2aHawaii
General Topics => General Discussion => Topic started by: kekoa on April 24, 2014, 05:17:45 PM
-
What do you guys think of AR15 trigger adjusters? You know the cheap, low budget version; screw with an internal threaded screw. From what I gather it gets rid of the excess creep of the trigger and maybe even a half pound or slightly more in the pull. I found them for 15$ on AR15TriggerAdjusters.com and on ebay for even less.
-
I use them all the time.
X-Ring has the SS version and free installation. There are a few tricks to setting them up properly. Also your lower must be drilled all the way thru from the grip screw.
Most lowers are drilled all the way but there are some that are not.
-
I use them all the time.
X-Ring has the SS version and free installation. There are a few tricks to setting them up properly. Also your lower must be drilled all the way thru from the grip screw.
Most lowers are drilled all the way but there are some that are not.
How much would that be Dex? Can I bring my lower only? I will be up in third weekend in May is it a quick job? Our time will be tight too, remember I live Kauai yeah…
Maybe we try to coordinate something as it gets closer, let me know. Hope your doing well.
I finally put a few down range with the S2K, very nice! :thumbsup:
-
I used this http://www.junkyardgenius.com/firearms/ar-15/ar08.html (http://www.junkyardgenius.com/firearms/ar-15/ar08.html) with great results. Only thing is i used a 3/8x28" set screw. The suggested size did not work. Might be tricky to find at a hardware store. I ordered mine online. My lpks were a cmmg & doublestar. Excellent results with the cmmg kit. Just take your time doing the mod. Depends how familiar you are with ars You can be done in less than 20 mins. For cheap. Seems complicated but its not.
-
Yes it's fast. Less than 5 min.