2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: suka on October 02, 2014, 10:12:00 PM
-
Well for Sig they had to be different , although they do make a 1/2x28 threaded barrel. They are extremely hard to get even from Sig themselves.
So what if your suppressor is 1/2x28, not so easy waiting for a new stamp. Well thats a long wait .
Normal sig barrels are threaded 13.5x1 Left.
I found the cheapest chinese tap on ebay for $37. free shipping of course!
Start the lathe and begin machining an adaptor.
1/2x28 suppressor
(http://i1327.photobucket.com/albums/u666/suka5168/IMG_2273_zps75418c37.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_2273_zps75418c37.jpg.html)
13.5x1mm Left
(http://i1327.photobucket.com/albums/u666/suka5168/IMG_2635_zps9b35aecb.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_2635_zps9b35aecb.jpg.html)
On the lathe
(http://i1327.photobucket.com/albums/u666/suka5168/IMG_2572_zps0d065471.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_2572_zps0d065471.jpg.html)
Finished adaptor
(http://i1327.photobucket.com/albums/u666/suka5168/IMG_2636_zpsa725fc3e.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_2636_zpsa725fc3e.jpg.html)
Too long to CCW :( :(
(http://i1327.photobucket.com/albums/u666/suka5168/IMG_2863_zps3e9a685a.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_2863_zps3e9a685a.jpg.html)
-
And the purpose of this thread posted in Hawaii ?
Not trying to be a dick, just curious about it's greater good. :shaka:
-
And the purpose of this thread posted in Hawaii ?
Not trying to be a dick, just curious about it's greater good. :shaka:
+1
-
Do you have any more info on what goes into machining something like this?
-
just pissed that sig had the 13.5 threads
and that with a lathe anything can be adapted to fit , say flash hider or extending a barrel to 16".
-
Do you have any more info on what goes into machining something like this?
just need to get the right tap.
pretty much like using a drill press but horizontal