1
Off Topic / slippery-sloopy
« on: May 13, 2024, 07:48:37 AM »
FLASHBACK 
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Off Topic / google wizard
« on: April 26, 2024, 04:19:15 PM »
Anybody out there do Google advertising ?
May have a client for you.
May have a client for you.
4
Events / Safety and LTC classes Saturday March 30
« on: March 28, 2024, 09:57:21 AM »
Short notice but I got the range day.
Setting up a combination class' Saturday March 30th which includes 2024 Safety Course & 2024 License To Carry.
Safety only (2024 version now required for firearm Permit to Acquire a Handgun)
$200 + $50 Range fee, you provide your own ammo
100 rounds for Safety range time,
$250 + $50 range fee if I provide ammo (9mm only) for safety class.
Safety and LTC (Both 2024 version's now required for License to Carry)
Must already have registered handgun
$250 + $50 Range fee, you provide your own ammo.
100 rounds for Safety range time + minimum 25 rounds per gun for LTC.
$300 + $50 range fee if I provide ammo (9mm only) for safety class, you provide minimum 25 rounds for your gun(s) for LTC Proficiency.
DM with phone # or Email HaleLaie@aol.com for more info
Setting up a combination class' Saturday March 30th which includes 2024 Safety Course & 2024 License To Carry.
Safety only (2024 version now required for firearm Permit to Acquire a Handgun)
$200 + $50 Range fee, you provide your own ammo
100 rounds for Safety range time,
$250 + $50 range fee if I provide ammo (9mm only) for safety class.
Safety and LTC (Both 2024 version's now required for License to Carry)
Must already have registered handgun
$250 + $50 Range fee, you provide your own ammo.
100 rounds for Safety range time + minimum 25 rounds per gun for LTC.
$300 + $50 range fee if I provide ammo (9mm only) for safety class, you provide minimum 25 rounds for your gun(s) for LTC Proficiency.
DM with phone # or Email HaleLaie@aol.com for more info
5
Events / Safety and LTC classes Saturday March 23
« on: March 19, 2024, 10:16:41 AM »
Saturday, March 23, 8am North Shore
Safety only (2024 version now required for firearm Permit to Acquire and Joint Registration)
$200 + $50 Range fee, you provide your own ammo
100-150 rounds for Safety range time,
$300 + $50 range fee if I provide ammo (9mm and .38 only) for safety class.
LTC only (2024 version now required for License to Carry)
Must already have registered handgun
$200 + $50 Range fee, you provide your own ammo.
100-150 rounds for Safety range time + minimum 25 rounds per gun for LTC.
$250 + $50 range fee if I provide ammo (9mm and .38 only) for safety class, you provide minimum 25 rounds for your gun(s) for LTC Proficiency.
Safety and LTC (2024 version now required for License to Carry)
Must already have registered handgun
$250 + $50 Range fee, you provide your own ammo.
100-150 rounds for Safety range time + minimum 25 rounds per gun for LTC.
$300 + $50 range fee if I provide ammo (9mm only) for safety class, you provide minimum 25 rounds for your gun(s) for LTC Proficiency.
We usually have extra range time post class.
Rocky
Safety only (2024 version now required for firearm Permit to Acquire and Joint Registration)
$200 + $50 Range fee, you provide your own ammo
100-150 rounds for Safety range time,
$300 + $50 range fee if I provide ammo (9mm and .38 only) for safety class.
LTC only (2024 version now required for License to Carry)
Must already have registered handgun
$200 + $50 Range fee, you provide your own ammo.
100-150 rounds for Safety range time + minimum 25 rounds per gun for LTC.
$250 + $50 range fee if I provide ammo (9mm and .38 only) for safety class, you provide minimum 25 rounds for your gun(s) for LTC Proficiency.
Safety and LTC (2024 version now required for License to Carry)
Must already have registered handgun
$250 + $50 Range fee, you provide your own ammo.
100-150 rounds for Safety range time + minimum 25 rounds per gun for LTC.
$300 + $50 range fee if I provide ammo (9mm only) for safety class, you provide minimum 25 rounds for your gun(s) for LTC Proficiency.
We usually have extra range time post class.
Rocky
6
Events / Safety / LTC class February 17th and February 24th
« on: February 08, 2024, 12:12:54 PM »
As of January 1, 2024 rules changed and 2024 safety class required for, Permit To Acquire, License To Carry, License To Carry Renewal.
Setting up a combination class' Saturday Feb 17th and February 24th which includes 2024 Safety Course & 2024 License To Carry in the North Shore area
Safety only (2024 version now required for firearm Permit to Acquire a Handgun)
$200 + $50 Range fee, you provide your own ammo
100 rounds for Safety range time,
$250 + $50 range fee if I provide ammo (9mm only) for safety class.
Safety and LTC (Both 2024 version's now required for License to Carry)
Must already have registered handgun
$250 + $50 Range fee, you provide your own ammo.
100 rounds for Safety range time + minimum 25 rounds per gun for LTC.
