2aHawaii
General Topics => Off Topic => Topic started by: Tom_G on January 06, 2015, 04:48:39 PM
-
So, the tint on my truck windows is bubbling, folding, etc. It's actually noticeably impairing visibility. I figure I can take a razor blades and cut off some of the larger folds, but I'm worried that if I peel it off, the sticky residue it leaves behind will be a much worse safety hazard that what I've currently got. Anyone know how to clean a window after peeling off tint?
Then, once I've suffered a week with no tint on the windows, just how difficult is it to tint them yourself?
-
If you scrape it yourself use razor blades and a holder for it. It will be much easier with the razor holder.
As far as the residue, use Goo gone and keep scraping. And keep scraping and keep scraping.
-
Safety scraper,dish soap & water in spray bottle.easy
-
I had to take the tint off my suv. So I googled the topic.
Apparently the easy preferred method is to use a clothes steamer to warm the glass.
That is what I did and it worked well.
The idea is to warm the glass so the glue releases from the glass instead of releasing from the film.
The glass should be just uncomfortable to the touch at the point that you are peeling from.
-
The glass should be just uncomfortable to the touch at the point that you are peeling from.
I wonder if a hand held heat gun would do the trick?
If I were to try this, I worry about localized heat cracking the glass. Hard to get the heat spread everywhere, all at once.
Maybe wait for a supernova?
-
id stick with plastic razor blades if possible. tempered glass is hard but will still show fine scratches from a razor blade. may not look bad until you catch afternoon sun and you will see it. the best razor blade holder ive come across is the lisle brand with the red handle :thumbsup:
i have a dupray commercial steamer if you want to give it a go. 192 celcius and 120 psi :shaka: ive stripped lots of tint with it. if its not already delaminating then it should pull off easy with heat and pressure.
-
I wonder if a hand held heat gun would do the trick?
If I were to try this, I worry about localized heat cracking the glass. Hard to get the heat spread everywhere, all at once.
Maybe wait for a supernova?
...
Might be a while to the next supernova.
A heat gun should work. A hair dryer did not have enough horsepower.
It REALLY helps to work as a 2 man team.
One guy warms the glass and the other peels.
I tried doing it alone and it is much more difficult.
-
Safety scraper,dish soap & water in spray bottle.easy
This is correct^^. Once you get the film off the glue isn't that big of a problem.
Doing your own tint isn't really difficult, but it is a pain in the ass. You'll need a shady place to work, scissors and razor cutter, tools to remove the window felts and re-install them when you're finished, window cleaner and something to smooth out the film to get any bubbles out, I've used a stiff squeegee. They may still sell kits for this at auto parts stores but I've used the former to accomplish the task.
Quality of the films they sell in stores varies greatly, cheap ones don't last, good ones are expensive enough to make me think that just taking it to someone else to have it done is worth the money once you figure in the frustration you'll encounter.
-
id stick with plastic razor blades if possible. tempered glass is hard but will still show fine scratches from a razor blade. may not look bad until you catch afternoon sun and you will see it. the best razor blade holder ive come across is the lisle brand with the red handle :thumbsup:
i have a dupray commercial steamer if you want to give it a go. 192 celcius and 120 psi :shaka: ive stripped lots of tint with it. if its not already delaminating then it should pull off easy with heat and pressure.
tom_g
you should contact jaynick
he knows his cars and accessories
and i think you guys live close to each other
cool guy too (ask him to see some flashlights- yes FLASHlights, not the other kind)
-
+3 on dish soap and water in a spray bottle, old shitty rags to wipe goop, razor blades, and patient scraping as to not scratch your glass. Spray it on and let it soak for a few minutes and lightly work the glue and fragments away.
-
+4 dish soap and water.
-
I've gone to tint zone in kalihi a number of times with great results
just in case you dont want to DIY.
-
There is a lot of good tint shop out there. Any good shop around the Ewa Beach area. I've seen a listing in Ewa Beach as a home shop on craigslist, but unable to fine a review on yelp. Anyone know if he does a good job. What is the best tint in the market now. Have not got a tint job for years.
-
I got an estimate online... turns out it's not so crazy expensive as I thought. May well be worth $150 not to mess with it myself!
-
My brother owns Kaamaina Tinting he can do a removal and retint for $100 for 2A members. 3 windows. $125 for 5 windows. I'll remove the tint for you free if you come to my house. I've been in the auto business for over 40 years
-
I took the tint off my wife's car pretty easy from this method my mechanic friend suggested.
1) park car in the hot sun
2) spray windex on the tint liberally
3) apply black trash bags to the windex
4) wait 20 minutes
5)) scrape off with razor
:thumbsup: