2aHawaii

General Topics => General Discussion => Topic started by: senojeelnodnarb on May 18, 2014, 09:51:55 PM

Title: 80% lower receivers
Post by: senojeelnodnarb on May 18, 2014, 09:51:55 PM
I'm wondering who else has milled out an 80% lower for their AR. A guy at young guns sent me to this site.
Title: Re: 80% lower receivers
Post by: suka on May 18, 2014, 10:21:24 PM
   :wave:

Many Many

 :D :D
Title: Re: 80% lower receivers
Post by: suka on May 18, 2014, 10:24:24 PM
BATF does not require registration or serial numbers according to the GCA.

but Hawaii HRS does require registration and S/N
Since you are the manufacture, you'd need to engrave the following info
Min. 1/16 tall and .003 deep (BATF 27 CFR 478.92)


Name (you)
City , State
S/N
Cal.

KEALOHA
HON HI
12345
5.56
Title: Re: 80% lower receivers
Post by: senojeelnodnarb on May 19, 2014, 03:07:39 PM
Yeah i know what it needs just seeing if 80% is popular here
Title: Re: 80% lower receivers
Post by: OldFaithful on May 19, 2014, 07:20:30 PM
It seems the popularity of the 80% receiver is due there being no paper trail, since there is no atf form filled out since its not a finished receiver.  In Hawaii you have to register it anyway so why not just buy a 100% lower.
Title: Re: 80% lower receivers
Post by: suka on May 19, 2014, 08:16:34 PM
putting your marks and own serial numbers
Nationalist Chinese version m4

(http://image.wangchao.net.cn/junshi/1268678762358.jpg)
Title: Re: 80% lower receivers
Post by: dogman on May 19, 2014, 08:34:46 PM
It seems the popularity of the 80% receiver is due there being no paper trail, since there is no atf form filled out since its not a finished receiver.  In Hawaii you have to register it anyway so why not just buy a 100% lower.
+1
Stripped lower can cost less than an 80%, no real advantage machining one in Hawaii. :(  That doesn't mean I wouldn't do one just for the fun of it. ;)