$300 + $50 range fee if I provide ammo (9mm only) for safety class, you provide minimum 25 rounds for your gun(s) for LTC Proficiency.
Setting up a combination class' Saturday Feb 17th and February 24th which includes 2024 Safety Course & 2024 License To Carry in the North Shore area
Safety only (2024 version now required for firearm Permit to Acquire a Handgun)
$200 + $50 Range fee, you provide your own ammo
100 rounds for Safety range time,
$250 + $50 range fee if I provide ammo (9mm only) for safety class.
Safety and LTC (Both 2024 version's now required for License to Carry)
Must already have registered handgun
$250 + $50 Range fee, you provide your own ammo.
100 rounds for Safety range time + minimum 25 rounds per gun for LTC.
$300 + $50 range fee if I provide ammo (9mm only) for safety class, you provide minimum 25 rounds for your gun(s) for LTC Proficiency.
7
Off Topic / .35-.357 air gun
« on: February 07, 2024, 01:42:43 PM »
Any body have a .357 air gun ?
8
General Discussion / Cut slides
« on: February 01, 2024, 10:58:58 AM »
Is it cheaper (and acceptable) to cut slide rather than buy new ?
Considering red dot (latest Holosun, Tridge) on my G19 Gen3 but need slide/cut slide
Considering red dot (latest Holosun, Tridge) on my G19 Gen3 but need slide/cut slide
9
Events / January 13, 2024 Safety / LTC class
« on: January 14, 2024, 11:29:24 AM »
Nice class yesterday Ya'll. 
Will have your respective affidavits by Monday, Jan 15 1pm.
You may schedule to pick up or notify me by Email if you want me to mail it.
Rocky
Will have your respective affidavits by Monday, Jan 15 1pm.
You may schedule to pick up or notify me by Email if you want me to mail it.
Rocky
10
Off Topic / New Years PERFECT PRIME RIB EVERYTIME
« on: January 01, 2024, 10:55:26 AM »
Yearly Tradition 
prime rib roast with or without bone (any size)
bottom round center cut
Preheat oven to 550°F degrees.
Make a rub of salt, pepper and garlic powder and apply to meat. Place meat in a shallow roasting pan fat side up.
Roast at 550°F at 5 minutes per pound for RARE, or 6 minutes per pound for MEDIUM and 7 minutes per pound for WELL DONE.
Turn off oven at the end of cooking time and DO NOT OPEN OVEN DOOR FOR TWO HOURS.
At the end of the 2 hours, remove meat from oven to slice; it comes out perfect every time.
Works the same with Roast beef. The next time you want an easy hands-off, tender and juicy roast, try this recipe - you won't be disappointed!
Yorkshire Pudding Recipe
• Yield: Serves 6.
Add to shopping list
Ingredients
• 1 cup flour
• 1/2 teaspoon salt
• 1 cup milk
• 2 Tbsp melted butter
• 2 eggs, beaten*
• 2-4 Tbsp of roast drippings
Method
1 Sift together the flour and salt in a large bowl. Form a well in the center. Add the milk, melted butter, and eggs and beat until the batter is completely smooth (no lumps), the consistency of whipping cream. Let sit for an hour.
2 Heat oven to 450°F. Add roast drippings to a 9x12-inch pyrex or ceramic casserole dish, coating the bottom of the dish. Heat the dish in the oven for 10 minutes.
For a popover version you can use a popover pan or a muffin pan, putting at least a teaspoon of drippings in the bottom of each well, and place in oven for just a couple minutes.
3 Carefully pour the batter into the pan (or the wells of muffin/popover pans, filling just 1/3 full), once the pan is hot. Cook for 15 minutes at 450°F, then reduce the heat to 350°F and cook for 15 to 20 more minutes, until puffy and golden brown.
Cut into squares to serve.
prime rib roast with or without bone (any size)
bottom round center cut
Preheat oven to 550°F degrees.
Make a rub of salt, pepper and garlic powder and apply to meat. Place meat in a shallow roasting pan fat side up.
Roast at 550°F at 5 minutes per pound for RARE, or 6 minutes per pound for MEDIUM and 7 minutes per pound for WELL DONE.
Turn off oven at the end of cooking time and DO NOT OPEN OVEN DOOR FOR TWO HOURS.
At the end of the 2 hours, remove meat from oven to slice; it comes out perfect every time.
Works the same with Roast beef. The next time you want an easy hands-off, tender and juicy roast, try this recipe - you won't be disappointed!
Yorkshire Pudding Recipe
• Yield: Serves 6.
Add to shopping list
Ingredients
• 1 cup flour
• 1/2 teaspoon salt
• 1 cup milk
• 2 Tbsp melted butter
• 2 eggs, beaten*
• 2-4 Tbsp of roast drippings
Method
1 Sift together the flour and salt in a large bowl. Form a well in the center. Add the milk, melted butter, and eggs and beat until the batter is completely smooth (no lumps), the consistency of whipping cream. Let sit for an hour.
