2aHawaii
General Topics => General Discussion => Topic started by: dogman on February 13, 2014, 08:14:06 PM
-
Registered today. :D No problem. Very uneventful. In and out in ten minutes They knew this was coming for a couple of weeks as I've been in there with bits and pieces. They just used white out on my original lower receiver registration and typed in 5.56 semi auto pistol. In case anyone is wondering, Aero Precision upper and lower receivers, Phase Five pistol buffer tube assembly, 7" barrel from Midway (cheap one), DPMS gas tube, Midwest low pro gas block, YHM carbine length handguard, and pretty much whatever I could get my hands on to get this thing built. I wanted to have this registered as a completed firearm in case I had any problems at the range. The HPD guys were really cool and said "if they give you any trouble at the range, have them call us and we'll tell them it's all good". :shaka: Hope to see how it fires this weekend.
-
Registered today. :D No problem. Very uneventful. In and out in ten minutes They knew this was coming for a couple of weeks as I've been in there with bits and pieces. They just used white out on my original lower receiver registration and typed in 5.56 semi auto pistol. In case anyone is wondering, Aero Precision upper and lower receivers, Phase Five pistol buffer tube assembly, 7" barrel from Midway (cheap one), DPMS gas tube, Midwest low pro gas block, YHM carbine length handguard, and pretty much whatever I could get my hands on to get this thing built. I wanted to have this registered as a completed firearm in case I had any problems at the range. The HPD guys were really cool and said "if they give you any trouble at the range, have them call us and we'll tell them it's all good". :shaka: Hope to see how it fires this weekend.
nice job, dman
-
Wow! That looks pretty amazing! I'm glad you did the leg work for others to follow. :thumbsup:
-
I want one....... Not practical, but I want one.
-
.
-
May have to spin up some people and do this as well.
-
LOL. Very slick getting around that loophole.
-
Nice work, bruddah dogma... how do you load it?
Thanks,
Pivot open the upper to load
-
Welcome to the AR pistol club :shaka: Here's mine that I registered around 9 years ago
Thanks for doing all the leg work, all this time I thought we couldn't bring pistol frames into the state without welding the mags on first..
(http://img.photobucket.com/albums/v518/no_scade/72595014-1BD9-4695-8E55-ACA54F800F90.jpg) (http://s.photobucket.com/user/no_scade/media/72595014-1BD9-4695-8E55-ACA54F800F90.jpg.html)
(http://img.photobucket.com/albums/v518/no_scade/227CC921-F7B1-44CB-834E-8835745A83AA.jpg) (http://s.photobucket.com/user/no_scade/media/227CC921-F7B1-44CB-834E-8835745A83AA.jpg.html)
-
I'll be the next one into the club. Started my two week waiting period this week. Should have all my upper components a day or two after the lower is registered. Looks awesome bro!
-
Right on!
:thumbsup:
Told ya so, welcome to the AR pistol club.
You'll have no troubles at the range. I bring mine their once in a blue moon. The Filipino RO are ok with it just don't rapid fire.
-
Hey suka, it was your posts on earlier AR pistol threads that got me motivated :shaka: and thanks sliver for starting the "are people turning their ar15's in to pistols" thread earlier this year.
-
It's a mini ghost gun! You can call it: Casper.
-
Welcome to the AR pistol club :shaka: Here's mine that I registered around 9 years ago
Thanks for doing all the leg work, all this time I thought we couldn't bring pistol frames into the state without welding the mags on first..
(http://img.photobucket.com/albums/v518/no_scade/72595014-1BD9-4695-8E55-ACA54F800F90.jpg) (http://s.photobucket.com/user/no_scade/media/72595014-1BD9-4695-8E55-ACA54F800F90.jpg.html)
(http://img.photobucket.com/albums/v518/no_scade/227CC921-F7B1-44CB-834E-8835745A83AA.jpg) (http://s.photobucket.com/user/no_scade/media/227CC921-F7B1-44CB-834E-8835745A83AA.jpg.html)
NoScade, please educate me... Where is the buffer tube on that?
-
.
-
NICE WORK! Love it!
-
I'm guessing it is a piston system, so there is no need for a buffer tube.
Ah thank you, new guy.
-
What's the oal?
-
Very cool. So that's a handgun?
How many shots you think you'll be able to fire on the silhouette side before they stop you?
I think that would be a lot of fun!!!
-
Very cool. So that's a handgun?
How many shots you think you'll be able to fire on the silhouette side before they stop you?
I think that would be a lot of fun!!!
Seems no different from the XP100's shooting rifle cartridges.
-
What's the oal?
22.75"
-
NoScade, please educate me... Where is the buffer tube on that?
It's still a DI gun but the spring is above the barrel which is connected to the bolt carrier eliminating the buffer tube assembly
-
22.75"
Put a red dot on it and you can shoot it on the rifle side
-
Put a red dot on it and you can shoot it on the rifle side
Just dont get caught shouldering the buffer tube assembly. :thumbsup:
-
Would a california "bullet button" also qualify as Non removeable fixed mag?
