2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: passivekinetic on July 18, 2014, 03:03:48 PM
-
Small patches of rust on pistol magazines, how best to clean and condition?
-
You can try using this http://www.frontiermetalcleaner.com and some oil. If necessary maybe some Naval Jelly then you would have to re-blue the affected areas. For oil I used Kroil on my M-N 91/30 to remove some rust.
SEC carries the Frontier Metal Cleaner
-
take the mag apart and throw it in white vinegar. make take a day or 2
-
Gun oil and the finest steel wool you can find.
-
Electrolysis (https://www.youtube.com/watch?v=54ADeB6V1rQ)
-
OK guys, will try one or more of the above.
But, how to reblue?
Just get any "bluing kit"?
-
First you need to dissolve the rust and see how pitted the mags are if not...
1st: Vinegar Bath
2nd: Rinse and then I wash them with Hot Water and dish washing soap like Lemon Joy.
3rd: Dry them with a hair dryer
4th: See how bad the pitting is.
5th: if they need to be touched up I use the Birchwood Casey Super Blue and use a Cotton Swap to rub in the BCSB
I have gotten good results when the METAL IS CLEAN. It will turn a dark blue.
6th: Rinse with water and dry. I normally use a blow dryer
I use WD40 or some type of spray that will get any hidden water out. Then Oil it.
If you have time to spare throw the metal parts in 30W Pennzoil (Regular) for a month or 2.
You will get a rich deep blue on the metal.
-
ok thanks; i don't think it is too pitted. I was able to scrub off quite a lot (but not all) using just paper towels.
Now I am worried about those firearms which I did not touch for over one year.
-
Hey yo peeps, I took apart my Beretta 92 mags and did the surface scrubbing a bit.
Worked ok on small patches but some still remained. So, now I dumped one of them in a vinegar bath.
Damn, the vinegar seems to be eating away at the factory bluing within minutes of the vinegar bath. It is still soaking now.
But heck, the bluing didn't do much to protect the magazine otherwise I wouldn't have the rust. But it will look mighty weird though.
Is this your experience also for vinegar? I only did one mag to test (and I guess lucky I did) and not sure if I want to do the other mag if this is not good for it.
-
When you wash it with soap and water dry it good and oil it.
bluing should come back.
What color were they to begin with?
Blued or lightly blued or parkerized?
-
Try take the mags apart and throw them in your brass tumbler. should clean them up real nice.
-
When you wash it with soap and water dry it good and oil it.
bluing should come back.
What color were they to begin with?
Blued or lightly blued or parkerized?
parkerized, from what I read on the Nets regarding Beretta mags.
I washed with detergent and then had coated with WD-40, wiped off excess, and reassembled.
This was a few days ago, and I am not sure but MAYBE the bluing is coming back on? It "seems" a little darker maybe?
-
Try take the mags apart and throw them in your brass tumbler. should clean them up real nice.
thanks but no can do, not reloading (yet?) so no tumbler. Anyway, I guess I had to experiment with that mag. I am sure it will shoot OK but looks kinda bad right now. Some kind of funky non-camo camo pattern, haha. You know what, it looks like the apocalyptic Terminator stuff. Maybe can be a new trend ya?
-
When you use Vinegar and Parkerizing it will turn it white. It stripped all the oil out of the parkerizing.
You need to soak the mag in 30 or 40 Weight Oil Use only Pennsylvania Oil like Quaker State or Pennzoil.
leave it in there for a week.
Where the rust was might have a different color.
I can try to re-parkerize it if you want.
-
When you use Vinegar and Parkerizing it will turn it white. It stripped all the oil out of the parkerizing.
You need to soak the mag in 30 or 40 Weight Oil Use only Pennsylvania Oil like Quaker State or Pennzoil.
leave it in there for a week.
Where the rust was might have a different color.
I can try to re-parkerize it if you want.
Thanks bro; I will just live with it.
With the WD40 it SEEMS to be changing color slowly. Let's see what happens in a month.
-
Wd40 doesn't have the carbon content penn crude oil has
-
Wd40 doesn't have the carbon content penn crude oil has
OK will explore. Mahalo!