2aHawaii

General Topics => General Discussion => Topic started by: passivekinetic on September 17, 2013, 03:33:13 PM

Title: How to remove B.A.D. Lever?
Post by: passivekinetic on September 17, 2013, 03:33:13 PM

Folks, after my 4-day Rifle at Front Sight, I have a new appreciation for streamline firearms.

So, how do I remove the fancy B.A.D. Lever that I had installed on my AR when I first got it?

I have the allen key that I got with the BAD but not really sure how to go about it.

Title: Re: How to remove B.A.D. Lever?
Post by: WTF?Shane on September 17, 2013, 03:53:42 PM

Break torque on the Torx screw. Remove screw. Lever should come off and you should see piece that goes behind bolt release. If you can't easily remove the back half piece, pull charging handle back and lock bolt to back, bolt release will move outward and you should be able to pull the piece off.

And I'm damn sure you should've been able to search it on Google and/or YouTube.

Title: Re: How to remove B.A.D. Lever?
Post by: passivekinetic on September 17, 2013, 04:39:12 PM

I tried searching but all I could find was how to INSTALL it.

Title: Re: How to remove B.A.D. Lever?
Post by: dirsh on September 17, 2013, 04:42:15 PM

1. remove rear takedown pin
2. break down rifle shotgun style
3. unscrew BAD lever
4. have a beer

Title: Re: How to remove B.A.D. Lever?
Post by: passivekinetic on September 17, 2013, 04:44:16 PM

So nothing to replace? Just remove the screw, and then remove the lever?

Title: Re: How to remove B.A.D. Lever?
Post by: sound wave on September 17, 2013, 04:49:36 PM

yes.  it just clamps on.

Title: Re: How to remove B.A.D. Lever?
Post by: passivekinetic on September 17, 2013, 04:50:42 PM

OK thanks guys.

I removed it.

Now to eBay it.  :shaka:

Mahalo!