2aHawaii
Tools and Uses => Reloading => Topic started by: BLKDRGN on August 28, 2013, 06:09:04 PM
-
I am totally a noob on reloading. In fact I only did about 5 minutes research. I want one that is really good and capable of doing lot's of different calibers. I really don't want to have multiple machines if possible. I looked up Dillon and saw the XL650 model. Is that one of the best out there? How come it's not motorized and I got to do manual work? lol
https://www.youtube.com/watch?v=9oPVfUea70s&feature=youtu.be (https://www.youtube.com/watch?v=9oPVfUea70s&feature=youtu.be)
-
Start with something simpler to get the process down.
Find a buddy who reloads or ask one the old guys to help you.
They have discussed helping people before.
-
Most press do different calibers, you just gotta change the die sets. The dillon is a good progressive reloader...i would start with single stage press for rifle loads
-
http://www.camdexloader.com/2500Rotary.aspx (http://www.camdexloader.com/2500Rotary.aspx) :shake:
-
I've been hearing that all noobs should get a single stage. Why is that? Is it because we are not capable of learning progressive from the beginning? Is it really that complicated that we have to go single stage first? Only reason why I ask is I don't want to buy a single and then when I get the hang of things after a couple weeks I have to now buy progressive. Is progressive really only for cranking out lots of rounds really fast? I just want something simple but fast. If it was automated it would be even better as in press button and walk away. Does that not exist?
-
ive been using the lee 4 hole turret for years.
the single stage takes way too long.
-
go to wgs check out the turret they got setup.ask for them to show you the run down on it.joe ran it thru its paces for me real quick when i was looking for a press.might be what you want,might not but alteast you can see it up close
-
One day come to my house and I show you my setup. I'm still new at reloading. Lots of reading, researching, and trial and error. Ask questions. I have Dillon 650 for rifle is super fast. I like it alot for deprime, crank and go. Prep rifle is a pain. I also have Dillon 550B for only pistol load. Love it, turn turret back and forth. I tend to be more aware of what i'm doing and take my time. I also got a mec for shotgun. I got Dillon tumbler, its good but next time I would go and do wet tumbler. I learn from single RCBS Rock Chucker and takes alot of time.
-
single stage is more precise for rifle reloading. you can measure every powder drop and bullet seating for consistency. you will be able to load round after round exactly the same. more for precision type shooting.
if you just want to load up ammo in bulk go with the progressive... powder drop and bullet seating may vary very slightly from round to round. handgun rounds do not have to be consistent from round to round.
-
Find a buddy who reloads or ask one the old guys to help you.
WTH OLD GUYS??? LMAO
-
I just asked my friend and he has the Dillion XL 650. Would it be a problem for me to learn from him and skip the single stage?
Edit: He also said he has a single stage for his rifles where he needs more accuracy.
-
That's what I did, but will cost you alot more than a single press.
-
OK for single stage I heard Lee is really good. Is the breach lock Classic Cast model the one to get?
http://leeprecision.com/breech-lock-classic-cast.html (http://leeprecision.com/breech-lock-classic-cast.html)
-
That's the one i started off with. Totally satisfied.
-
I've been hearing that all noobs should get a single stage. Why is that? Is it because we are not capable of learning progressive from the beginning? Is it really that complicated that we have to go single stage first? Only reason why I ask is I don't want to buy a single and then when I get the hang of things after a couple weeks I have to now buy progressive. Is progressive really only for cranking out lots of rounds really fast? I just want something simple but fast. If it was automated it would be even better as in press button and walk away. Does that not exist?
Reloading isn't complicated. I believe you can start out with a progressive press and load a lot of good ammo; go for it. Having a single stage press for pistol rounds is a good idea also. You can experiment with different loads, bullet heads and whatever in small batches. You won't have to be readjusting the progressive press until you've found the magic load using the old rockchucker.
-
I am sort of in the same boat as you, I am going to get into reloading. Trying to decide what type of press I want to get.. etc. I am also considering the Dillon 650, it seems like a great press but if you are just starting out maybe overkill. Personally I would rather pony up the money and just fast forward to what I would eventually want the first time around.
The press is not the only thing you will need though. You'll need a set of good calipers, media tumbler, powder measure, scale,...among many other little tools and accessories.
I think the best place to start is buy yourself a couple reloading handbooks. You're going to need them anyway. Read through them to learn the steps. what equipment you'll need etc. I have been working my way though the Lyman reloading handbook, 49th edition and it does contain alot of good information. Just the first 100 or so pages is about reloading, then the rest of it is reloading data for different calibers.
