2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: kekoa on January 15, 2015, 12:54:34 PM
-
Ok so I have been wanting a Colt Python for sometime now as many of us :thumbsup: I finally purchased one and it is beautiful. One problem though :shake: I had my local gun shop take a look at it to be sure it would be safe to fire a couple of times just to do it before I put it away in the safe. They found a problem, outside the python looks spotless the barrel however has a ring or bulge of some kind at about three inches from the muzzle. We have had three different people look at including a respected gunsmith/armorer locally here on Kauai and probably around the state. All seem to think my python was a victim of a squib round and all believe it would be fine and safe to shoot but the overall collectable value will be diminished. Anyone have an idea of how much the collectable value would be degraded? I would never not disclose the issue if I were to sell it so just trying to figure out if I should send it back to the seller. He has reluctantly agreed to allow the return.
Long one but hoping for some insight.
-
not sure of the price.
but, we need a pic!
-
If I were buying it for the collect-ability, I would rather spend my cash on a gun that's as close to perfect as I could afford.
The prices for collectables are always ballpark, and nobody can predict that gun's value today compared to 25 years from now. I believe this gun in excellent condition as a collectable will increase in value if the rest of the market for that gun rises. The problem is being able to get top price price if you try to sell while many other pythons in better shape are competing with yours.
Not knowing what you spent for it, if you can negotiate a discount from the seller to keep the gun, perhaps make that one a shooter, and look for a better specimen for collecting? You can keep it in the safe until you replace it as your collectable.
Happy you caught the problem while you still have options! Good luck! :thumbsup:
-
If you bought it as a collector's piece I would return it. If you bought it as a shooter then how well did it shoot? I doubt the with that bulge it is not going to shoot that well. I would return it unless I wanted it as a shooter and it was still very accurate. If you bought it as a shooter only, you should have gotten it at a great price. If you didn't I would return it.
-
If you bought it as a collector's piece I would return it. If you bought it as a shooter then how well did it shoot? I doubt the with that bulge it is not going to shoot that well. I would return it unless I wanted it as a shooter and it was still very accurate. If you bought it as a shooter only, you should have gotten it at a great price. If you didn't I would return it.
Yes! I did buy it as a collection piece. I would have to shot it though at least a few times right. I actually never even took it out of the my FFLs hands (so to speak), never completed the transfer. I had my LGS had a gunsmith over here on Kauai look at it and he says the same as you inspector. Sadly I will lose a little on the return ship and more sadly won't have a Colt Python to my name…dang.
-
Personally, that is what I would do. I would also try and make the seller pay for the entire shipping cost for the return trip. It is something he did not divulge prior to the sale. You should not have to pay for it to be returned.
I believe he probably knew about the barrel and was trying to pull one over on you. But in case he didn't know, and if you still want to keep the gun, I suggest you possibly offer him what the gun is worth to you in the condition it is in. Even if the price is extremely low. If he didn't know and he is an honest person he might agree to sell it to you at its current value with the known defect. Because if he is an honest person he will know he probably won't be able to find another buyer easily with a known defect. But I would do this only if you want to keep it and can get it at a price you feel comfortable with.
-
If he will take it back and give you a full refund, RETURN IT.
It makes no sense to keep a problem when perfect condition Colt revolvers only go up in value.
Return it and buy one that is not damaged.
-
If he will take it back and give you a full refund, RETURN IT.
It makes no sense to keep a problem when perfect condition Colt revolvers only go up in value.
Return it and buy one that is not damaged.
...
I agree with kk
Return it if possible.
Seller should have disclosed the damage.
-
I would return it--a highly polished lemon is still a lemon.
-
Thanks for the advise guys. I did in fact return it, the seller was very understanding albeit a little bummed. I just need to hope and pray he really sends my money back. Seems very trust worthy with very good seller rating so I feel pretty good about it, we will see.
Again Mahalos for the input as always…I really really want to have a Python in my safe. This addiction is, well it is :shake:
-
Ever found your python?
-
Last i checked honolulu firearms had a python.
Sent from my SM-G920V using Tapatalk
-
I told a girl once she could pull the trigger on my python. ;)
-
I told a girl once she could pull the trigger on my python. ;)
Premature discharge? :rofl:
-
i think i saw a blued python 6" at young guns. :o
-
I told a girl once she could pull the trigger on my python. ;)
... :shake: :rofl:
-
i think i saw a blued python 6" at young guns. :o
went there a couple weeks ago and they said it sold
-
went there a couple weeks ago and they said it sold
I guess we should expect that. It appeared to be in very good shape but I never actually handled it. :thumbsup: to the guy/gal who owns it!
-
YG's has a couple of the new Colt Cobra's if that's any consolation. ;)
-
assuming you disclosed it, it would downgrade the condition to a shooter most likely, at least in my mind. if accuracy or safety is impaired, then degraded even further. It's possible the seller would be able to sell at maybe 70% of full value to "someone".
if you paid full collector price for it, I would see about trying to return it.
