2aHawaii
General Topics => Preparedness and Survival => Topic started by: paka808 on March 29, 2015, 05:36:13 PM
-
What would be in your bug out bag a knife or axe.?-what type of knife, machete bowie, survival knife, just need some ideas,I'm thinking I'm packing to much.
-
paka808, does your name happen to be Danny Trejo? :o
(http://www.blastr.com/sites/blastr/files/styles/blog_post_media/public/machete.jpg?itok=dCDL5vyC)
-
paka808, does your name happen to be Danny Trejo? :o
(http://www.blastr.com/sites/blastr/files/styles/blog_post_media/public/machete.jpg?itok=dCDL5vyC)
I would be a little more tactical, attach my knives to a plate carrier, chest rig, battle belt,can't help it im Filipino.
-
.
-
Why not both?
18" Tramontina machete cut down to 14-15" in a golok pattern
Some type of fixed blade knife
Norse or Chinese pattern style hatchet.
I was thinking having the machete there was no need of a ax(hatchet)-make more sense having both.thanks. :shaka:
-
I have these packed:
(http://i.imgur.com/rGb61PE.jpg)
United Cutlery M48 Apocalypse Tactical Tomahawk(Model:UC2946)
Blade Material: Black Oxide Coated 2Cr13 Stainless
Handle Material: Paracord wrapped 30% fiberglass reinforced nylon
Blade Length: 8 inches
Overall Length: 15 inches
Sheath: Snap-button closure nylon belt sheath
http://www.amazon.com/exec/obidos/ASIN/B008FO5CXS/?tag=2ahawaii-20 (http://www.amazon.com/exec/obidos/ASIN/B008FO5CXS/?tag=2ahawaii-20)
(http://i.imgur.com/oY4qov8.jpg)
Gerber 31-000751 Bear Grylls Survival Series Ultimate Knife, Serrated Edge
Molded rubber grip and knurled striking surface butt cap
Saw ground back blade
Integrated fire starter with integrated diamond sharpener
Key ground-air communication patch
Emergency micro lanyard whistle
Sheath
http://www.amazon.com/exec/obidos/ASIN/B003R0LSMO/?tag=2ahawaii-20 (http://www.amazon.com/exec/obidos/ASIN/B003R0LSMO/?tag=2ahawaii-20)
https://www.youtube.com/watch?v=vvkCHRbiShI (https://www.youtube.com/watch?v=vvkCHRbiShI)
-
I have these packed:
(http://i.imgur.com/rGb61PE.jpg)
United Cutlery M48 Apocalypse Tactical Tomahawk(Model:UC2946)
Blade Material: Black Oxide Coated 2Cr13 Stainless
Handle Material: Paracord wrapped 30% fiberglass reinforced nylon
Blade Length: 8 inches
Overall Length: 15 inches
Sheath: Snap-button closure nylon belt sheath
http://www.amazon.com/exec/obidos/ASIN/B008FO5CXS/?tag=2ahawaii-20 (http://www.amazon.com/exec/obidos/ASIN/B008FO5CXS/?tag=2ahawaii-20)
(http://i.imgur.com/oY4qov8.jpg)
Gerber 31-000751 Bear Grylls Survival Series Ultimate Knife, Serrated Edge
Molded rubber grip and knurled striking surface butt cap
Saw ground back blade
Integrated fire starter with integrated diamond sharpener
Key ground-air communication patch
Emergency micro lanyard whistle
Sheath
http://www.amazon.com/exec/obidos/ASIN/B003R0LSMO/?tag=2ahawaii-20 (http://www.amazon.com/exec/obidos/ASIN/B003R0LSMO/?tag=2ahawaii-20)
https://www.youtube.com/watch?v=vvkCHRbiShI (https://www.youtube.com/watch?v=vvkCHRbiShI)
I like the tomahawk-ill have to go do some shopping on amazon.
-
How about an axe-saw?
(http://ecx.images-amazon.com/images/I/71Q1olucpfL._SL1500_.jpg)
-
I've got a Benchmade Nimravus 141 Tanto knife and a Spax-16 in my BOB as my main "go-to's".
Of course I've got axes, machete's and other knives but when it comes to my first choices to run with it's those two and I'm pretty content with them so far! :thumbsup:
-
.