Everything you'll read says start with a single stage. Since there is less going on at once you will become familiar with the steps and hopefully won't blow something up or hurt yourself in the process. And once you decide to upgrade the single stage will still come in handy for those precision loads. I was talking with a friend the other day who is heavy into reloading and he did tell me just skip a single stage and get a good progressive to start with.
There are plenty of brands out there too, some better than others.
RCBS
Dillon
Redding
Hornady
Lee
Lyman
-
single stage is more precise for rifle reloading. you can measure every powder drop and bullet seating for consistency. you will be able to load round after round exactly the same. more for precision type shooting.
if you just want to load up ammo in bulk go with the progressive... powder drop and bullet seating may vary very slightly from round to round. handgun rounds do not have to be consistent from round to round.
+1 :thumbsup:
-
I've been hearing that all noobs should get a single stage. Why is that? Is it because we are not capable of learning progressive from the beginning? Is it really that complicated that we have to go single stage first? Only reason why I ask is I don't want to buy a single and then when I get the hang of things after a couple weeks I have to now buy progressive. Is progressive really only for cranking out lots of rounds really fast? I just want something simple but fast. If it was automated it would be even better as in press button and walk away. Does that not exist?
=======================
You have many questions so I will dissect your message and post my reply in caps so it will be easier to see.
I've been hearing that all noobs should get a single stage. Why is that?
IT'S EASIER TO LEARN AND YOU WILL FIND THAT CERTAIN OPERATIONS ARE EASIER ON A SINGLE
Is it because we are not capable of learning progressive from the beginning?
NOBODY KNOWS WHAT YOU ARE CAPABLE OF LEARNING
Is it really that complicated that we have to go single stage first?
IT CAN GET COMPLICATED REAL FAST
Only reason why I ask is I don't want to buy a single and then when I get the hang of things after a couple weeks I have to now buy progressive.
Is progressive really only for cranking out lots of rounds really fast?
YES IT IS FOR MAKING AMMO FAST.
BUT LET ME SAY THIS, I HAVE BEEN RELOADING FOR APPROX. 34 YEARS AND I STILL DO NOT "HAVE THE HANG OF THINGS".
I ALWAYS LEARN SOMETHING NEW ABOUT THIS HOBBY.
I just want something simple but fast. If it was automated it would be even better as in press button and walk away. Does that not exist?
NO SUCH THING AS A SIMPLE FAST AUTOMATED RELOADING MACHINE
=================
If you are extremely busy or impatient, I don't recommend getting into reloading.
-
Read lots of reloading books/manual...pay serious attention to the warnings and safety cautions....do not double charge, or go over the max recommended load, start at the minimum or middle of the recommended load (and test it on your gun), watch for signs of pressure when test firing your loads (stop, if there are signs of pressure, ie.really flattened primers, punctured primers, blown cases, etc), do not mix powders, concentrate (do not get distracted), do it slow and cautious at first, double check, check powder level occasionally, pistol powder is for pistol loads, and rifle powder is for rifle loads (there are exceptions, but that's advance level), somebody else's load might not work on your gun,.... be safe
-
When I first started. I asked a lot of questions and still do. Each weapon system is different. I have not found the magic around round yet. Its either not enough powder to recycle properly or over all length to long. Just trial and error. I always want the best of things and decided that if I wanted a single press I would get a RCBS Rock Chucker. Second would be Dillon 550B, Third would be Redding T7. Then if money is not a problem get a Dillon 650 with case feeder. Buy several books. I would get wet tumbler with stainless steel pins. My friends brass is super clean and shine with wet system compare to my walnut media. Get top rated scale. Case trimmer for rifle brass. I got the Giraud Power Case trimmer for bulk. If small amount case trimming I picked up the CTS on a portable drill. Or get a Sinclair Case Stainless steel trimmer. Get case gauge for insurance. I thought I was going to save money but its adding up. Its like buying a rifle and adding a ninja system to it. Dillon 650 case feeder with add accessories, dies, several calibers change, will cost at around $1000. That's just the beginning. More you shoot, more needed brass, more powder, more primer, more bullet head, more time, and more money. Its a hobby by itself.
