2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: new guy on June 25, 2014, 10:53:45 AM
-
.
-
theyre around like 54 bucks shipped on botach
-
.
-
Can you find some data on what size the ports are?
I think they are too small to be effective. It will work.
I like to make my brakes with large primary ports.
-
I got 2 incoming in a day or two. Will try to get out and shoot it asap.
-
First impressions: Looks to be the same size ports as a regular MB556. The MB556 works fine so this should as well. I can see where they cut back on costs, comes in a cardboard box, crush washer, and simple instructions. Looks like they're planning to release a flash hider along with this. 3P Eliminator Flash Hider. The finish is a little rough with tool marks, and really shallow name engraving for PROCOMP and Surefire. It is a pure basic form of the MB556, which is what I expected to get for $52 street for these.
In comparison to other brakes it is relatively the same size as the MB556's. I threw in a Battlecomp BABC to show size relation compared to a Battlecomp 1.0. Left to right - Spikes Dynacomp, Fortis RED, Rainier Arms XTC, Battlecomp 1.0, Surefire MB556K, Surefire Procomp, and Battlecomp BABC. I'll be taking it out for some shooting and comparing to a regular MB556, and a Battlecomp 2.0.
(http://i1305.photobucket.com/albums/s557/bran8o8/adsad/DSC01951_zps28337579.jpg) (http://s1305.photobucket.com/user/bran8o8/media/adsad/DSC01951_zps28337579.jpg.html) (http://i1305.photobucket.com/albums/s557/bran8o8/adsad/DSC01954_zps8ba95ee2.jpg) (http://s1305.photobucket.com/user/bran8o8/media/adsad/DSC01954_zps8ba95ee2.jpg.html)
(http://i1305.photobucket.com/albums/s557/bran8o8/adsad/DSC01957_zps588bcecd.jpg) (http://s1305.photobucket.com/user/bran8o8/media/adsad/DSC01957_zps588bcecd.jpg.html) (http://i1305.photobucket.com/albums/s557/bran8o8/adsad/DSC01956_zpsdbc113e9.jpg) (http://s1305.photobucket.com/user/bran8o8/media/adsad/DSC01956_zpsdbc113e9.jpg.html) (http://i1305.photobucket.com/albums/s557/bran8o8/adsad/DSC01955_zps0025099e.jpg) (http://s1305.photobucket.com/user/bran8o8/media/adsad/DSC01955_zps0025099e.jpg.html)
-
Does it come pre-drilled for the pin and weld? Also, what size wrench and what portion of the brake would you use to tighten it?
-
3/4" wrench. The brake is designed with wrench flats near right before the ports, near the top circle vents. They're not pre-drilled for pinning, probably to save some costs on their end. It's a pretty long brake so I assume they can be used for a 14.5 barrel. The material used isn't the toughest...I left some marring on the finish when I installed it. It was unavoidable, it wasn't due to my mistake, the metal is just a little soft.
-
Mahalos for the info. I guess I will stick with the original MB556K's I have sitting on the shelf.
-
Ran it a couple of days ago, shoots almost identical to the MB556 (as expected). For the price, it is definitely hard to beat. Right now I have a mix of SFs, and battlecomps and I'll probably stick to them. I still prefer the look of the MB556s but I think that the procomp it is a good option. The price is better than most brakes out there and functions as good as or better than a vast majority of devices out there.
-
What about the Lantac Dragon? This guy is firing on full auto and the muzzle barely moves:
http://youtu.be/8R1e46hCols (http://youtu.be/8R1e46hCols)