-
https://youtu.be/YpcuscEAVhM
https://youtu.be/KdmUnIteRmU
-
- Axe if you're going jungle
- Wreckingbar / crowbar if you're going urban
+ a machete for all around
-
- Axe if you're going jungle
- Wreckingbar / crowbar if you're going urban
+ a machete for all around
I agree. depends on where you are bugging out to, or how long you will be bugged out.
to me bugging out is different than SHTF.
if i am doing an overnight or short time period bugout, I wont bring much. only what will fit in 1-2 bags.
I think an axe or machete is too large for just a short bug out.
but if you plan to be bugged out for a while and are in the woods or brush filled area, and axe or machete would be good.
my all purpose knife/machete/gurkha is this Blackjack Marauder that I got back in 1985
I've used it for many hikes and camping as an all purpose bushwhaker, and it has more than held its own in the field
for a 30 year old knife, it has very little wear on it.
(http://galleryplus.ebayimg.com/ws/web/161129135728_1_0_1/1000x1000.jpg)
-
This one should be sufficient
http://www.gerbergear.com/Military/Knives/LMF-II-Knife_22-41400 (http://www.gerbergear.com/Military/Knives/LMF-II-Knife_22-41400)
You can baton the wood to chop it like an axe.
Having too heavy a BOB means you can't actually bug out when the tsunami hits. You need to carry maybe two quarts of water too.
-
Thanks .everybody for all the useful input, I have 3 bug out bags and 1 med bag.I have a week of food mres.dehydrated foods, water, fire starters i have 2 sons, myself and wife, so I will probably equip each bag with axe, or machete.and some of the blades u guys came up with. :shaka:
-
Always have a big fixed blade on your pack and a decent sized folder on your person. As far as chop chop for the woods or urban ya know I've spent a sh#t ton on all kinds of blades axes and hawks and it's very hard to beat a good ole USGI Machete, period. Affordable, proven, durable, easy to sharpen. I don't baby my blades but it still don't feel good to destroy an expensive one on rocks or something. The USGI (and the bayonets for that matter) is made for such abuse and to keep going. I reprofile the handles to fit my hand better. Add lanyard. Tape or bungee on small packs to the sheath like for first aid or survival stuff. You can put different grinds on different spots on the blade like very narrow near the handle for fine work / shaving (wood or your face if you can handle), jimping or saw blade for the spine, etc. I forget what that grind technique is called but it works. I also like leaf shaped blades a lot for Hawai'i grass cutting. Fast action and also has nice pointy end for social work.
These are great and still great price you can buy a bunch to hand out if needed ;)
(http://i47.tinypic.com/2nog3k.jpg)
-
Stangzilla, here's my mango etched machax ;D
-
Always have a big fixed blade on your pack and a decent sized folder on your person. As far as chop chop for the woods or urban ya know I've spent a sh#t ton on all kinds of blades axes and hawks and it's very hard to beat a good ole USGI Machete, period. Affordable, proven, durable, easy to sharpen. I don't baby my blades but it still don't feel good to destroy an expensive one on rocks or something. The USGI (and the bayonets for that matter) is made for such abuse and to keep going. I reprofile the handles to fit my hand better. Add lanyard. Tape or bungee on small packs to the sheath like for first aid or survival stuff. You can put different grinds on different spots on the blade like very narrow near the handle for fine work / shaving (wood or your face if you can handle), jimping or saw blade for the spine, etc. I forget what that grind technique is called but it works. I also like leaf shaped blades a lot for Hawai'i grass cutting. Fast action and also has nice pointy end for social work.
These are great and still great price you can buy a bunch to hand out if needed ;)
(http://i47.tinypic.com/2nog3k.jpg)
nice, 78
did you grind/sharpen that yourself?
-
Stangzilla, here's my mango etched machax ;D
nice. :thumbsup:
-
Stangzilla, here's my mango etched machax ;D
nice 1 :thumbsup:
-
nice, 78
did you grind/sharpen that yourself?
nert, pic is off intarwebs. I got a wheel and stones but not the steady hand haha!
haven't pulled out the bag o fun in a long time. here's some with one yard duty USGI on top it needs some serious rework but got lazy. I like the ESEE Lite Machete but more for the logo as can get the same from Ontario or is it Tramontina. Either way it's a bag queen for now. The TOPS 230 is real good too but heavy in use. oh great lost the pic now.
-
now you guys got me started.
