i'm going to try some 9mm with SMPP next time just to see if its reliable in my obsolete G19

i'm going to try some 9mm with SMPP next time just to see if its reliable in my obsolete G19

Let me know when you do the testing.   

Let me know when you do the testing.   

will do.  probably not for a couple weeks.  no time to reload before that.   

Standing by for after action rep

 

i'm going to try some 9mm with SMPP next time just to see if its reliable in my obsolete G19

will do.  probably not for a couple weeks.  no time to reload before that.   

No rush.  A video will be great (as always). 

Don't expect any problems.  Just good get feedback on experiences.  I'll get around to that eventually, but I've been focused on loading for 308. 

i'm going to try some 9mm with SMPP next time just to see if its reliable in my obsolete G19

Did the cancel culture get to your Glock 19?

Sent from my SM-A102U using Tapatalk

Did the cancel culture get to your Glock 19?

Sent from my SM-A102U using Tapatalk

could be.  but i dont know why.  my G19 is down with racial equality.   

Black guns matter!

Black guns matter!

 

Stang - Update on testing for magnum primers?  I was thankfully able to get more SPP, but I'm still planning on loading up 9 mm with the SPP magnum primers.  But will start with SPP first. 

Stang - Update on testing for magnum primers?  I was thankfully able to get more SPP, but I'm still planning on loading up 9 mm with the SPP magnum primers.  But will start with SPP first.

sorry, didn't get around to doing that yet.  been loading some 357 and 44mag lately
maybe in a week or 2 i'll get back to the 9mm

sorry, didn't get around to doing that yet.  been loading some 357 and 44mag lately
maybe in a week or 2 i'll get back to the 9mm

All good.  Was just wondering.  I know you think .357 and .44 Mag are more seksi. . . 

I'm still occupied with reloading for .308 for the near future, but will hopefully start 9 mm soon.

Stang - Update on testing for magnum primers?  I was thankfully able to get more SPP, but I'm still planning on loading up 9 mm with the SPP magnum primers.  But will start with SPP first.

i have not loaded the 9mm using magnum primers, but i have reloaded low level 44mag and 357 mag using magnum primers without a problem.  such as trail boss or other lower pressure loads.  but i dont see this as the same as 9mm with magnum primers
bc i am shooting the low pressure magnum loads out of a magnum revolver, and i assume the hammer strikes are heavier in the magnum revolvers vs in my Glock19.  i dont know this for a fact, but just seeing as the DA trigger is much heavier in the magnum revolvers than the Glock19,
i think the only worry i have with the G19 is getting light primer strikes using magnum primers
next week i have an extra day off so maybe i can do some reloading then.   

i have not loaded the 9mm using magnum primers, but i have reloaded low level 44mag and 357 mag using magnum primers without a problem.  such as trail boss or other lower pressure loads.  but i dont see this as the same as 9mm with magnum primers
bc i am shooting the low pressure magnum loads out of a magnum revolver, and i assume the hammer strikes are heavier in the magnum revolvers vs in my Glock19.  i dont know this for a fact, but just seeing as the DA trigger is much heavier in the magnum revolvers than the Glock19,
i think the only worry i have with the G19 is getting light primer strikes using magnum primers
next week i have an extra day off so maybe i can do some reloading then.   

The function is something I was wondering about too.  I read where factory springs have typically been ok.  I shoot mostly factory springs, so was thinking I'd be ok.  Now that I have more SPP, I may save the magnums for the cartridges they were meant for. 

i'm going to try some 9mm with SMPP next time just to see if its reliable in my obsolete G19

Finally got around to loading 40 rounds of 9mm with SPP magnum
All 40 rounds fired without a hiccup. No problem
Primer cci 550 spp magnum
Powder titegroup 4.8 grains
Bullet everglades ammo 115 grain plated #2 (heavy plated, .356 diameter)
OAL 1.125"
My conclusion is magnum primers work with the stock springs in a Glock19 

Finally got around to loading 40 rounds of 9mm with SPP magnum
All 40 rounds fired without a hiccup. No problem
Primer cci 550 spp magnum
Powder titegroup 4.8 grains
Bullet everglades ammo 115 grain plated #2 (heavy plated, .356 diameter)
OAL 1.125"
My conclusion is magnum primers work with the stock springs in a Glock19 

Awesome. I think I have the same Everglades boolits. Were you able to compare with factory 115 gr?

I have some CCi regular SPP, so will start with that. But I am looking forward to testing the magnum SPP too.

Awesome and Much Mahalo Stangzilla for the data.

Finally got around to loading 40 rounds of 9mm with SPP magnum
All 40 rounds fired without a hiccup. No problem
Primer cci 550 spp magnum
Powder titegroup 4.8 grains
Bullet everglades ammo 115 grain plated #2 (heavy plated, .356 diameter)
OAL 1.125"
My conclusion is magnum primers work with the stock springs in a Glock19