2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: passivekinetic on September 26, 2013, 12:09:35 PM
-
So this 300 AAC BLACKOUT...
Do you take any AR lower, attach the 300 BLK upper, and use 300 BLK magazines, and you are good to go?
-
Yes. And if I'm not mistaken, .300 blackout uses standard AR mags. No special magazines required.
And actually, if I'm also not mistaken, all that really needs to be changed is the barrel. I think you can still use the same gas system, bolt etc... Can any of the blackout shooters confirm this for sure?
-
So what’s the final word? What’s my opinion on all this fancy .300 Blackout stuff? My personal opinion is that it’s frankly amazing. By simply changing out your barrel (and JUST the barrel) you get a completely different gun, one with more muzzle energy, able to just about sound like an MP5-SD, and 100% compatible with all of your existing gear. If you own an AR-15 (or even just a short action bolt gun) and you’ve been looking for something that’s easily suppressed, has great terminal ballistics, and is accurate as anything, this is what you want.
.300 AAC Blackout
Benefits
More muzzle energy than 5.56 NATO
Able to be suppressed more effectively than 5.56
Uses a larger bullet for more damage to target
Able to penetrate barriers more effectively
Armor piercing and incendiary bullets available (if not completely legally)
Supersonic and subsonic ammunition available
Swapping between supersonic and subsonic requires no changes to the gun
Can be made from 5.56 brass, easy to reload
Drawbacks
Ammunition is not widely available
Ammunition is currently slightly expensive
http://www.thetruthaboutguns.com/2011/07/foghorn/ammunition-review-300-aac-blackout/ (http://www.thetruthaboutguns.com/2011/07/foghorn/ammunition-review-300-aac-blackout/)
-
Yes you only need to replace your barrel but u better be reloading cus theres is usually no ammo on island
-
What happens if you "accidentally" fire a .223/5.56 round into the .300 BLK barreled AR?
I guess the .223 won't seat properly against the barrel throat? And as a result, the firing pin may or may not hit the primer?
-
What happens if you "accidentally" fire a .223/5.56 round into the .300 BLK barreled AR?
I guess the .223 won't seat properly against the barrel throat? And as a result, the firing pin may or may not hit the primer?
223 wont chamber in 300 blk. its too long. the reverse is possible and probably catastrophic.
-
223 wont chamber in 300 blk. its too long it catches on the shoulder. the reverse is possible and probably catastrophic.
-
Although not required for the rifle to cycle, you may want to replace the buffer with a heavier H or H-2 version to smooth out the recoil from the 300BLK ammo.
As for mixing up the ammo, either conspicuously mark the mags containing 5.56 and 300BLK, or don't have both caliber rifles and ammo on the same bench together.
Even if you are super cautious and never, ever make a mistake, someone shooting with you may not be so careful.
-
Even if you are super cautious and never, ever make a mistake, someone shooting with you may not be so careful.
Thanks; that is a very good reminder.
-
Firing a 300 BO round in a 223 upper is a very real danger. An experienced gun writer did make this mistake. His AR was turned into a paper weight. He was lucky to have only minor injuries from the experience. He had the barrel cut in half length wise. The 30 cal. bullet never exited the barrel, it was formed into a slug a couple of inches long . He wrote and article about it. It was titled: Have you ever seen a 150 grain 22 cal. bullet?
-
Firing a 300 BO round in a 223 upper is a very real danger. An experienced gun writer did make this mistake. His AR was turned into a paper weight. He was lucky to have only minor injuries from the experience. He had the barrel cut in half length wise. The 30 cal. bullet never exited the barrel, it was formed into a slug a couple of inches long . He wrote and article about it. It was titled: Have you ever seen a 150 grain 22 cal. bullet?
http://www.ar15.com/forums/t_3_121/575869_Can_you_shoot_300_BLK_out_of_a_223____Update__Itandapos_s_Out___Page_2.html (http://www.ar15.com/forums/t_3_121/575869_Can_you_shoot_300_BLK_out_of_a_223____Update__Itandapos_s_Out___Page_2.html)
-
Yes it's that easy. The lower, upper, bolt, magazine are the same for .223 and 300blk. The only difference in the entire rifle is the barrel. You can take your standard ar lower, slap a 300blk upper on it, and you're ready to go. Provided that you have the ammo. 300blk hasn't really caught on here yet, but it will. It's only a matter of time before more people start getting into it, and availability of ammo becomes better. But for now, if you plan on getting into 300blk, then you should look into reloading. There isn't much ammo for the 300blk available at the moment, it's been sold out for months. Need tips for reloading 300blk, YouTube is your friend.
-
If anyone is looking for 300 blackout ammo, Rural King has boxes of 20 count for $11.49. 147grain.
Hmmmmm, this post looks mightily suspicious. Could it be............ SPAM?
-
Apparently, they're based out of Illinois. Doh!