2aHawaii
General Topics => General Discussion => Topic started by: antoinebugleboy on September 02, 2011, 02:34:07 PM
-
Is it normal for a brand new gun to have metallic flakes inside the barrel? And for some of the finish on the outside of the barrel rubbed off already?
I haven't fired my SIG P250 yet, and I noticed these things last night.
-
Yes it is normal.
Every firearm should be tested at the factory.
These tests usually include function and firing tests which will show some initial wear on the barrel.
They also don't usually clean the gun after they've fired it, leaving it with a little crust in the barrel.
This is why a break down and cleaning is recommended before firing any new or used firearm.
-
Yes it is normal.
Every firearm should be tested at the factory.
These tests usually include function and firing tests which will show some initial wear on the barrel.
They also don't usually clean the gun after they've fired it, leaving it with a little crust in the barrel.
This is why a break down and cleaning is recommended before firing any new or used firearm.
Thanks!
-
So are you still gong to kokohead this weekend?
-
So are you still gong to kokohead this weekend?
I'll be at the silhouette range 8 a.m. tomorrow morning! :shaka:
-
Watch out, that DAO trigger can be take some getting used to! The SiGP250 has been stigmatized by it's initial models as being a finicky firearm, but after adjustments by SIG, the P250 is solid firearm for the price. Not too mention it's modularity and not having to go through "the system" to change your caliber and frame. :thumbsup:
-
Took a friend out to the range and put several hundred rounds through my new guns. SO MUCH FUN.
Need moar gunz.
-
MOAR GUNZ1!!!1111one
-
I showed up much later than 8 a.m., but I expected at least one person to ask, "Excuse me, do you post on the 2AHawaii boards?" :(
-
I showed up much later than 8 a.m., but I expected at least one person to ask, "Excuse me, do you post on the 2AHawaii boards?" :(
What time were you there? The wife and I were there bright and early, then stayed till about 1030. Shot my .45, .22 rifle, and my newly gained 3-5-7..
-
I showed up much later than 8 a.m., but I expected at least one person to ask, "Excuse me, do you post on the 2AHawaii boards?" :(
What time were you there? The wife and I were there bright and early, then stayed till about 1030. Shot my .45, .22 rifle, and my newly gained 3-5-7..
Got there probably a bit before 10, left around 1.
I was there with my friend and a .22 1911, a 9mm, and a wooden stock Ruger 10/22. Big green duffel bag for the rifle, black hard case full of ammo, black bag for the two guns.
-
Ahh, must have missed you. we started cleaning up around then.. gettting busy on the plinking range too nowdays.
-
Ahh, must have missed you. we started cleaning up around then.. gettting busy on the plinking range too nowdays.
My friend and I set up a target frame with little blue foam men on it, but only later. Much to our dismay, we only hit them a few times.
-
My friend and I set up a target frame with little blue foam men on it, but only later. Much to our dismay, we only hit them a few times.
There was a post recently that said humanoid targets were not allowed.... was that at that range or some other?
-
My friend and I set up a target frame with little blue foam men on it, but only later. Much to our dismay, we only hit them a few times.
There was a post recently that said humanoid targets were not allowed.... was that at that range or some other?
This was at the silhouette range, not the city-run range. I know the city-run ranges don't let you use human silhouette targets, but I don't know what the silhouette range's policy is about that.
Either way, these foam "men" aren't really that humanoid. They're more like blobs with vaguely arm- and leg-like stumps.
-
^ OK, thanks.
I would expect a little powder residue in a new gun, but not metal chips, and definitely not bluing/finish wear --not even if it were in the dealer's display case and had been handled a lot by potential customers.
I do not believe yours is a new gun. Perhaps someone said "Like New" or "Like NRA New," or "a new barrel" or something.
The last actually new semiauto handgun I bought had a little envelope in the box with two fired cartridge cases in it and some kind of registration number written on the envelope. I do not know if they still do that, but it brings up the question as to whether you got any "registered" fired cases with it. This would at least imply that the gun was actually new or at least had only one owner. The other question I would have is whether the serial number on the box matched the number on the gun.
Terry, 230RN
-
^ OK, thanks.
I would expect a little powder residue in a new gun, but not metal chips, and definitely not bluing/finish wear --not even if it were in the dealer's display case and had been handled a lot by potential customers.
I do not believe yours is a new gun. Perhaps someone said "Like New" or "Like NRA New," or "a new barrel" or something.
The last actually new semiauto handgun I bought had a little envelope in the box with two fired cartridge cases in it and some kind of registration number written on the envelope. I do not know if they still do that, but it brings up the question as to whether you got any "registered" fired cases with it. This would at least imply that the gun was actually new or at least had only one owner. The other question I would have is whether the serial number on the box matched the number on the gun.
Terry, 230RN
Just took it out and checked. Serial number matches the box. After firing 250 rounds through it Saturday, I'm happy with its performance. It performed flawlessly except for the cheap Russian rounds my friend picked up at WSG on the way. I shot the same rounds through a Glock the week prior, and it didn't have nearly the kind of difficulty the SIG did, but I think there were one or two misfires. When I switched over to the PMC, then the Winchester, no problems at all.
Given how clean the gun was when I got it, if anyone did sell me a used gun as new, they spent a ton of time to make very little extra money over what they would've gotten selling it used.
For those who care, this was purchased at Young Guns, so if they're in the habit of pulling that kind of stunt on their customers, I guess I've been had. I wouldn't think they'd do as well as they seem to, if they did.
-
^ Jes' my opinion. I'd be glad to be wrong.
-
Don't take it as first hand experience, but from what I hear, the SIG 250 and SP2022 are the budget lines of SIG and as such, don't usually have as nice a finish. It's illegal for anyone to sell a firearm as new if it really isn't, even if it hadn't been fired. I doubt YG would practice that.
-
Don't take it as first hand experience, but from what I hear, the SIG 250 and SP2022 are the budget lines of SIG and as such, don't usually have as nice a finish. It's illegal for anyone to sell a firearm as new if it really isn't, even if it hadn't been fired. I doubt YG would practice that.
I doubt Young Guns would do that, too. I'm happy with my gun after firing it. There was nothing wrong with the finish, just some scratching on the outside of the barrel and flakes inside it. But I'm satisfied that those are normal.
-
OK, like I said, I'm glad to be wrong. I'da maybe dickered a little over the wear issue. But then again, I'm from Brooklyn and I haggle over the price of a pack of gum.