Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - esk808

Pages: [1] 2
1
Red Letter Industries / Is there a glossy cerakote?
« on: September 19, 2023, 04:16:01 PM »

I have a bolt knob for an Anschutz rifle which was hydro-dipped. 
I took off the plastic coating, and want it to have a "glossy gun blue" type of cerakote.  Is there such a thing?

thanks
2
Firearms and Accessories / Anyone do hot bluing for firearms?
« on: September 12, 2023, 11:44:36 PM »
Wondering if any of the LGS or gunsmiths on Oahu do hot gun bluing?

I know that I can go to a LGS and pick up some bluing in a plastic bottle, but I really want
a deep blue and a professional job.

Any suggestions appreciated.
3
Reviews / SEB NEO-X shooting rest
« on: May 26, 2023, 12:47:53 PM »

Finally arrived

Waited since June 2022.

Gotta take it home and see how it works.

Got 3 different front bag setups: 1-piece regular bag,  2-piece, and 3-piece with Teflon side,






4
Reviews / KING KONG March Scope: 8-80x 56mm
« on: February 14, 2023, 04:12:40 PM »
5

I will be sending my rifle (stock & barreled action) to a gunsmith in Las Vegas.

Will the gunsmith need to be an FFL licensed entity?  If he is not an FFL, do I need to send it to his FFL?

Does UPS or FedEx accept a shipment-ready box with a rifle in it?

(I thought I read somewhere that UPS or FedEx will not be accepting firearms for shipment by individuals??)
6
Firearms and Accessories / What's a good hard rifle case?
« on: December 18, 2022, 11:18:11 PM »

Until now, I never had the need for a hard rifle case, but I will be shipping my rifle to Las Vegas for a new stock fitting.

Anschutz BR50 rifle, no scope.

What's a good rifle case besides Pelican?

What's everyone using?
7
I thought I saw a blog in 2A about gunsmiths or stock makers who bed actions, but I can't seem to find it now.

I am getting a stock made for an Anschutz 54.30 action & barrel.
It will be inletted, but no epoxy-bedding.

I would like to find a stock maker or gunsmith to do this locally....  any suggestions?

Thanks.
8
Subcompacts all have barrels of about 3" or so.

What's your ammo choice for short barrels?  +P?  +P+?

Which LGS has them?


I only have 115 & 124gr FMJ for practice, and none of the "good stuff".................... ::)
9
Firearms and Accessories / New SEB front rest
« on: June 07, 2022, 09:29:08 PM »
Amazing new rest from SEB.

I requested to be placed on the waiting list for this one.

https://www.facebook.com/sebastian.lambang



10
Any Anschutz 2013 rifle owners in Honolulu? 
I've seen 2 or 3 Anschutz 2013s on the Kokohead range, but don't know who they are.

I have an "old" Lilja barrel that came with the rifle when I bought it in July 2020.
This rifle and barrel was Steve Boelter's personal rifle.

Steve said the barrel was very accurate.

If you own an Anschutz 2013 and would like to try the barrel, I can help you take off and
put on this barrel.

If it shoots well in your rifle, I would let the barrel go for a small amount of $$.
If it doesn't shoot well, just return it.

Elton
esk808@cs.com

(Barrel is just sitting in my safe. I have a new Lilja barrel on my rifle and a Benchmark barrel coming in a few weeks.)
11
I'd like to see some amazing wood stocks that are floating in Honolulu.
Seen a couple of beautiful stocks on some rifles at Kokohead.

A picture and explanation of the type of wood and finish will be great.

Here goes:

Plain walnut stock, just buffed with Renaissance Wax many many times.
Natural coffee color.

12

Can anybody identify this rifle cradle? 

I tried to Google this but come up with botchos (zero).


https://www.realavid.com/product/level-right-pro/
13
I'm thinking of buying a Krieger Barrel Blank, 28" straight HB SS barrel 1.250" diameter.

