Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Rhed

Pages: [1] 2
Reloading / Lapua 6.5 creed SRP in stock!!
« on: August 04, 2022, 01:09:56 PM »

Wow! That’s been outta stock for a very long time. Now it’s slowly coming back.
Anyways, for you creedmoor guys who likes to push these projectiles to its velocity limits. Get em before they go out quickly.. then outta stock for over a year again.. 😂
Reloading / 155 Palma (#2156) or 175 smk for 1000 + yards
« on: June 24, 2022, 05:02:58 PM »
Has anyone has had any experience with these weights? Doing a new load development for a Bartlein 26” .308 1-10 twist. I have both of these weights in 500/box each. One of those panic buys I did lol. Anyways, I know there’s a ton of info on this two on the web, wondering if anyone shot them. And I can’t find any small rifle prime .308 brass. I guess ideally for pushing the Palmas at high mv?
Reloading / What’s really going on with powders coming here?
« on: June 22, 2022, 09:55:14 PM »
Anyone know what the hell is going on? Why there’s no powders coming to Hawaii? Brownells and other online retailers seem to have in stock weekly. Like we can get our illegal fireworks but we can’t get powders?
General Discussion / Best YT video I’ve ever watched!
« on: September 10, 2021, 06:27:09 AM »

General Discussion / Hawaii not on the 2A sanctuary list?
« on: April 20, 2021, 10:18:14 PM »
Why are we not listed on the 2nd Amendment sanctuary map?
Firearms and Accessories / Rifle sleds?
« on: January 24, 2021, 10:08:08 PM »
Anyone used a sled to help zero in and especially use for working up reloads? Sometimes, I feel like maybe my scope is not set right. Or my reloads are ok but many flyers cause human error. Then I blame myself cause don’t know how to shoot. Or my rifle just shoots bad. But I do wanna at least eliminate some of the errors down. I recently just found out that shooting with a bipod on a bench is not good. I think my sh!t jumps from recoil using a bipod on a bench. No mater how much I load the bipod. Or just a standard front rest with rear rest would suffice? Something like this.. Thoughts and opinions please.. Thanks :shaka:
Reloading / Holland’s Perfect Primer Seater adapter unit
« on: December 27, 2020, 08:57:09 AM »
Picked up this primer seater kit to incorporate it with my RCBS bench primer seater. It’s not a CPS, but the machining and built on this is pretty impressive. And since I already have the RCBS bps, I figured why not. It also comes with this nice gauge to check seating depths. Checked some of recent reloads I did, and to my surprise it was seated too deep and depth measured all over the place. Been seating primers by feel all this time. In Holland’s video, any where from 3-5 thousandths below is ideal. I’ve read also that primer seating depths also has something to do with sd. Well, I don’t believe it till I see it. Will do some experiment with that on my next reload.

Deals and Sales / Brownells have TMK’s in stock
« on: December 12, 2020, 03:35:09 PM »

77 gr and 168 gr. Man, those 77 gr TMK’s is the shit. I’ve tried smk hpbt, Nosler CC. But the TMK’s shoots way better.
General Discussion / Pu’uloa and or SRGC
« on: August 16, 2019, 12:50:21 AM »
Are these the only range that can shoot further then 100 yrds here in Oahu? I just want to shoot past 100 yrds. Practice kind, no competition. But seems like a lot of process just to go to these ranges. Is it difficult to join or shoot there? My wife only has a CAC card. She works part time at Shafter. But her card can get us in all the bases. That’s about it though.
Reloading / Anyone ordered and tried these factory 2nds?
« on: August 14, 2019, 09:12:31 PM »
Anyone tried these? I don’t even know the manufacturer of these 2nds. But, 77, 168, and 175 gr. Not bad pricing for 500. I’m wondering if these are Sierra? Thoughts?
General Discussion / Veteran gets kicked out of a Maui restaurant?
« on: July 18, 2019, 10:25:41 PM »
I dont normally watch UR on YouTube. And I don’t believe everything on YouTube also. But I did run into this video. About a subscriber to UR channel gets kicked out of a Maui restaurant. For using a UR shirt?

Firearms and Accessories / Ordering from Grafs & Sons?
« on: February 14, 2019, 09:21:12 PM »
Anyone ordered anything from them recently? I never did. And I was going to. But at the last step of purchase, it didn’t give me a total with shipping. Even though I chose 7.95 ground. It said once I confirm, it will total everything up with shipping since I live outside of 48 states. Also, they will charge sales tax too per new law. wtf? Sheez! Yesterday, I ordered a T7 press from brownells, no tax, and free 2nd day air (well that’s with my Edge club). But still! I just hate to finalize my order from grafs then get a 40$ shipping slapped on with tax by surprise.
I’m thinking of getting a sonic cleaner. Like the one from Hornady. Mostly to clean rifle uppers like after every 3rd trip out. With normal barrel cleanings after every trips. Occasionally lowers. And pistols too. Any up’s and down sides with sonic cleaners? Is it worth it?
Reloading / Where else to get bullets?
« on: July 21, 2018, 04:25:26 PM »
Any other online to get bullets from? SPS been out of 30 cal for awhile. Specifically 168 gr I’m looking for. There’s a few online, but most of them charge outrageous for shipping. Shipping gets more expensive if purchase 500+ bullets. Anyways, was just gonna go brownells since they have Sierra hpbt on sale now if you buy bulk. Any where else I should look? Thanks..
General Discussion / Anyone knows where for ceramic coating?
« on: June 08, 2018, 11:20:40 AM »
Just got a new truck for my son to drive something. And wanted to know if anyone knows where I can go to get ceramic coating? I seen a local shop here online, but they asking 1000+. I was thinking of going Street Shine next to Kap. 24 hr fit. They charge 500. But I heard they just started doing it. Anyone know anywhere else?
General Discussion / Hold off on getting another AR?
« on: March 27, 2018, 10:15:06 AM »
So, with all this ban AR s**+ going on, is it a bad time to even get another one? And say for instance it becomes unfortunate that it does pass? Will it come to the point that we have to turn in our guns? Or we get to keep what we have but can’t shoot it in a range. Or at any private land for that matter?
Reloading / Maintenance on dies
« on: October 01, 2017, 12:37:43 PM »
How often does dies need maintenance or cleaning? And what solvents used if any?
Deals and Sales / Chargemaster lite and free shipping
« on: October 01, 2017, 07:01:01 AM »
Thinking of picking up another one to speed things up. Anyone thinking about one, don't hasitate.. get it. It's a good tool..  :shaka:
Pages: [1] 2