2aHawaii

Tools and Uses => Firearms and Accessories => Topic started by: aieahound on December 19, 2013, 02:10:41 PM

Title: FMJ round nose in Lever gun
Post by: aieahound on December 19, 2013, 02:10:41 PM
Does anyone know if it's safe to use FMJ round nose handgun caliber ( 357/38special ) ammo in a lever gun ?
Title: Re: FMJ round nose in Lever gun
Post by: OGC on December 19, 2013, 02:28:05 PM
Generally contraindicated.  SWC, any soft point (including round nose), flat tip, most hp all good to go but round nose jacketed is making direct contact with primer of round in front.

Likely issue?  no.  Just saying
Title: Re: FMJ round nose in Lever gun
Post by: aieahound on December 20, 2013, 10:26:51 AM
Thanks OGC !  :shaka:

Think I'm gonna go with TMJs ( Truncated flat nose )
Still metal jacketed but at least they have the flat nose.
Title: Re: FMJ round nose in Lever gun
Post by: Bigkahuna808 on December 20, 2013, 11:25:44 AM
Dunno if it's all the same but for 30/30 I've always bern told flat nose only, avoid round or pointed
Title: Re: FMJ round nose in Lever gun
Post by: Tom_G on December 20, 2013, 12:18:55 PM
The odds are long. The .357 in a carbine has mild recoil, the noses of the bullets are a gentle round, and copper jackets are soft. Still, long odds are long odds.  I sure would feel uncomfortable doing this.
Title: Re: FMJ round nose in Lever gun
Post by: aieahound on December 20, 2013, 12:39:36 PM
You think a TMJ is OK ? ( Truncated flat-nosed but Metal Jacketed )

I think I've decided against the round nosed FMJs based on input.  :shaka:
Title: Re: FMJ round nose in Lever gun
Post by: Tom_G on December 20, 2013, 04:43:10 PM
You think a TMJ is OK ? ( Truncated flat-nosed but Metal Jacketed )

No worries.  Flat is good.  Doesn't matter so much if it's flat lead, flat copper, flat plastic, whatever.
Title: Re: FMJ round nose in Lever gun
Post by: aieahound on December 20, 2013, 06:52:05 PM
Thanks Tom G !  :shaka:

That's the route I'm going.
Title: Re: FMJ round nose in Lever gun
Post by: GZire on December 29, 2013, 07:45:36 AM
The odds are long. The .357 in a carbine has mild recoil, the noses of the bullets are a gentle round, and copper jackets are soft. Still, long odds are long odds.  I sure would feel uncomfortable doing this.


I read an article a long time ago about loading modern bullets into tube magazines.  The article was geared towards a soft tip polymer bullet and it being able to be used without issue of the primer of the round in front.  Sorry but I don't remember the bullet in question. 

..........so this being said I'd simply do a FAQ to the manufacturers to see what they say about round nose bullets in the tube magazines.