The 230
-
BK4
-
reworking a pair of USGIs
-
come out come out wherever you arrrrrrrr
O0
-
I <3 farking around with knives. Here's the first waved ZT0560 evar and inspiration for the ZT0620 Emerson. Created (dremeled haha!) right here in Hawaii ;D
Of course major kudos to the man EE himself w/o who we'd not even be talking about this stuff.
(Another excellent and very affordable option to wave is the Kershaw Cryo. At $25 you won't cry if your screw it up either. Might have to disable the spring assist but I haven't tried that yet)
-
reworking a pair of USGIs
I got a USGI. Sometimes I wish I had a shorter blade one, but its great.
Ive also heard of people cutting down the USGI ones and using the extra metal to make smaller fixed blade knifes.
-
I got a USGI. Sometimes I wish I had a shorter blade one, but its great.
Ive also heard of people cutting down the USGI ones and using the extra metal to make smaller fixed blade knifes.
yah is good metal! The 18" is nice balance between weight and reach. Can chop down good sized tree no problemo.
I tried one of those made from truck leaf spring blades and know what? g-a-r-b-a-g-e oh. Chipped dented and rolled edges like aluminum foil in no time. Very disappointed as wanted to like them so much for the style and support biz from that country but no can. Even worse? The spike tang! Couldn't trust the blade not to fly right out the handle EEK talk about a hairy moment.
So, USGI wins. Again. haha!
ps. 'sup bass monkey!!! ALOHA!!!
-
I believe a DECENT large (8"-12") fixed blade knife that has easy and quick access from the BOB is best.
I'm not making a log cabin so no need for an ax or hatchet.
It just need's to cut small limbs, skin and cut thru bone and have defensive capabilities that are immediately accessible.
Mine has it's scabbard fastened (with 3' of para-cord in 1/2 hitches) upside down on upper left of BOB.
:thumbsup:
-
.
-
If weight or space weren't too big of an issue, I'd probably carry 3 things: an axe, a strong knife, and a pocket knife.
If SHTF, I'd probably keep my pocket knife for smaller work, or when i need the knife to be clean. I would hate to have to open food cans with a knife covered in zombie brains. If i was forced to, I'd ditch the axe, but I would always carry at least two knives on me.
-
Good point about separate knifes for eating and fighting. You wouldn''t want any blood-borne pathogens getting mixed in with food.
Any thoughts on using a sword disguised as a walking stick, ala Zatoichi? For SHTF, it seems it would be a superior ready-to-draw weapon than a machete or knife as it would always be carried on hand as a walking stick.
(warning: gore)
https://youtu.be/MNlSoDoEHbQ
-
Good point about separate knifes for eating and fighting. You wouldn''t want any blood-borne pathogens getting mixed in with food.
Any thoughts on using a sword disguised as a walking stick, ala Zatoichi? For SHTF, it seems it would be a superior ready-to-draw weapon than a machete or knife as it would always be carried on hand as a walking stick.
(warning: gore)
https://youtu.be/MNlSoDoEHbQ
Since we're still talking about hypotheticals, a sword can be both good and bad depending on the situation. The good thing is that a sword will allow you to land attacks at a distance. The bad thing is that swords don't do well in close distances. I'd hate to have it wrestled away from me only to be used against me.
In a zombie scenario, I think i'd rather have a spear. I wouldn't mind if it's makeshift where i'm just lashing a knife to the end of a pole--even a sharpened piece of rebar might work too.
-
.
-
I saw this on sale for about $15 and was tempted to grab one.
http://www.amazon.com/exec/obidos/ASIN/B00FF7SHSU/?tag=2ahawaii-20 (http://www.amazon.com/exec/obidos/ASIN/B00FF7SHSU/?tag=2ahawaii-20)
(http://i.imgur.com/24Cqafn.jpg?1)
-
I have a few things to add to this. In a shtf situation you need to be as versatile as possible and carry gear as light as possible.
Therefore
First and foremost is a GOOD multi tool. I cannot stress getting a high quality one any more. I recently purchased a leatherman and it is incredibly versatile. You can start fires with it, you can tighten down or loosen screws, adjust optics, make snares,,,, the list goes on. For less than a pound of weight you can't find a more versatile tool.
Second is a Gerber downrange tomahawk. You can pry with it, chop with it, use it as a hammer, and God forbid you ever need to you can use it as a self defense tool. I seriously reccomend you check it out. It elinates the need for a pry bar, Axe, and hammer.
With these two tools, you literally have elimated the need for 20+ tools in your inventory.
They may be expensive, but I have gotten them both for 50% off,new, from the factory.