I need a gunsmith to cut a tight match chamber and crown the muzzle for a 2013 Anschutz action

The barrel has to be cut like this:






Thanks for your help.

elton
14

Does anyone know of a machinist or a machining company to repair a shooting rest legs (leveling knobs) ?

Two sharp points broke off and I need a machinist to bore a new hole and place a sharp peg into it.

Any machining company you have used before?

Thank you.
15
From the Anschutz Custom Shop:

Bought a modified Anschutz 2013 action rifle in a Shehane laminated stock, no barrel included.
Got a Lilja 29" SS barrel from ACS before they shipped it to HNL.


This rifle and rest was used to test 22LR barrels by the Anschutz Custom Shop, but I will
use this setup to test different ammo in a particular barrel.

The 1-piece shooting rest is from Accu-Shot in Louisiana.
Has 3 different bubble levels and is really heavy.

Have to think of how to carry it up the Kokohead incline to the shooting benches........ :crazy:

Barrels can be changed without removing the action from the stock.
5018 trigger configured to single stage, 2oz.
I've been looking for a 2013 to complete my Anschutz BR rifle set.

Rifle and rest are not new, but the Custom Shop has assured me that the rifle will be "refreshed" and up to specs.

Shipping costs going to be skyhigh.






16
Firearms and Accessories / SIG P365 Any 2aHawaii owner opinions?
« on: April 01, 2020, 04:27:42 PM »
Just got this today.

Can't shoot it until Kokohead opens up....... maybe May 1st  :'(  ???


In the meantime, would appreciate any opinions of P365 owners who have shot their pistols...........

Going to send it to grayguns.com for action tuning and straight trigger... waiting for them to tell me to ship the pistol.

Thanks.


17
Firearms and Accessories / What is HPD's 9mm brand/weight?
« on: March 26, 2020, 05:32:46 PM »
Just curious to see what Honolulu's finest in blue uses............

Maybe the Golden Saber 124gr?
18
Firearms and Accessories / Rifle Stock Finish. Stock Maker Recommendations?
« on: February 23, 2020, 11:23:26 PM »
I have a rifle stock which had a nice satin clear finish.

I tried to "make it nicer" with  Birchwood Casey Tru-Oil, but it made a thick, sticky looking type of finish.

Anybody have suggestions?     Or possibly a stock maker who could refinish the stock for me?

Thanks.
19
Firearms and Accessories / Lapua X-Act 22LR ammo
« on: November 01, 2019, 02:03:10 PM »

Ammo arrived today.

Finally get to test the proverbial silver bullet.

Hope conditions are good at Kokohead this weekend.....
20
Reviews / Sichtkraft Wind Flags
« on: January 25, 2019, 02:52:53 PM »
I posted these wind flags in "Post Your Latest Purchase", but I thought to post them again here for more exposure.

Kokohead is pretty much windy all year round, and you'd be surprised that the wind shifts on the left-hand side of the rifle range something ferocious, because the on-shore wind bounces off the left-hand side hollow tile wall, making the wind go left and right. 

The right-hand side of the rifle range is pretty much stable, meaning that the wind doesn't shift as much as on the left-hand side.  When I used small survey flags, the 50-yard flag would blow to the left, and the 25-yard flag would blow to the right !   Hard to figure out.

Problem is, on the right-hand side, the shooter has a steeper angle shooting down towards the 50-yard targets.

I ordered these wind flags from Germany on December 14, 2018, and they arrived January 23, 2019.

They should give me wind direction and relative wind strength at Kokohead.

They are height-adjustable.

                                     https://shop.sichtkraft.com/en/wind-flag-50m-issf-type.html

It is "Made in Germany", not "Made in China" so quality is top-notch.  Very well made, well thought-out, and the flags swivel (showing wind direction).

Sichtkraft has become a member of 2aHawaii as "sichtkraft" so you can PM the owner, Tilman Bremer, anytime from this site.
Pages: [1] 2