2 Heat oven to 450°F. Add roast drippings to a 9x12-inch pyrex or ceramic casserole dish, coating the bottom of the dish. Heat the dish in the oven for 10 minutes.
For a popover version you can use a popover pan or a muffin pan, putting at least a teaspoon of drippings in the bottom of each well, and place in oven for just a couple minutes.
3 Carefully pour the batter into the pan (or the wells of muffin/popover pans, filling just 1/3 full), once the pan is hot. Cook for 15 minutes at 450°F, then reduce the heat to 350°F and cook for 15 to 20 more minutes, until puffy and golden brown.
Cut into squares to serve.
11
General Discussion / Time saver
« on: August 04, 2023, 09:33:59 AM »
After 15 yrs, little O-rings in bathroom faucet cartridges failing and faucet leaking.
Set screws to remove handles to replace little o-ring frozen in handle.
Tried tri-flow, calcium/lime remover and even contemplated pin point torching before deciding to just replace faucets.
Local hardware had crap and I really hated to drive all the way into town to just go to Lowes or HD (3 hrs/65 miles) so I ordered on line from Lowes.
Ordered 12:43 pm, delivered 4:44 pm the next day.
Set screws to remove handles to replace little o-ring frozen in handle.
Tried tri-flow, calcium/lime remover and even contemplated pin point torching before deciding to just replace faucets.
Local hardware had crap and I really hated to drive all the way into town to just go to Lowes or HD (3 hrs/65 miles) so I ordered on line from Lowes.
Ordered 12:43 pm, delivered 4:44 pm the next day.
12
13
General Discussion / HPD Car Jacked
« on: February 17, 2023, 09:20:01 AM »
Two blocks away from me.
https://news.yahoo.com/hpd-officer-injured-laie-suspect-045200823.html
https://news.yahoo.com/hpd-officer-injured-laie-suspect-045200823.html
14
General Discussion / Hawaii License to Carry
« on: January 14, 2023, 07:29:59 AM »
If you've already pm'd to attend my Hawaii License to Carry class, please go back to post n EVENTS and use the Email address.
15
General Discussion / Range Day for New, First Time Gun Owners
« on: January 14, 2023, 07:24:53 AM »
If you've already pm'd to attend this event, please go back to post n EVENTS and use the Email address.
16
General Discussion / rapback refund
« on: January 09, 2023, 04:06:22 PM »
Any body get their rapback money back ?
17
Preparedness and Survival / Kaneohe /Kahalu'u CERT Training
« on: January 04, 2023, 07:33:45 PM »
Kaneohe /Kahalu'u CERT Training
Dept. of Emergency Mgt. has
https://www.eventbrite.com/e/491904538717
as the link for Kaneohe/Kahaluu's training registration.
First class is scheduled for next Saturday, 1/14.
If you've already registered - I'll see you next week.
Any questions, please call
Marie
808-239-2212 (h)
808-227-0689 (c)
or email me at kkcertsos@gmail.com
or
Lead Trainer Mark Brandle at markbrandle@yahoo.com
Stay prepared for problems - and recovery!
You do not have to live in the Kaneohe /Kahalu'u area to participate
Dept. of Emergency Mgt. has
https://www.eventbrite.com/e/491904538717
as the link for Kaneohe/Kahaluu's training registration.
First class is scheduled for next Saturday, 1/14.
If you've already registered - I'll see you next week.
Any questions, please call
Marie
808-239-2212 (h)
808-227-0689 (c)
or email me at kkcertsos@gmail.com
or
Lead Trainer Mark Brandle at markbrandle@yahoo.com
Stay prepared for problems - and recovery!
You do not have to live in the Kaneohe /Kahalu'u area to participate
18
Events / LTC, CFP & BPC classes
« on: December 27, 2022, 09:57:48 AM »
Hawaii License To Carry (LTC) classes now available.
Class and Proficiency test's to be held per C.O.P. Rules 15-19 in the Kahuku area.
Classes held most Saturdays but can be held weekdays if enough students.
Several standby slots still be available January7, 14th & 21st.
February forward open.
$200 + $50 range fee.
Range fee waived for Active Military, Active HFD, Active Paramedics, Active Nurses.
Utah CFP ($175) and NRA Basic Pistol ($175) classes also available.
Email HaleLaie@aol.com for more info
Rocky
Class and Proficiency test's to be held per C.O.P. Rules 15-19 in the Kahuku area.
Classes held most Saturdays but can be held weekdays if enough students.
Several standby slots still be available January
February forward open.
$200 + $50 range fee.
Range fee waived for Active Military, Active HFD, Active Paramedics, Active Nurses.
Utah CFP ($175) and NRA Basic Pistol ($175) classes also available.
Email HaleLaie@aol.com for more info
Rocky
19
General Discussion / not the present she wanted
« on: December 25, 2022, 01:10:05 PM »
Any LGS or private out there with a Stacatto CS or C2 (preferably DUO w/ Halosun HS507 Kor C X2 ?
20
Off Topic / scope zero's
« on: November 07, 2022, 08:02:02 AM »
Did some laser .22 zeroing yesterday.