-
So, who sells USGI surplus machetes with sheath? Online please, I am sure there are not surplus stores on the BI.
-
.
-
.
-
"The longer blade I use out in the bush, and it works extremely well."
eastern european, huh?
-
.
-
USGI is crap? Tramontina is known for cheap blades. Like all the stacks of their flatware at Costco. Not saying the old blades are some magical metal but I think due more credit than that. The cheaper thinner stuff is crap too easily bent or chipped on rocks where the USGI shrugs it off and you just stone it later.
-
Why can't I have both? :shake:
-
Parang is the best compromise of weight and multi-purpose I have found. You can do just about everything with one.
-
I <3 farking around with knives. Here's the first waved ZT0560 evar and inspiration for the ZT0620 Emerson. Created (dremeled haha!) right here in Hawaii ;D
Of course major kudos to the man EE himself w/o who we'd not even be talking about this stuff.
(Another excellent and very affordable option to wave is the Kershaw Cryo. At $25 you won't cry if your screw it up either. Might have to disable the spring assist but I haven't tried that yet)
that wave is pretty small. does it catch consistently? seems like its more a flat notch then a "wave"
i have a 0620cf in m390 and i was actually surprised at how much better the wave action works than any emerson ive owned or tried and ive tried nearly every model.
the kershaw cqc series with the wave are pretty good for the price but i hate the steel. i dont see the point in modding a cryo when there are so many other options that come waved from the factory. if you mod an american made kershaw with the 14c28n or s30v steel or something decent then it may be more worth while.
https://www.amazon.com/Kershaw-6055-CQC-4KXL-Folding-Knife/dp/B00TAD2NYO this is my favorite out of the kershaw emerson series. 3.9" blade
btw that is nice hardware on the 0560. i want to get some for my 0560 but i havent carried it in a year or two so no point.
-
that wave is pretty small. does it catch consistently? seems like its more a flat notch then a "wave"
i have a 0620cf in m390 and i was actually surprised at how much better the wave action works than any emerson ive owned or tried and ive tried nearly every model.
the kershaw cqc series with the wave are pretty good for the price but i hate the steel. i dont see the point in modding a cryo when there are so many other options that come waved from the factory. if you mod an american made kershaw with the 14c28n or s30v steel or something decent then it may be more worth while.
https://www.amazon.com/Kershaw-6055-CQC-4KXL-Folding-Knife/dp/B00TAD2NYO this is my favorite out of the kershaw emerson series. 3.9" blade
btw that is nice hardware on the 0560. i want to get some for my 0560 but i havent carried it in a year or two so no point.
A couple of friends have those Emersons with the wave opening. I've only toyed with their training knives and they are interesting for sure.
I also have a Kershaw Cryo and yeah, it's an inexpensive blade that I don't mind if it gets trashed. It's a great bottle opener. :thumbsup:
-
I have this in my car.
https://www.amazon.com/Ontario-SP16-Spax-Tool-Black/dp/B00190XOW6/ref=sr_1_1?ie=UTF8&qid=1468319461&sr=8-1&keywords=ontario+rescue+axe
-
Parang is the best compromise of weight and multi-purpose I have found. You can do just about everything with one.
...
Welcome to the forum.
Click here and introduce yourself.
https://2ahawaii.com/index.php?topic=4.0
-
Remember whatever you choose you have to carry, Weight to use ratio is important,
-
this is whats in my pack right now, 3.5 inch blade surface, Total length of 10 inch
(https://images-na.ssl-images-amazon.com/images/I/71-JMsyAmpL._SL1500_.jpg)
-
...
Welcome to the forum.
Click here and introduce yourself.
https://2ahawaii.com/index.php?topic=4.0
Thanks, done. :shaka:
This is the parang that I have. Condor makes really solid stuff for the price. Parangs are better at everything bug-out related than an axe. (You're not going to be building heavy, semi-permanent or permanent structures that necessitate an axe).
(http://cdn.shopify.com/s/files/1/1088/1246/products/condor-machetes-eco-parang-machete-1_1024x1024.jpeg?v=1450372880)
-
.
-
In my get home bag is a Mora fixed blade and aLleatherman Wave. I have a Gransfors Bruk small forest axe with a 17" handle but I think for a backpack, something like a Corona folding saw may be better.
Bought the small axe for when I play axe men in the back of my home.
