2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: BLKDRGN on September 11, 2013, 05:20:19 PM
-
My friend told me to get one of these bipod mounts for my Remington 700. Problem is that my rifle only has one sling stud. He said to get a mount like below and drill a hole in my stock chassis. Then use a button head bolt and a nut or something on the inside. Does this sound right?
http://www.midwayusa.com/product/976595/atlas-bipod-flush-cup-1913-radius-back-rail-335-steel-black (http://www.midwayusa.com/product/976595/atlas-bipod-flush-cup-1913-radius-back-rail-335-steel-black)
(http://i301.photobucket.com/albums/nn65/blkdrgnphotos/Gun/12E7EF3E-C16F-410E-A31D-A6F9F3CCA790-656-00000039F07E0F24_zps1cbbbd55.jpg)
(http://i301.photobucket.com/albums/nn65/blkdrgnphotos/Gun/8956600C-3676-47EA-9D5E-20C2BFC1C8B9-656-00000039FB0CFB24_zps7ad47d71.jpg)
-
.
-
Just saying that the one you suggested wont fit my bipod. Any other suggestions?
-
.
-
But a Harris or shooters ridge
If you really need a picatinny mount then add a short piece of picatinny rail.
-
easy peasey...
http://forum.snipershide.com/sniper-hide-gunsmithing/17298-how-install-bt17-rail-atlas-bipod-mcm-a5-5.html (http://forum.snipershide.com/sniper-hide-gunsmithing/17298-how-install-bt17-rail-atlas-bipod-mcm-a5-5.html)
-
easy peasey...
http://forum.snipershide.com/sniper-hide-gunsmithing/17298-how-install-bt17-rail-atlas-bipod-mcm-a5-5.html (http://forum.snipershide.com/sniper-hide-gunsmithing/17298-how-install-bt17-rail-atlas-bipod-mcm-a5-5.html)
Ah thanks. parts now on order :geekdanc:
-
OK I got the parts but now ran into another road block. I picked up the curved rail and it fits perfect on my stock chassis.
(http://i301.photobucket.com/albums/nn65/blkdrgnphotos/Gun/F8376C8C-9A75-430B-B861-2C87D34E9C4F-5148-00000241CA332D01_zpsc3f7d20f.jpg)
(http://i301.photobucket.com/albums/nn65/blkdrgnphotos/Gun/7F1EACC8-8E92-49F0-A6A7-7BB1C19F07F4-5148-00000241C4B9C086_zps6f879692.jpg)
Problem is on the inside. The braces are in the way of the fasteners. Should I cut them down so the fasteners fit and seat properly? Will this weaken the chassis too much? I'm pretty sure I have to drill and cut down the middle brace and install two screws.
(http://i301.photobucket.com/albums/nn65/blkdrgnphotos/Gun/F7A161C2-F383-4859-8AAE-D9B151A7A16E-5148-00000241CFD480ED_zpsd1b80220.jpg)
(http://i301.photobucket.com/albums/nn65/blkdrgnphotos/F7A161C2-F383-4859-8AAE-D9B151A7A16E-5148-00000241CFD480ED_zps0e78e9ec.jpg)
-
.
-
Geez...with all this work, you should have just took it to Speedtek.
Who and where is Speedtek?
-
.
-
Oh I didn't know he works there. Hopefully I can go there this week.
-
Yah just use a Dremel to take down the area needed to fit the T-nut if your worried about the chassis rigidity then get a aluminum bedded stock but ass long as u can put some pressure on the bipod and not have stock touch your barrel u should be fine.
-
Thanks SpeedTek!
(http://i301.photobucket.com/albums/nn65/blkdrgnphotos/Gun/CA1F60CA-9FF7-44AE-9B32-FDAD555E815D-387-000000264123F336_zps9a5fa9a2.jpg)
(http://i301.photobucket.com/albums/nn65/blkdrgnphotos/Gun/6ADAEEE2-4D89-4B2E-B158-C396AF88FC23-387-0000002647EB5A55_zps7c822518.jpg)
-
NIce! THANKS for the Tip!
Total Bill $1.50
-
Next time you want to mount a bipod to a stud try using the S.R.A. (Swivel Rail Adapter) by Rota-Pod http://www.mountsplus.com/AR-15_Accessories/AR-15_Scope_Rings/143-MIM-SRA.html (http://www.mountsplus.com/AR-15_Accessories/AR-15_Scope_Rings/143-MIM-SRA.html)