2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: macsak on January 19, 2014, 03:48:14 PM
-
so i got a PASGT helmet at the last swap meet
i ordered the upgrade kit for the pads and chinstraps from amazon
watching the NFC championship and taking apart the old helmet, and i find that the clips that hold the suspension for the helmet are rusting
i can get them off of the helmet if i cut them, but there aren't any new ones in the kit
is there someplace local i can get them?
i searched google and can't find them on the internet either
is there a jury-rigged solution?
-
.
-
ebay
mahalo q
tried it
only see automotive ones
-
Attached a pic of my ACH, with the comfort kit I got while on my most recent deployment. I kinda thought the PASGT got the same treatment with most upgrade kits... Old school suspension completely removed, replaced by Velcro & thicker pads like these. Do you have a pic of the kit you're getting? Also, what size is the shell? I may have an upgraded GENTEX chin strap you can have (if I can find it). It's for a medium shell I believe...
Boomah :shaka:
-
Oh, and are you talking about the clips that secure the leather sweat band to the existing suspension? If so then that's easy... I have those from my old PASGT :thumbsup:
Post a pic of what you need if you can...
Boomah :shaka:
-
Attached a pic of my ACH, with the comfort kit I got while on my most recent deployment. I kinda thought the PASGT got the same treatment with most upgrade kits... Old school suspension completely removed, replaced by Velcro & thicker pads like these. Do you have a pic of the kit you're getting? Also, what size is the shell? I may have an upgraded GENTEX chin strap you can have (if I can find it). It's for a medium shell I believe...
Boomah :shaka:
i got the complete upgrade kit with suspension and chinstrap
it basically makes the PASGT into an ACH type
i have all the pieces, except i need to reuse the clips
and i can't get them off because they are rusted
mahalo for the offer, boom
-
Oh, and are you talking about the clips that secure the leather sweat band to the existing suspension? If so then that's easy... I have those from my old PASGT :thumbsup:
Post a pic of what you need if you can...
Boomah :shaka:
yes, i need the six screws and clips that secure the headband
i have to switch from my computer to my phone
-
Copy, think I understand what you need now. Is this what you're looking for?
http://www.ebay.com/itm/KEVLAR-HELMET-SUSPENSION-A-NUT-A-SCREW-6-EA-PASGT-US-ARMY-USMC-SWAT-OPS-FAST-P38-/380612604722?pt=LH_DefaultDomain_0&hash=item589e477332 (http://www.ebay.com/itm/KEVLAR-HELMET-SUSPENSION-A-NUT-A-SCREW-6-EA-PASGT-US-ARMY-USMC-SWAT-OPS-FAST-P38-/380612604722?pt=LH_DefaultDomain_0&hash=item589e477332)
Boomah :shaka:
-
Damnit
How did you find those on eBay?
I suck
Yes, that is what I need
Exactly what I need
What do you want for 'em?
-
LOL, no problem macsak... Was just a lucky guess, eBay can be a pain to search ;)
I sadly don't have any of those, all I've got are the spring clips to secure the sweat band to the old school web suspension. But the link I included should be good to go, think the seller has more than a few sets available :thumbsup:
Boomah :shaka:
-
.
-
Mac...didn't I tell you to order the OPSCORE chin strap? The clips come with the kit.
yes, you did, but the bolts are extra, and are only for the strap
http://www.optactical.com/opch.html (http://www.optactical.com/opch.html)
and that chin strap was way too much $$$
i needed to spend the money on the pads
not like i'm going to be wearing it on duty, just building it for cheap fun
:D
-
.
-
The chinstrap comes as a set. It would be pointless to sell a chinstrap without the hardware to mount it.
And this would have been probably the best upgrade you could have done for this helmet. You'll find out soon enough... >:D
oops
Mounting hardware included.
but these are not the clips i need
http://www.optactical.com/opbamoha4pc.html (http://www.optactical.com/opbamoha4pc.html)
i need these
http://www.ebay.com/itm/KEVLAR-HELMET-SUSPENSION-A-NUT-A-SCREW-6-EA-PASGT-US-ARMY-USMC-SWAT-OPS-FAST-P38-/380612604722?pt=LH_DefaultDomain_0&hash=item589e477332 (http://www.ebay.com/itm/KEVLAR-HELMET-SUSPENSION-A-NUT-A-SCREW-6-EA-PASGT-US-ARMY-USMC-SWAT-OPS-FAST-P38-/380612604722?pt=LH_DefaultDomain_0&hash=item589e477332)
-
I Googled "nut clips" ...
You're one sick dude!! :wacko:
-
I might have those in one of my footlockers. If i find them they're yours.
-
I might have those in one of my footlockers. If i find them they're yours.
mahalo boz
-
I might have those in one of my footlockers. If i find them they're yours.
bozo found 5
anyone have an extra nut clip?
:geekdanc:
-
Gonna check tomorrow, I may have an extra one...
Boomah :shaka:
-
Gonna check tomorrow, I may have an extra one...
Boomah :shaka:
mahalo, boom
i just don't want to put it on craigslist that i am seeking a nut clip
-
Howzit, still looking for one... Keep your fingers crossed! :shaka:
Boomah
-
Howzit, still looking for one... Keep your fingers crossed! :shaka:
Boomah
thanks, boom
everything on my body is crossed
-
Got'm! Found two actually, both with fastener & triangle nut.
Please PM me to coord a pick-up point :thumbsup:
Boomah :shaka:
-
Got'm! Found two actually, both with fastener & triangle nut.
Please PM me to coord a pick-up point :thumbsup:
Boomah :shaka:
pm sent soon
:worship:
-
pm sent soon
:worship:
removed 2 rusty nut clips tonight
getting 2 replacements tomorrow
4 more to remove
gonna have to drill 'em out
i wonder where i can find drills to do that?
::)
-
removed 2 rusty nut clips tonight
getting 2 replacements tomorrow
4 more to remove
gonna have to drill 'em out
i wonder where i can find drills to do that?
::)
UPDATE
all clips now removed
met boomah and he gave me 2 nut clips
mahalo boomah!
-
You and your ballistic nuts !
Along with your 18 inches of steel, she won't say much ! :crazy:
-
UPDATE
all clips now removed
met boomah and he gave me 2 nut clips
mahalo boomah!
No problem macask, anytime :shaka:
Boomah
-
You and your ballistic nuts !
Along with your 18 inches of steel, she won't say much ! :crazy:
2 nuts are in!
strap is in postition
just waiting for bozo to give me his nuts
:crazy:
-
2 nuts are in!
strap is in postition
just waiting for bozo to give me his nuts
:crazy:
multicam cover shipped!
nut clip pickup this afternoon
i love it when a plan comes together
-
multicam cover shipped!
nut clip pickup this afternoon
i love it when a plan comes together
mahalo bozo!
nut clips installed
gotta wait for cover to tighten screws and install pads
-
too bad i didnt see this earlier.
i have a medium ach helmet thats ready to go, but too small for me even with thinner pads.
i was looking up helmets to see what the going price is locally and came across this thread.
did you finish it up? :needpics: ;D