-
When I first started. I asked a lot of questions and still do. Each weapon system is different. I have not found the magic around round yet. Its either not enough powder to recycle properly or over all length to long. Just trial and error. I always want the best of things and decided that if I wanted a single press I would get a RCBS Rock Chucker. Second would be Dillon 550B, Third would be Redding T7. Then if money is not a problem get a Dillon 650 with case feeder. Buy several books. I would get wet tumbler with stainless steel pins. My friends brass is super clean and shine with wet system compare to my walnut media. Get top rated scale. Case trimmer for rifle brass. I got the Giraud Power Case trimmer for bulk. If small amount case trimming I picked up the CTS on a portable drill. Or get a Sinclair Case Stainless steel trimmer. Get case gauge for insurance. I thought I was going to save money but its adding up. Its like buying a rifle and adding a ninja system to it. Dillon 650 case feeder with add accessories, dies, several calibers change, will cost at around $1000. That's just the beginning. More you shoot, more needed brass, more powder, more primer, more bullet head, more time, and more money. Its a hobby by itself.
yup, but it is fun and it is an integral part of shooting...you will be still be smiling when there's no factory ammo on the shelves :D
-
I just want something simple but fast. If it was automated it would be even better as in press button and walk away. Does that not exist?
NO SUCH THING AS A SIMPLE FAST AUTOMATED RELOADING MACHINE
=================
If you are extremely busy or impatient, I don't recommend getting into reloading.
I would agree with this. I don't have decades of experience or even one single cartridge of experience... But if you just want to get into reloading because you want to save money and be able to make your own bullets but want to just press a button and come back 2 hours later with 5000 rounds all finished.. You probably ought to walk away now. It is a time intensive process and you need to be the kind of person who can sit down and be anal enough to do things like measure out a single grain of powder and check each and every round multiple times throughout the process. Its not a kick back on the couch with the press in one hand and a bag of potato chips in the other watching tv type of hobby.
From what you are describing wanting it to be as fast and easy as possible I get the feeling you might not really enjoy it and will be in over your head quick.
-
I talked to a couple more people and they both said the RCBS Rock Chucker Supreme is better than Lee because it last a lot longer. There is no description on their site about the product.
https://shop.rcbs.com/WebConnect/MainServlet?storeId=webconnect&catalogId=webconnect&langId=en_US&action=ProductDisplay&screenlabel=index&productId=2842&route=C04J146
-
I talked to a couple more people and they both said the RCBS Rock Chucker Supreme is better than Lee because it last a lot longer. There is no description on their site about the product.
https://shop.rcbs.com/WebConnect/MainServlet?storeId=webconnect&catalogId=webconnect&langId=en_US&action=ProductDisplay&screenlabel=index&productId=2842&route=C04J146
+1 RCBS presses are great, they sure last long.
-
I've been hearing that all noobs should get a single stage. Why is that? Is it because we are not capable of learning progressive from the beginning? Is it really that complicated that we have to go single stage first? Only reason why I ask is I don't want to buy a single and then when I get the hang of things after a couple weeks I have to now buy progressive. Is progressive really only for cranking out lots of rounds really fast? I just want something simple but fast. If it was automated it would be even better as in press button and walk away. Does that not exist?
A single stage press is good to learn on because it removes the mechanical portion of reloading out of the equation. Which sometimes can be the cause of frustration and problems while reloading. Get to know reloading first then move on to the more complicated equipment. Also, if you plan to reload for rifle and you want to be as precise as possible you will want to use a single stage for this. Progressive presses are good for putting out large quantities of well prepared ammunition but for the most accurate rifle ammo you may want to weigh each powder charge. Which pretty much nullifies the advantages of the progressive press.
BTW, last week WGS had their Dillon Progressive press at the front of the store that Joe has used for years to reload for sale for $400 for everything!!!! What a deal!!!!!
-
I talked to a couple more people and they both said the RCBS Rock Chucker Supreme is better than Lee because it last a lot longer. There is no description on their site about the product.
https://shop.rcbs.com/WebConnect/MainServlet?storeId=webconnect&catalogId=webconnect&langId=en_US&action=ProductDisplay&screenlabel=index&productId=2842&route=C04J146
Of all the single stages I think the Rock Chucker is the best all around press. Nothing wrong with the Lee it is just a little smaller and does not have the extra long stroke the Rock Chucker has.
-
Of all the single stages I think the Rock Chucker is the best all around press. Nothing wrong with the Lee it is just a little smaller and does not have the extra long stroke the Rock Chucker has.
