood/tailgate /bumper/etc.  (Hunting was more of an “activity”…it wasn’t serious….cause residents got to often hunt for free for deer eradication)

So is it most practical to just practice shooting kneeling and sitting with shooting sticks….and standing using the wood post as a support at Kokohead?

I’m pretty sure for Oahu all shots will be under 30 yards

For Lanai…I’m thinking 150 max…maybe 200

Probably more of pick a spot on ridge near where a truck.   Definitely not a stalker.  Dang I think I figured out the answer already….sitting…tripod, arca rail and 20” 6.5 Grendel AR…. Or 22’ 243 Savage if I can put an arca rail on it

12
General Discussion / But handguns are effective against bears
« on: October 20, 2024, 11:38:29 PM »
I guess humans are tougher than bears….
(Nah….just generally smarter/sneakier cause we know what a handgun will do and bears don’t)

13
General Discussion / Why 44 mag isn’t significantly better than 9mm
« on: October 20, 2024, 11:19:21 PM »
“ > 2200 fps velocity is when human tissue cannot stretch anymore and begins to tear”

“The extra energy of 44 mag only
makes a larger temp wound channel”

“Speed doesn’t matter” (handgun)

“Caliber doesn’t matter” (handgun)

Dang….i just bought a G20….

(I guess all those Alaskan hunting guides never saw this video)



https://m.youtube.com/watch?v=T6kUvi72s0Y&pp=QAFIAQ%3D%3D
14
General Discussion / Best handgun caliber
« on: October 20, 2024, 04:18:27 PM »
Reposting an old video for the younger guys that haven’t seen it.

(Spoiler alert - if you want a handgun that has the energy of a rifle/shotgun and can also defeat soft body armor, 454 casull)

 I think 22tcm, 5.7 and 7.62 tokarev can also go thru soft body armor  -  see Paul Harrells videos

https://m.youtube.com/watch?v=nycYxb-zNwc&pp=ygUQcmF0aW9uYWwgcHJlcHBlcg%3D%3D
15
General Discussion / ER doctor on handgun shootings
« on: October 20, 2024, 04:11:13 PM »
Old video and most of us old guys have probably seen it….reposting it for the younger guys

https://m.youtube.com/watch?v=3PAHu-5-aUM&pp=ygUjRW1lcmdlbmN5IERvY3RvciBvbiBwaXN0b2wgY2FsaWJlcnM%3D
16
General Discussion / Link to the new PTA process for handguns
« on: September 15, 2024, 09:19:48 PM »
Edited to add (9/17/24)
HPD emailed me this:

On Tuesday, September 17, 2024, HPD Firearms Unit <hpdfirearmsunit@honolulu.gov> wrote:
Aloha,

Yes you can come in and apply for a Blank handgun permit but everything else is the same as a handgun permit with the information. Meaning you still need to show handgun safety when applying, the permit is only good for one handgun, it is valid for only 30days from date of issuance. If you don’t use it to buy a handgun in the 30days you will need to return that original permit back to HPD Firearms. Also is cannot be emailed to you upon approval, it has to be picked up in person.

If you have further questions please call (808) 723-3188.
HPD Firearms

Original post:
Does anyone have a link to the new PTA process for handguns that isn’t 32 pages long?

When I try to google, I get the old PTA process where you need the handgun info when applying for a handgun PTA.  Also found a 32 page document on the 30 day permit but my eyes glaze over just looking at it

I also tried to search thru this forum but my search fu must be weak or I’m blind.   Probably both….

I heard that now you can apply for a permit with no pistol info and the permit is good for like 30 days…..so sort of like a rifle permit.

Can the new handgun permit be used to register multiple handguns…..similar to a rifle permit?  Or is it still 1 handgun per permit?  Ie.  4 handguns = 4 permits.

HPD website isn’t updated
https://www.honolulupd.org/police-services/firearms/

https://www.capitol.hawaii.gov/hrscurrent/Vol03_Ch0121-0200D/HRS0134/HRS_0134-0002.htm

A 32 page document on the new 30 day permit
https://www.honolulupd.org/wp-content/uploads/2024/01/Rules-of-the-Chief-2024-final.pdf
17
General Discussion / Schofield range - 12ga
« on: September 15, 2024, 02:17:13 PM »
I’m applying for a federal job at Pearl Harbor and a friend mentioned that I could use military facilities…like the shooting ranges (and golf courses :-))

I’m only aware of 3 shooting ranges Schofield, Puuloa and Kaneohe

Schofield is the closest to me.  Also, one of my friends used to shoot trap at Schofield when the Kokohead trap field was closed…..so he has some familiarity with Schofield.

For Schofield, could I shoot 7mm-08 &30-06 out to 300yd and Grendel out to 250yd?

Does Schofield allow paper targets at HD distances to check patterns for buckshot?

Does Schofield allow closer papers targets for 9mm ARs? (Like HRA fun shoots at kokohead)

I plan to pay the $100(?) to avoid the 12 hr community service (read Mrgaf’s post about that)

I like Kokohead and still plan to shoot there with my friends.

Thanks in advance!!
18
General Discussion / Link to the Holidays Schedule for KokoheD
« on: July 30, 2024, 01:24:54 PM »
Does anyone have a link to the Holidays schedule for Kokohead?  My google fu is weak
Tnx!
19
General Discussion / Why aren’t all the tables used at rifle range?
« on: July 19, 2024, 02:47:43 PM »
Someone mentioned this in another thread so I thought I would post it as a topic

Is it because there are no holes for target stands….or more tables requires more RSO’s

Seems like a waste to have idle tables when people are waiting

I can see chaining some tables off when it is slow
20
General Discussion / Anyone using red dots on their HD longarms??
« on: July 03, 2024, 11:00:48 PM »
Couple of my coworkers picked up nicer (to me) red dots and lpvo’s for their multi-role hurricane/shtf/HD/range toy ar’s. (One guy has only one AR, the other has 2 AR’s cause he is a “2 is 1” type)

I have my AR’s split into 3 groups
- range toy (4-12x42 scope, no buis)
- pig (Grendel, 7.62x39, lpvo’s, buis)
- HD/shtf/hurricane (iron sights only)

For the HD/shtf/hurricane AR’s, they are simple/lightweight
- pencil barrel
- iron back sight / FSB
- elzetta FSB light mount
- streamlight polytac
- cvlife quick adjust slings

For the folks that have ar’s set up towards HD (not dual purpose HD/range toy….so your HD ar only sees the range only in a blue moon to check function) are you using red dots?

Red dots are great but I’m pake.  And I feel stuff with circuits tend to be the first to go.  Which is why i bought lpvo’s for the pig ar’s.  Even when the circuit goes kaput, it still has an etched reticle and still usable for decades

So I’m thinking iron sights are adequate for 15-20 feet and red dots won’t make much of a difference for the average Oahu person who is unlikely to get into a HD shoot out…..where shoot outs nationally average like 2 shots

At 15-20 ft, I’m thinking almost dont need sights….can just shoulder and aim down the hand guard….or just put the light on the BG to aim

But I could be wrong in my thoughts about nice red dots on HD longarms that only see the range maybe twice in a decade to check function)

We love the cheap red dot on our Ruger Mark III….surprisingly accurate at silhouette.  My friends love their cheap Bushnell red dots on their Ruger 10/22’s.  Based on our experience and experience of friends, cheap red dots (Bushnell TR25, etc) are fairly durable, hold zero and great for range toys

Forgot to mention that I hate cleaning ar’s so they only go to the range if we have a friend/relative coming along.  For me, I’m fine with a 22lr bolt action at the rifle range.

Pages: [1] 2 3 ... 8