2aHawaii

Tools and Uses => Firearms and Accessories => Topic started by: Kingkeoni on September 04, 2011, 06:50:38 PM

Title: To dry fire or not.
Post by: Kingkeoni on September 04, 2011, 06:50:38 PM
I know there are different schools of thought on the subject but where do you stand?

Do you dry fire your firearms or not?
Title: Re: To dry fire or not.
Post by: ren on September 04, 2011, 06:57:47 PM
Dry firing centerfires i.e an AR is good practice.  A lot of us don,t realize the value of a good sight picture and teaching the trigger finger when to PRESS the trigger when there is a good picture. 
Dry firing a .22 can damage some chambers as the firing may protrude to hit the face of the breech. 
Title: Re: To dry fire or not.
Post by: Teichi on September 04, 2011, 07:32:51 PM
Dry firing also builds muscle memory. There are snap caps and dry firing devicesavailable for different guns. Keep some spackle and matching wall paint handy. Accidents do happen.
Title: Re: To dry fire or not.
Post by: Tom_G on September 04, 2011, 09:40:42 PM
Dry fire, and dry fire often!  For every round you send down range, you should have dry fired 10 times. 

And, for the record, the whole "dry firing a .22 is bad" thing is overblown.  While I don't make a habit of it, I dry fire mine pretty regularly at the range because I have a hard time counting to big numbers like 10.  Many hundreds of inadvertent dry fires over the years, and I've yet to have to replace a single firing pin ot hone a peen out of a single chamber.
Title: Re: To dry fire or not.
Post by: GZire on September 05, 2011, 07:38:46 AM
Dry firing........yes.

BTW for extended practice I would use snap caps.
Title: Re: To dry fire or not.
Post by: peregrine on September 05, 2011, 08:58:52 PM
I'm highly in favor of dry firing.
Pistol dry firing imo has much more versatility and carry over to long arm than long arm to pistol...unless all you plan on doing is shooting off a bench.
Title: Re: To dry fire or not.
Post by: Cougar8045 on September 05, 2011, 09:33:17 PM
At the Navy force protection school I went to, they taught some basics of marksmanship, and had a technique to verify proper trigger pull that involved dry firing.  We all laid down on the firing line, and one instructor went down the line, placing a quarter on top of the flash suppressor.  Then, after we had balanced it for a bit, another instructor would come by and you'd squeeze the trigger.  If the quarter fell, it meant you were flinching or jerking the trigger.  We also did it with M9's.  Just check your manual to see if it's recommended or not.  Some are good to go, others need snap caps.  As far as 22's go, both of my 22's (Ruger 22/45 pistol and 10/22 rifle) require you to dry-fire in order to decock the firearm.  I presume also that pistols like Glock, which require a dry fire for disassembly, must be fine as well.
Title: Re: To dry fire or not.
Post by: Heavies on September 07, 2011, 03:37:16 AM
Dry fire centerfire = Yes
Good practice in a safe location and in a safe direction

Dryfire rimfire = No,
 If you can help it, the less the better.  If you raise up a burr in the rimfire chamber, the gun doc will have to look at it.
Title: Re: To dry fire or not.
Post by: Funtimes on September 07, 2011, 04:44:15 AM
You can also use a fired .22lr casing ontop of your pistol to verify you are not pulling very much.
Title: Re: To dry fire or not.
Post by: Teichi on September 07, 2011, 06:11:53 AM
Match grade .22's are designed to be dry fired. Dry fire is taught at every .22  precion shooting course and observed at every precision .22 shooting event up to Olympic and other international competitions. The same goes with centerfire competitions.
Title: Re: To dry fire or not.
Post by: 2aHawaii on September 07, 2011, 02:41:40 PM
Match grade .22's are designed to be dry fired. Dry fire is taught at every .22  precion shooting course and observed at every precision .22 shooting event up to Olympic and other international competitions. The same goes with centerfire competitions.

So I guess it's RTFM (read the manual) :D
Title: Re: To dry fire or not.
Post by: Cougar8045 on September 07, 2011, 03:28:39 PM
Match grade .22's are designed to be dry fired. Dry fire is taught at every .22  precion shooting course and observed at every precision .22 shooting event up to Olympic and other international competitions. The same goes with centerfire competitions.

So I guess it's RTFM (read the manual) :D
R....T.....  What's the F stand for??    :D
Title: Re: To dry fire or not.
Post by: Tom_G on September 07, 2011, 03:51:16 PM
Read The Friendly Manual, of course!
Title: Re: To dry fire or not.
Post by: Funtimes on September 07, 2011, 05:39:54 PM
Field manual ;)
Title: Re: To dry fire or not.
Post by: djsmiles808 on May 02, 2012, 06:21:22 PM
Ruger 10/22 Rifle Reassembly (http://www.youtube.com/watch?v=1h0ijcHnhwk#)

not sure if this is usable if but if you scroll down



I've heard a lot of conflicting opinions on dry-firing a rimfire.
Is it bad to do it too regularly?
noinlair 2 years ago 9 
All Ruger rifles can be dry fired without damage, and dry firing can be useful to familiarize the owner with the firearm. However, be sure any firearm is completely unloaded before dry firing!
RugerFirearms in reply to noinlair 2 years ago 23 
Title: Re: To dry fire or not.
Post by: clshade on May 02, 2012, 08:56:59 PM
FWIW, don't dry fire black powder percussion cap firearms. Damages the nipples. Not likely to be an issue for most, but just thought I'd mention it.

You can dry fire flintlocks but you'll be wearing out your flint.

Dry firing firearms that are safe to do so is also a great way to get to know you trigger when you first get the gun. No need to burn ammo just to find where the sear breaks.
Title: Re: To dry fire or not.
Post by: dirsh on June 14, 2012, 04:13:50 PM
been thinking about getting this reset kit (along with practice laser)for glocks to help with my trigger pulls

http://glockstore.com/pgroup_descrip/6889_Trigger+Reset+Kit+for+Glock/?return=%3ftpl%3Dsearch%26search_val%3Dtrigger%2Breset (http://glockstore.com/pgroup_descrip/6889_Trigger+Reset+Kit+for+Glock/?return=%3ftpl%3Dsearch%26search_val%3Dtrigger%2Breset)


what's stopping me from getting is that I was worried about always switching out my trigger between range sessions and wearing out the pins and pin holes... That and the kit costs $340 (with magic bullet laser)
Title: Re: To dry fire or not.
Post by: GZire on June 14, 2012, 05:40:58 PM
been thinking about getting this reset kit (along with practice laser)for glocks to help with my trigger pulls

http://glockstore.com/pgroup_descrip/6889_Trigger+Reset+Kit+for+Glock/?return=%3ftpl%3Dsearch%26search_val%3Dtrigger%2Breset (http://glockstore.com/pgroup_descrip/6889_Trigger+Reset+Kit+for+Glock/?return=%3ftpl%3Dsearch%26search_val%3Dtrigger%2Breset)


what's stopping me from getting is that I was worried about always switching out my trigger between range sessions and wearing out the pins and pin holes... That and the kit costs $340 (with magic bullet laser)


I bought one of these:
http://nextleveltraining.com/content/nlt%E2%80%99s-dry-fire-training-pistol-overview (http://nextleveltraining.com/content/nlt%E2%80%99s-dry-fire-training-pistol-overview)


Still evaluating it, but I think it's a good training aid.