-
Premature discharge? :rofl:
Failure to fire? :shake:
-
YG's has a couple of the new Colt Cobra's if that's any consolation. ;)
Did you fondle, uh I mean hold one? :love:
I would hope the quality of the past would still be present. :thumbsup:
-
Did you fondle, uh I mean hold one? :love:
I would hope the quality of the past would still be present. :thumbsup:
of course I fondled it, stroked it, turned the cylinder and checked the lockup, pulled the trigger (checked that it was unloaded of course), and held it with both hands.
then they took it away from me bc I was getting carried away.
actually I did better than that.....I bought one! :geekdanc:
-
of course I fondled it, stroked it, turned the cylinder and checked the lockup, pulled the trigger (checked that it was unloaded of course), and held it with both hands.
then they took it away from me bc I was getting carried away.
actually I did better than that.....I bought one! :geekdanc:
Oh man that is VERY COOL!!! :worship:
How is the trigger? ???
You HAVE to do a comprehensive range report. :thumbsup:
-
trigger felt smooth in DA, in SA it felt pretty light. I really like the trigger, from only doing a few dry fires.
I like the grip although it may be a bit large for a pocket carry, but I'm not worried about that living in Hawaii
the cylinder release may take some getting used to, but no big deal.
this is my first Colt anything so I'm kind of exited to see how it shoots
i'll do a range report after I pick it up and shoot it maybe in a few weeks. :thumbsup:
-
https://youtu.be/-OHvFZgV-WA
-
I learned something from this video I didn't know or never paid attention to:
S&W revolvers' cylinders revolve counter-clockwise.
Colt revolvers revolve clockwise.
:thumbsup:
https://youtu.be/crxOIK9oXtg
-
I learned something from this video I didn't know or never paid attention to:
S&W revolvers' cylinders revolve counter-clockwise.
Colt revolvers revolve clockwise.
:thumbsup:
https://youtu.be/crxOIK9oXtg
So which way do Rugers revolve? :geekdanc:
-
So which way do Rugers revolve? :geekdanc:
Mine goes counter-clockwise.
(Way to make me go look at mine in the safe!! :wave: )
-
Mine goes counter-clockwise.
(Way to make me go look at mine in the safe!! :wave: )
One more, do you know how to tell which direction a cylinder turns on a revolver just by looking at it (Not even touching it or manipulating it)?
-
One more, do you know how to tell which direction a cylinder turns on a revolver just by looking at it (Not even touching it or manipulating it)?
Yes. The notches on the outside of the cylinder. It's cut to "point" in the direction it turns, then locks up the chamber with the flat edge of the notch.
-
So which way do Rugers revolve? :geekdanc:
Rugers revolve the correct way. :thumbsup:
-
Rugers revolve the correct way. :thumbsup:
In Australia, Rugers revolve clockwise. :geekdanc:
-
of course I fondled it, stroked it, turned the cylinder and checked the lockup, pulled the trigger (checked that it was unloaded of course), and held it with both hands.
then they took it away from me bc I was getting carried away.
actually I did better than that.....I bought one! :geekdanc:
Awesome! Looks like a nice pistol. I looked it up online and I have to admit, I’m interested.
-
One more, do you know how to tell which direction a cylinder turns on a revolver just by looking at it (Not even touching it or manipulating it)?
By asking you or Stang... ;D
-
Y'all know this was from 2 years ago
-
Yes. The notches on the outside of the cylinder. It's cut to "point" in the direction it turns, then locks up the chamber with the flat edge of the notch.
Nice! :thumbsup:
Not everyone knows that.
-
By asking you or Stang... ;D
I have to ask Stang. He's the real expert here. :thumbsup:
-
Y'all know this was from 2 years ago
:P :P :P
-
I have to ask Stang. He's the real expert here. :thumbsup:
No, you're the expert. :worship:
I'm just a Dirty Harry wannabe
-
Y'all know this was from 2 years ago
>:( :rofl:
...doh...
-
I have to ask Stang. He's the real expert here. :thumbsup:
No, you're the expert. :worship:
I'm just a Dirty Harry wannabe
Both of you are super valuable resources! You are avid gun owners and shooters! It’s the combination of the two and your willingness to share your knowledge and experience with others that is so awesome. So many are into guns just to have, which is great. At least to me, those that also enjoying shooting said guns and sharing that first hand experience with others is truly awesome.
-
No, you're the expert. :worship:
I'm just a Dirty Harry wannabe
Somebody’s gotta do it.
-
No, you're the expert. :worship:
I'm just a Dirty Harry wannabe
Dirty Harry carried a S&W. He turned his nose up at Rugers! :rofl: :rofl: :rofl:
-
Dirty Harry carried a S&W. He turned his nose up at Rugers! :rofl: :rofl: :rofl:
That's ok. I can forgive him.
-
Both of you are super valuable resources! You are avid gun owners and shooters! It’s the combination of the two and your willingness to share your knowledge and experience with others that is so awesome. So many are into guns just to have, which is great. At least to me, those that also enjoying shooting said guns and sharing that first hand experience with others is truly awesome.
You are too kind. :shaka:
Some people think I'm just a gun nut.