-
this is whats in my pack right now, 3.5 inch blade surface, Total length of 10 inch
How heavy, or light is that thing? Looks pretty light.
I guess it all depends on what you'll be using it for, but I would prefer an ax that has a bit more weight behind it. That said, the size and weight would be cumbersome. For Hawaii, where there's lots of smaller diameter brush and bushes, I would think a machete/kukri/panang would be pretty good all around, but again, the size of those would make them somewhat cumbersome. I know that there are folding machetes, but I wonder about how sturdy the pivot pin is.
Then there's the bushcraft type knives and all sorts of information on how to utilize them. I would certainly be interested in taking classes like those.
-
How heavy, or light is that thing? Looks pretty light.
I guess it all depends on what you'll be using it for, but I would prefer an ax that has a bit more weight behind it. That said, the size and weight would be cumbersome. For Hawaii, where there's lots of smaller diameter brush and bushes, I would think a machete/kukri/panang would be pretty good all around, but again, the size of those would make them somewhat cumbersome. I know that there are folding machetes, but I wonder about how sturdy the pivot pin is.
Then there's the bushcraft type knives and all sorts of information on how to utilize them. I would certainly be interested in taking classes like those.
20oz is the weight according to there website, I will throw it on the scale to check,
I also carry a couple of cheap wire saws which weigh next to nothing,
I like the axe option over a machete style because it's a little more versatile, can be used to cut wood and as a knife if needed, can be used to break down game, as a hammer,
That being said I'm also more used to European forests then tropical jungle,
-
20oz is the weight according to there website, I will throw it on the scale to check,
I also carry a couple of cheap wire saws which weigh next to nothing,
I like the axe option over a machete style because it's a little more versatile, can be used to cut wood and as a knife if needed, can be used to break down game, as a hammer,
That being said I'm also more used to European forests then tropical jungle,
I used to pack a hand axe in my camping gear when I lived in WA. It was used more as a hammer than an axe. I never really needed to shop much wood and the axe blade was more for taking smaller limbs off. Still a handy tool, but just the compact aspect that is desirable for packing sort of works against it's usual function.
-
Remember whatever you choose you have to carry, Weight to use ratio is important,
Even though we are in the "tropics", I highly doubt I'll be bush wacking my way thru tropical forests to get anywhere and a good blade will be enough to acquire an short term shelter.
Strapped to front of my Go Bag is the 38CKC SRK
CPM 3-V High Carbon with DLC Coating Steel, just under 9oz.
https://www.knifecenter.com/item/CS38CKC/cold-steel-38ckc-srk-survival-rescue-knife-fixed-cpm-3v-black-blade-kray-ex-handle-secure-ex-sheath
6" 's should be enough for any job, eh Mack :rofl: :rofl: :rofl: :wave:
-
Even though we are in the "tropics", I highly doubt I'll be bush wacking my way thru tropical forests to get anywhere and a good blade will be enough to acquire an short term shelter.
Strapped to front of my Go Bag is the 38CKC SRK
CPM 3-V High Carbon with DLC Coating Steel, just under 9oz.
https://www.knifecenter.com/item/CS38CKC/cold-steel-38ckc-srk-survival-rescue-knife-fixed-cpm-3v-black-blade-kray-ex-handle-secure-ex-sheath
6" 's should be enough for any job, eh Mack :rofl: :rofl: :rofl: :wave:
3v :thumbsup:
-
6" 's should be enough for any job, eh Mack :rofl: :rofl: :rofl: :wave:
To a guy, everything is 12"
Sent from my iPhone using Tapatalk
-
To a guy, everything is 12"
Sent from my iPhone using Tapatalk
its not how big your blade is its how you use it.... Right??.. or I'm being lied to.
-
For my most common environment which is our tropical / sub tropical rainforest (jungle) I am finding that the Parang style of knife / machete has become one of my favorites and a great all around tool. Great for clearing the types of vegetation that we primarily have, great chopper and I also use it quite a bit for splitting animals down the spine when dressing them. I like the overall design, shape and blade angle. I can also use the edge near the handle for finer work.
-
I have a katana and a shinobi (ninja sword). The katana is a pretty nice one, but the shinobi is a practical one that is meant to practice cutting techniques. When The Walking Dead came out and Michonne carried that katana all around, my friends were like "you can use those swords!". ;D
Just like guns, the movies make those swords look super light. They actually have a decent amount of heft to them, which actually helps with the cutting. Watermelons don't stand a chance!