2aHawaii

General Topics => Off Topic => Topic started by: bass monkey on November 20, 2014, 07:06:11 AM

Title: Looking for some materials
Post by: bass monkey on November 20, 2014, 07:06:11 AM
Hey guys looking for some supplies.  Got a project I wanna do.  Im looking for some bamboo.  If anyone has a patch I could cut pieces out from or know an area I can go cut from let me know.  Looking for pieces 4" around and 6' lengths.  Maybe 20 pieces.
If not does anyone know where I can harvest some strawberry guava?(Same size) Or if anyone has 2x4s laying around they don't want Ill be glad to take them off your hands.  If anyone has or knows where to get let me know.  Looking for cheaper/free types.
Thanks for everyones help.
Title: Re: Looking for some materials
Post by: Jl808 on November 20, 2014, 07:56:49 AM
City Mill has 6 ft bamboo rods cheap in the lumber section.
Title: Re: Looking for some materials
Post by: bass monkey on November 20, 2014, 08:46:32 AM
cool thanks ill go check it out.
Title: Re: Looking for some materials
Post by: oldfart on November 20, 2014, 09:47:12 AM
City Mill has 6 ft bamboo rods cheap in the lumber section.
.
...
Bamboo 4 inch dia. Like a big pipe?
Or 4 inch around as in circumference?
Title: Re: Looking for some materials
Post by: bass monkey on November 20, 2014, 09:57:54 AM
4" like a big pipe.

Actually anything bigger then 2" should hopefully be strong enough.
Title: Re: Looking for some materials
Post by: bass monkey on November 20, 2014, 09:58:19 AM
.
...
Bamboo 4 inch dia. Like a big pipe?
Or 4 inch around as in circumference?

You got something in mind?
Title: Re: Looking for some materials
Post by: macsak on November 20, 2014, 10:09:41 AM
Actually anything bigger then 2" should hopefully be strong enough.

that's not what she said
Title: Re: Looking for some materials
Post by: oldfart on November 20, 2014, 10:15:26 AM
You got something in mind?
...
Bro, that's big bamboo. Mine is not big like dat.
Eh, I thought you moved Molokai?
What kine project dis?
Title: Looking for some materials
Post by: Jl808 on November 20, 2014, 10:17:16 AM
Sorry I just reread your email and realized my mistake. The bamboo rods at City Mill is less than 2" diameter.. Diameter more like 1" something or less.
Title: Re: Looking for some materials
Post by: oldfart on November 20, 2014, 10:25:54 AM
that's not what she said
...
Clown

Lots of room for off color humor here. ;)
Title: Re: Looking for some materials
Post by: bass monkey on November 20, 2014, 10:27:00 AM
Going try make a chicken coup at my parents place.  Gonna use it as posts. Wrap it with orange or black construction fencing. 
Yeah just actually looked at a tape measure and 4" is kinda big.  Smaller should be fine as long as they are ridged.
Didn't want to get small pieces like the type they use for fishing poles that's why I put 4"

Any size should be fine as long as they are sturdy/ridged.
Title: Re: Looking for some materials
Post by: macsak on November 20, 2014, 10:30:25 AM
...
Bro, that's big bamboo. Mine is not big like dat.

too easy...
you must've said that on purpose
 ;D
Title: Re: Looking for some materials
Post by: robtmc on November 20, 2014, 10:43:04 AM
Any size should be fine as long as they are sturdy/ridged.
Sometimes, the posts just beg for off color replies........
Title: Re: Looking for some materials
Post by: Teichi on November 20, 2014, 10:48:58 AM
Check out Ho'oulu Aina in the back of Kalihi past the wood bridge. They have a lot of bamboo and different varieties.
Title: Re: Looking for some materials
Post by: oldfart on November 20, 2014, 10:52:18 AM
too easy...
you must've said that on purpose
 ;D
...
Did not think about it until a few minutes later.
 :stopjack:

But seriously, I have some but I notice it gets weak when it gets old and dried up.
Title: Re: Looking for some materials
Post by: Teichi on November 20, 2014, 10:54:04 AM
Here's the website
http://www.hoouluaina.com/# (http://www.hoouluaina.com/#)!contact/c1et
Title: Re: Looking for some materials
Post by: bass monkey on November 20, 2014, 11:01:07 AM
Thanks teichi.  Ive volunteered there before.  Ill try and talk stories with them.
Title: Re: Looking for some materials
Post by: bass monkey on November 20, 2014, 11:03:50 AM
...
Did not think about it until a few minutes later.
 :stopjack:

But seriously, I have some but I notice it gets weak when it gets old and dried up.


I think it depends on when it was harvested and how it was stored.  Too green and it splits when it dries. Too old and it gets old and dried up and saggy.  Ive been told you harvest when its changing color from green to brown, only the tip is still green.
Title: Re: Looking for some materials
Post by: Jl808 on November 20, 2014, 11:38:45 AM
Going try make a chicken coup at my parents place.  Gonna use it as posts. Wrap it with orange or black construction fencing. 
Yeah just actually looked at a tape measure and 4" is kinda big.  Smaller should be fine as long as they are ridged.
Didn't want to get small pieces like the type they use for fishing poles that's why I put 4"

Any size should be fine as long as they are sturdy/ridged.

I used the ones from City Mill as 5-ft curtain rods...  There is a slight bend towards the middle but I just reinforce it with a curtain hanger in the middle.   Yeah, if you need them 6-ft, then the ones at City Mill might not be sturdy enough.  Worth a look if you're in the area.  They were cheap like $3 or $5 a piece (forgot).
 
Title: Re: Looking for some materials
Post by: bass monkey on November 20, 2014, 11:44:50 AM
I used the ones from City Mill as 5-ft curtain rods...  There is a slight bend towards the middle but I just reinforce it with a curtain hanger in the middle.   Yeah, if you need them 6-ft, then the ones at City Mill might not be sturdy enough.  Worth a look if you're in the area.  They were cheap like $3 or $5 a piece (forgot).


Which city mill is this, the ewa one? 
Its worth a look.
Title: Re: Looking for some materials
Post by: Jl808 on November 20, 2014, 11:47:42 AM
I picked them up at the Kaimuki one.  Maybe give them a call to see if they have it before driving over.

http://www.citymill.com/locations-hours/#ewa (http://www.citymill.com/locations-hours/#ewa)
Title: Re: Looking for some materials
Post by: bass monkey on November 20, 2014, 11:50:52 AM
Thanks bro
Title: Re: Looking for some materials
Post by: Rocky on November 20, 2014, 12:01:55 PM
Marukai on Dillingham by the prison had some 4" x 7' awhile back.
$1.00 each