1. 2aHawaii
  2. Profile of Dolomite
  3. Show Posts
  4. Messages

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Dolomite

Pages: [1] 2 3 ... 45
1
Reloading / Seating Depth - Discuss
« on: December 13, 2020, 06:48:59 PM »
Quote from: drck1000 on December 13, 2020, 06:12:52 PM
Is that what you do?

When I get my gun back, and after I get charge weight dialed in, I was going to try the same. Jam point, lands, etc.

The seating die my buddy has will be a PITA to vary the different seating depths though. If/when I get to this step, will look into the dial seating dies.


I got the hornady tool, but if you don’t have the tool it’s another option.

It’s going to be hell trying to change seating depth with a non micrometer seater.

If you want to use the mag you are subject to that limitation and seating depth may or may not be an option. It’s also bullet dependent. Some like to be close to the lands and some don’t care.

Redding sells a micrometer seater add on if you have their regular seater die. Another option.
2
Reloading / Re: Seating Depth - Discuss
« on: December 13, 2020, 05:50:27 PM »
Quote from: drck1000 on December 13, 2020, 11:53:16 AM
Understand/realize that.  I was asking him how he does it. . . since there are some that don't use the OAL gauge or precision mic method. . .

Too early for amps?


3
Reloading / .308 Win Load Data Recipes
« on: December 08, 2020, 12:46:32 AM »
:shaka: :shaka: :shaka: :shaka: :shaka: :shaka:
4
Reloading / Annealing Rifle Brass - Do you do it? Why?
« on: December 08, 2020, 12:23:49 AM »
Let us know the results on effects of annealing. I think their backlogged a couples of weeks but so is the range.   :( :( :( :( :( :( :( :( :(

https://www.facebook.com/annealeez
5
Reloading / Re: .308 Win Load Data Recipes
« on: December 07, 2020, 07:45:59 PM »
If you are going to neck size only try the Lee Collet die and measure the concentricity before and after. Setup correctly you'd be surprised how little to no run out you get on the case neck. 

Concentricity is another rabbit hole that you may to choose to jump into.

At what point or range does concentricity affect accuracy? How much runout is acceptable for a certain distance?
6
Reloading / Re: Annealing Rifle Brass - Do you do it? Why?
« on: December 07, 2020, 01:55:55 PM »
Quote from: drck1000 on December 07, 2020, 01:18:00 PM
Also if experience or feedback is specific to bolt guns or semi-autos.

My context is bolt guns, but understand lots of folks also pursuing for semi-autos.
Sorry question was pertaining to bolt guns.   
7
Reloading / Annealing Rifle Brass - Do you do it? Why?
« on: December 07, 2020, 01:10:13 PM »
Anyone neck turn brass for a factory chamber? Why or why not? Any measurable results?
8
Reloading / Re: Annealing Rifle Brass - Do you do it? Why?
« on: December 07, 2020, 11:14:26 AM »
9
Reloading / Re: Annealing Rifle Brass - Do you do it? Why?
« on: December 06, 2020, 07:52:11 PM »
some good info on this website, extremely technical info.

https://www.ampannealing.com/articles/
10
Reloading / Re: .308 Win Load Data Recipes
« on: December 06, 2020, 07:40:17 PM »




11
Reloading / Annealing Rifle Brass - Do you do it? Why?
« on: December 06, 2020, 05:27:44 PM »
This is interesting info...

Neck tension



Annealing

12
Firearms and Accessories / Re: First Gun(s) Advice Needed
« on: October 18, 2016, 02:08:12 PM »
Spend what's in your budget and practice with it. Go to a large store with a lot in inventory and feel each gun. Don't get tricked into buying more gun than you actually need for your intended purpose.

Feel the diff between a 19 and 17 as the grip angle is slightly diff because of the size.

SEC had some used Glock 17 gen 3 on consignment for about $350 I think.

Dry fire a lot and go to the range to get use to how the gun recoils and feels when fired.

13
General Discussion / How's the line at HPD?
« on: September 19, 2016, 06:26:48 PM »
Isn't this post about "how's the line at HPD" not where can I shoot my shotgun.
14
Reviews / Hawaii on target BUYER BEWARE!
« on: May 31, 2016, 03:42:14 PM »

Sad that this guy does business like that.
15
General Discussion / Re: New Change in Firearm Paper Work at HPD
« on: December 29, 2015, 01:56:19 PM »
I heard HPD stopped that request.... Back to normal per OGC post
16
General Discussion / New Change in Firearm Paper Work at HPD
« on: November 26, 2015, 12:09:47 AM »
So what if you say your at queens? Can they verify any info?
17
Deals and Sales / Spring precision
« on: February 27, 2015, 10:26:00 AM »
Great assortment at a reasonable price.


http://shop.springerprecision.com/product.sc?productId=247&categoryId=30
18
Security Equipment Corp. / Re: In Stock Reloading Supplies Updated 10/16/13
« on: February 09, 2015, 04:12:07 PM »
Got bottles of varget sitting on the shelves
19
General Discussion / getting Bulk ammo in Vegas
« on: January 24, 2015, 08:58:19 PM »
2 miles out of city limits you can shoot as far as you like. Just place your target and drive 1 mile away and shoot at it....

If you have a skeet or trap gun they have like 15 areas, insanely huge and they have a night shoot just not sure what day it was on. When u drive up to the pistol area all the way in the back u will see how large that place is.... Best part is the  stadium lights...

PS is it windy they close the range sometimes because of the dust storm....
20
General Discussion / getting Bulk ammo in Vegas
« on: January 23, 2015, 08:29:11 PM »
Bass pro caps you on the amount you can purchase. Lucky we found 8 boxes of 9mm to buy but everywhere was sold out back in June... Lot of guns stores in Vegas, call around and see if you can buy in bulk over the phone.  Some local shooters buy in bulk and have it shipped in to vegas. At least that's what they told us....

Go to the Monday night steel challenge run by Pete At Clark county... Really good fun but call ahead just to double check its not cancelled...


http://www.iscopellc.com/events.html
Pages: [1] 2 3 ... 45