-
Would a california "bullet button" also qualify as Non removeable fixed mag?
Maybe. The only reason it works for California is because of some "admissions" by the Attorney General saying it qualified in a legal battle in CA.
-
Just dont get caught shouldering the buffer tube assembly. :thumbsup:
Nah it's perfectly fine to do it but I would like to see everyone trip thinking its a SBR..lol
-
Welcome to the AR pistol club :shaka: Here's mine that I registered around 9 years ago
Thanks for doing all the leg work, all this time I thought we couldn't bring pistol frames into the state without welding the mags on first..
(http://img.photobucket.com/albums/v518/no_scade/72595014-1BD9-4695-8E55-ACA54F800F90.jpg) (http://s.photobucket.com/user/no_scade/media/72595014-1BD9-4695-8E55-ACA54F800F90.jpg.html)
Hey - that AR pistol looks very familiar ;)
(http://i996.photobucket.com/albums/af82/jonlagon72/9b2e2791-330e-48c9-8826-c049d04b4da1_zpsa84205f9.jpg) (http://s996.photobucket.com/user/jonlagon72/media/9b2e2791-330e-48c9-8826-c049d04b4da1_zpsa84205f9.jpg.html)
-
Would a california "bullet button" also qualify as Non removeable fixed mag?
Was thinking the same thing. Then it would be possible to bring this in.
http://newfrontierarmory.com/catalog/index.php?main_page=product_info&cPath=388&products_id=58527 (http://newfrontierarmory.com/catalog/index.php?main_page=product_info&cPath=388&products_id=58527)
-
I don't think the bullet button is a viable option for us in Hawaii. I believe ours has to be permanently attached.
-
Hey - that AR pistol looks very familiar ;)
(http://i996.photobucket.com/albums/af82/jonlagon72/9b2e2791-330e-48c9-8826-c049d04b4da1_zpsa84205f9.jpg) (http://s996.photobucket.com/user/jonlagon72/media/9b2e2791-330e-48c9-8826-c049d04b4da1_zpsa84205f9.jpg.html)
holy schnikes
i think davemojo showed me her picture on thursday
-
I don't think the bullet button is a viable option for us in Hawaii. I believe ours has to be permanently attached.
guess which bench was attracting the most attention at the rifle range today?
hint: it was NOT the guy with the barrett
8)
mahalo dogman, for letting me and my friends check it out
he's got an even better, simpler idea to just block the mag release too
-
guess which bench was attracting the most attention at the rifle range today?
hint: it was NOT the guy with the barrett
8)
mahalo dogman, for letting me and my friends check it out
he's got an even better, simpler idea to just block the mag release too
Yes he does, and in less than two weeks he'll be doing it to my pistol lower!
-
Awesome pistols dogman and NoScade!
It would be cool if someone could invent some kinda spring loaded stripper
clip that you could "QUICKLY" reload the welded mag with from the bottom...
Does the law say the mag has to be enclosed all the way around accept the top?
I know it needs some type of spring load to push the ammo up, but there's
gotta be a way.......hhhhhhmmmmmmm ::)
-
Banana
There is a way.
Start a new post and I'll try to explain and let others learn about it. Let's keep this post free of other topics.
-
Hey - that AR pistol looks very familiar ;)
(http://i996.photobucket.com/albums/af82/jonlagon72/9b2e2791-330e-48c9-8826-c049d04b4da1_zpsa84205f9.jpg) (http://s996.photobucket.com/user/jonlagon72/media/9b2e2791-330e-48c9-8826-c049d04b4da1_zpsa84205f9.jpg.html)
Hahahaha yup that was a fun shoot, that Shelby girl was really hot :love:
-
How did you go about welding the mag to the lower? Was it costly and a PITA? If you left HI and went to a state where AR pistols are accepted, how difficult to unweld the mag and how ugly will it be after? Thanks man!
Registered today. :D No problem. Very uneventful. In and out in ten minutes They knew this was coming for a couple of weeks as I've been in there with bits and pieces. They just used white out on my original lower receiver registration and typed in 5.56 semi auto pistol. In case anyone is wondering, Aero Precision upper and lower receivers, Phase Five pistol buffer tube assembly, 7" barrel from Midway (cheap one), DPMS gas tube, Midwest low pro gas block, YHM carbine length handguard, and pretty much whatever I could get my hands on to get this thing built. I wanted to have this registered as a completed firearm in case I had any problems at the range. The HPD guys were really cool and said "if they give you any trouble at the range, have them call us and we'll tell them it's all good". :shaka: Hope to see how it fires this weekend.
-
This is the reason for debate about 30 rnd AR magazines. Just saying.
-
Did I mention a magazine capacity?
This is the reason for debate about 30 rnd AR magazines. Just saying.
-
How did you go about welding the mag to the lower? Was it costly and a PITA? If you left HI and went to a state where AR pistols are accepted, how difficult to unweld the mag and how ugly will it be after? Thanks man!
