2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: dogman on September 17, 2014, 06:41:40 PM
-
I see Pietta black powder revolvers for around 150 bucks at Cabela's with free shipping. I'm thinking of getting one out of curiosity. It might end up being just a desk ornament. Do these need to be registered?
-
No but you can if you want to.
-
Thanks :shaka:
-
I love mine. I shoot it all the time. It is accurate to 25 yards. I would recommend the 1858 Army version as it has a top strap which makes the frame stronger. And if you are so inclined there are after market cylinders you can buy to convert it to 45 Long Colt Black Powder Only. Assuming you want to reload for the 45LC cartridge. I enjoy shooting it both ways with balls and with cartridges. How many guns do you own that you can say you shoot balls out of?
-
How many guns do you own that you can say you shoot balls out of?
Maybe one... soon. Much mahalos for the recommendation and info :shaka:
-
I love mine. I shoot it all the time. It is accurate to 25 yards. I would recommend the 1858 Army version as it has a top strap which makes the frame stronger. And if you are so inclined there are after market cylinders you can buy to convert it to 45 Long Colt Black Powder Only. Assuming you want to reload for the 45LC cartridge. I enjoy shooting it both ways with balls and with cartridges. How many guns do you own that you can say you shoot balls out of?
1858 Remington correct? Not sure that Colt went with a top until the Peacemaker.
-
I shoot Remmys too, and love them. My 25 yd groups are sometimes better than my .40 hand loads! Pick up some Ballistol and cleaning will be much easier. Also, make sure you use soft lead and not the wheel weight mixes if you cast your own.
-
Thanks guys :shaka: So I took Inspector's advice and ordered the 1858 Army version. I'm getting the 8" barrel since in was "in stock" and should have it in about a week. I guess now I have some learning to do. :shake:
-
I shoot almost every Sunday. Let me know if you want to bring your new pistol by the range and I'll bring my black powder. I'll be happy to show you what you need to know.
-
Thanks Inspector :shaka: When I'm ready I'll take you up on that offer. :thumbsup:
-
I shoot Remmys too, and love them. My 25 yd groups are sometimes better than my .40 hand loads! Pick up some Ballistol and cleaning will be much easier. Also, make sure you use soft lead and not the wheel weight mixes if you cast your own.
I get surprisingly good groups as well. And with the cylinder with 45 Colt cartridges loaded with black powder I see even better groups. I find Ballistol does a good job with black powder. Like you I spray my guns down before I drive home and cleaning is a lot easier as well.
-
So I got the Pietta 1858 Army version .44 cal. I'm looking to order some Hornady swaged pistol balls. There's 138 grain .451 diameter and 141 grain .454 diameter. Is either one okay or do you recommend something else? I've only been looking at Cabela's since I've had great service when dealing with them.
-
The .451 diameter balls are the correct ones if you also order the 0.010 patches. If you decide to use a smaller ball you need to use thicker or double patches.
-
Thanks Inspector :thumbsup:
-
You might consider buying pre-lubed patches or buy non-lubed and use your own lube. A lot of us use Crisco for lube. Some don't use any kind of patch or no lube. If you load like that expect accuracy to suffer and only load every other chamber. The lube helps adjacent chambers from igniting. That could be bad...
-
I have a blued Remington black powder revolver in .36 caliber. I have yet to fire it. I sold most of my guns when we moved here just over 3 years ago, but I did bring that cap and ball revolver. I'll need .36 caliber lead balls, grease or patches, caps, and powder, none of which I have now. A black powder firearm, as I understand it, is exempt from regular firearms laws. You can order black powder firearms through the mail, or UPS. You don't have to register them. What is everyone using for powder? Black powder, or Pyrodex?
-
Aloha Birdmove, you can find Pyrodex and other substitutes at the local stores. SEC will have it at the cheapest price but call them first. If they don't have it then WGS has it for sure as I saw it there today. They also have other substitutes other than Pyrodex. I have not used any of them however. I have only used Pyrodex.
WGS also carries Hornady Lead Balls in numerous sizes. Plus they carry the #11 caps. I am not sure if they carry patches or not? Since they carry the other items I assume they do. I usually mail order most of my supplies.
I belong to the Black Powder Society here. We meet for shooting every Sunday morning at Kokohead. We always shoot at the rifle range on the far right side from ~7am (Before range opens) until about 10:30am or 11:00am. We have a personal source for black powder but I am not sure it is open for selling to the general public. We buy it at cost and members buy it at cost. If you don't want to join us you might find someone willing to sell you some. But it is usually not the case. If you join our society it will open up the ability to purchase black powder. Why don't you join us one Sunday? Let me know which Sunday I will make sure I bring my black powder guns, supplies and tools to help you get started shooting your revolver. PM me if interested.
-
Thanks, Inspector, but I live on the big island, about 12 miles south of Hilo. I bet one of the Hilo gun stores will have Pyrodex.
-
If you ever are on island on a Sunday morning please stop by and say hello. You are always welcome.
-
Mahalo Inspector :shaka: for showing me how to load and shoot my black powder revolver and also for the other tips I need to know. Awesome group you have out there. My revolver is a reproduction but one guy had the real thing! Thanks also, for letting me shoot your Mosin, that's something I've been wanting to try. :thumbsup:
-
Mahalo Inspector :shaka: for showing me how to load and shoot my black powder revolver and also for the other tips I need to know. Awesome group you have out there. My revolver is a reproduction but one guy had the real thing! Thanks also, for letting me shoot your Mosin, that's something I've been wanting to try. :thumbsup:
inspector is the man!
-
The Mosins may be the last bargain on surplus rifles. I wouldn't mind having one for myself.
-
The Mosins may be the last bargain on surplus rifles. I wouldn't mind having one for myself.
Go get you one
before the supply dries up possibly due to the sanctions on Russia. I was looking on a reputable site that sells german mausers and they are sold out claiming it's because of the sanctions.
-
Just before we moved to the big island in Sept. 2011, I sold an old Mauser bolt action rifle for my Wife's family. Her parents were both deceased, and the family asked me what to do with that Mauser. A local gun store (in Tacoma, Washington) wasn't any help in evaluating the rifle. I ended up selling it through an online gun sales website for $3000.00. I think the family did all right. Sold it to a collector on the east coast.
-
Mahalo Inspector :shaka: for showing me how to load and shoot my black powder revolver and also for the other tips I need to know. Awesome group you have out there. My revolver is a reproduction but one guy had the real thing! Thanks also, for letting me shoot your Mosin, that's something I've been wanting to try. :thumbsup:
You are always welcome!!!