Opinion on a "kit" versus buying equipment separately?
http://www.cabelas.com/product/RCBS-Rock-Chucker-Supreme-Master-Reloading-Kit/1324071.uts (http://www.cabelas.com/product/RCBS-Rock-Chucker-Supreme-Master-Reloading-Kit/1324071.uts)
-
With respect to this LEE Classic Cast
http://leeprecision.com/classic-cast-press.html (http://leeprecision.com/classic-cast-press.html)
I like the Lee better. It is just as strong as my RockChucker II I had PLUS the spent primers pass through a hollow ram straight to my waste basket. The RockChucker flinged it out and was rather dirty. The LEE Classic Cast is cast iron and is as hefty as the RC. The LEE had more adjustability than the RC. I paid a little more at WGS - $150 than I could get it online shipped - just to support our LGS.
-
Opinion on a "kit" versus buying equipment separately?
http://www.cabelas.com/product/RCBS-Rock-Chucker-Supreme-Master-Reloading-Kit/1324071.uts (http://www.cabelas.com/product/RCBS-Rock-Chucker-Supreme-Master-Reloading-Kit/1324071.uts)
===============
You still gonna need a lot of stuff. That kit is a fine start though. I guesstimate another $200 in stuff easily.
-
Opinion on a "kit" versus buying equipment separately?
http://www.cabelas.com/product/RCBS-Rock-Chucker-Supreme-Master-Reloading-Kit/1324071.uts (http://www.cabelas.com/product/RCBS-Rock-Chucker-Supreme-Master-Reloading-Kit/1324071.uts)
Nothing wrong with buying the kit. I bought the kit 25 years ago. LOL And I have spent he last 25 years replacing almost everything in the kit. For instance the first thing I replaced was the balance beam scale. There was nothing wrong with it. I just wanted a digital scale with the powder trickler attached. I also replaced the funnel with one that works better with multiple calibers. I replaced the plastic dial calipers with a metal digital model that is more accurate. Again, nothing wrong with the dial calipers. I just wanted one that reads to 3 decimal places. I still have the dial calipers and use them to measure my target groups. I got tired of trimming hundreds of cases by hand so I replaced the hand operated model with a powered one. I reloaded thousands of 9mm with that kit and a RCBS Jr press.
-
Maybe, wait until the Gun Show, sometimes somebody will be selling a reloading set-up.
-
Good idea about the gun show. In the mean time my friend has the RCBS and Dillion that I can practice on. I'm pretty sure that he will reload soon since he did about 400 rounds today.
-
I have a lee pro 1000 progressive press from amazon. It very simple and gets the job done and can reload multiple calibers. I reload .38 and .40. Its not the best press but it is very productive producing about 500rds in about an hour while taking my time and breaks. Best of all is it didn't break the bank. You just have go for it and buy everything you need to get goin and try it. Dont spend months thinking and talking about it just go for it. I hear alot of guys wishing they could reload and really want to start but are afraid to get started which is why im telling you to buy everything now. The faster you get the equipment the more motivated youll be to educate yourself on the process and get started. and start saving money on ammo. But do your research so you dont get hurt. Everything you need is online and on youtube. The LEE website has tutorial videos to help you set up the press and get it started. My friend and i started shooting this past january and were reloading in febuary. Its not hard. Make the investment and go for it. Definatly worth it.
-
I talked to a couple more people and they both said the RCBS Rock Chucker Supreme is better than Lee because it last a lot longer. There is no description on their site about the product.
I'm waiting for my Rock Chucker Supreme to arrive. RCBS has a $50 rebate for any sales over $300!
http://www.rcbs.com/pdf/RC316_2013RCBSWebRebateCoupon_FNL.pdf (http://www.rcbs.com/pdf/RC316_2013RCBSWebRebateCoupon_FNL.pdf)
-
I'm waiting for my Rock Chucker Supreme to arrive. RCBS has a $50 rebate for any sales over $300!
http://www.rcbs.com/pdf/RC316_2013RCBSWebRebateCoupon_FNL.pdf (http://www.rcbs.com/pdf/RC316_2013RCBSWebRebateCoupon_FNL.pdf)
Great! :thumbsup:
-
I actually prefer the Lee Hand Press. I'm not shooting much these days, but used to shoot a lot of NRA 100 meter hunter pistol and IHMSA 200 meter metallic silhouette handgun competition, and some bowling pin matches. I used the Lee for all of my reloading including 30/30, 32/20, and .22 Hornet and a bunch of handgun calibers. I like to keep things simple and don't want a progressive. Carbide dies sets help a lot too. I reloaded for myself and a friend for these matches. Here is a youtube showing the Lee press: http://www.amazon.com/exec/obidos/ASIN/B000NOQIFO/?tag=2ahawaii-20 (http://www.amazon.com/exec/obidos/ASIN/B000NOQIFO/?tag=2ahawaii-20)
I don't care about reloading fast. I used my first Lee press so much, I wore it out.