I have heard that currently HPD will only accept a securely welded magazine to the lower receiver and you must perform the welding yourself. If I moved to a state where AR pistols are legal, i'd spend a hundred bucks and buy a new stripped lower.
-
How did you go about welding the mag to the lower? Was it costly and a PITA? If you left HI and went to a state where AR pistols are accepted, how difficult to unweld the mag and how ugly will it be after? Thanks man!
https://2ahawaii.com/index.php?topic=13347.0
-
take out the gas tube and allow the pistol to operate via bolt action. that way the lower need not be molestered. but then you'd be restricted to10 rd mags and can't load up 30rds .
-
HPD will not let you register a lower as a pistol without the welded magazine the last time I checked. The rules have gotten a lot stricter since my original post. :(
-
How the fuck is HPD making up their own laws?
non semi auto
C&Rs
16" barrels
non detachable magazines
are all non assault pistols! :wtf:
-
so if I walk in with a AR semiautomatic which accepts a detachable magazine pistol and the barrel was 16" long they won't allow me to register it?
what do I do with it?
-
So welded mag, short barrel, and pistol buffer tube. Just curious, how do you guys get past the weight and length issue? So no muzzle device?
-
So welded mag, short barrel, and pistol buffer tube. Just curious, how do you guys get past the weight and length issue? So no muzzle device?
As my understanding if your pistol can not accept a detachable magazine then by definition it is not considered an "Assault pistol" and there for the other characteristics neednot apply.
§134-1 Definitions. As used in this chapter, unless the context indicates otherwise:
"Assault pistol" means a semiautomatic pistol which accepts a detachable magazine and which has two or more of the following characteristics:
(1) An ammunition magazine which attaches to the pistol outside of the pistol grip;
(2) A threaded barrel capable of accepting a barrel extender, flash suppressor, forward hand grip, or silencer;
(3) A shroud which is attached to or partially or completely encircles the barrel and which permits the shooter to hold the firearm with the second hand without being burned;
(4) A manufactured weight of fifty ounces or more when the pistol is unloaded;
(5) A centerfire pistol with an overall length of twelve inches or more; or
(6) It is a semiautomatic version of an automatic firearm;
but does not include a firearm with a barrel sixteen or more inches in length, an antique pistol as defined in this section or a curio or relic as those terms are used in 18 United States Code §921(16) or 27 Code of Federal Regulations 178.11
-
I never had an AR pistol in my hands. So how long and how heavy are these conventional AR pistols? I quickly checked the specs on RRA AR pistol with the 7 inch barrel just for a generic comparison with what is commercially available and what one could typically build. It was 5 pounds and 23 inches long. I would think welding just the mag to the lower would add a few more ounces, let alone plates to box it up. At 80 ozs and 23 inches long that is a bit heavier and longer what is written in the definition of an assault pistol. Or are there special lightweight parts one should also purchase along with the shorter pistol buffer tube?
I am guessing the muzzle device needs to be pinned and welded, right? Are the hand guards legal to install?
When I first read this thread last year or so, I wanted to build one. I purchased a blem lower and started to plan out my blueprint. I found I still would run into the weight and length roadblock. As of a few months ago, I ditched that plan and just built another AR rifle.
-
"Assault pistol" means a semiautomatic pistol which accepts a detachable magazine and which has two or more of the following characteristics:
By permanently attaching the mag you no longer have a assault pistol any other characteristic don't apply because you now have a semiautomatic break action pistol.
-
I am guessing the muzzle device needs to be pinned and welded, right? Are the hand guards legal to install?
Wrong and yes. The photo of the pistol at the beginning of this thread was inspected by HPD and registered as a "semi-auto 5.56 pistol".
When I first read this thread last year or so, I wanted to build one. I purchased a blem lower and started to plan out my blueprint. I found I still would run into the weight and length roadblock. As of a few months ago, I ditched that plan and just built another AR rifle.
If you comply with HPD's welded magazine requirement, I don't believe there are any restrictions on weight or length.
-
All six sub catagories do NOT apply if it has any one of the following characteristic :
a non detachable magazine
is a not a semi automatic
is a C&R
has a barrel at least 16"
again any of the above will void all the 6 sub catagories. (weight, treaded barrel, shroud, etc.....)
-
Okay, thanks.
-
So could you do a non-semi ar pistol then change your mind later , weld the mag and install a gas tube?
-
So could you do a non-semi ar pistol then change your mind later , weld the mag and install a gas tube?
yeap!
-
So could you do a non-semi ar pistol then change your mind later , weld the mag and install a gas tube?
Based on my discussions with HPD, It's doubtful they will allow it.
-
:wacko:
it's written in black and white, how can it not be allowed?
HPD got some explaining to do.
-
HPD will not let you register a lower as a pistol without the welded magazine the last time I checked. The rules have gotten a lot stricter since my original post. :(
When I did mine I first brought it in as a stripped lower for a pistol and they registered it. That was in June. It's just a part and not anything yet. Then after the build I had to take it back to re reg.