2aHawaii

Tools and Uses => Firearms and Accessories => Topic started by: Bcspy on August 15, 2015, 08:44:10 PM

Title: Remington 700 trigger
Post by: Bcspy on August 15, 2015, 08:44:10 PM
Trying to order a Rem 700 trigger.  Looking at Timney. Not to sound stupid. What is the benefits of the flat trigger vs curve. For precision, what lowest pull pound is safe at the range.
Title: Re: Remington 700 trigger
Post by: 808Hunta on August 17, 2015, 08:46:55 AM
Only stupid question is the one not asked bro!  As far as flat vs curved is concerned to me its a personal thing.  Some like them and some don't best scenario is if you could try one before buying to see how it feels for you.  I don't know if theres any benefit per se one vs the other though. 

For precision I'd go as light as possible (few Oz's) as long as this is strictly a bench rifle? If you're not used to light triggers you can do a lot of dry firing to acquire a feel for it.  If its used for hunting etc as well then I'd opt for a little heavier trigger for safety sake. 
Title: Re: Remington 700 trigger
Post by: GZire on August 17, 2015, 08:49:01 AM
Curved triggers especially depending on the amount of radius can lead a perceived change in pull weight/effort.  The theory is the straight trigger doesn't/won't result in that.  IMHO if true you'll only see it at higher pull weights.  Really a shooter preference.

Lowest pound trigger weight..............IMHO once you drop below 4# it start's to get a little dicey.  If you are talking something that is going to be shot off hand/in the field IMHO anything below 4# is probably not a good idea.
Title: Re: Remington 700 trigger
Post by: Bcspy on August 17, 2015, 09:03:50 AM
Thanks great advice.
Title: Re: Remington 700 trigger
Post by: 808Hunta on August 17, 2015, 10:40:01 AM
Curved triggers especially depending on the amount of radius can lead a perceived change in pull weight/effort.  The theory is the straight trigger doesn't/won't result in that.  IMHO if true you'll only see it at higher pull weights.  Really a shooter preference.

Lowest pound trigger weight..............IMHO once you drop below 4# it start's to get a little dicey.  If you are talking something that is going to be shot off hand/in the field IMHO anything below 4# is probably not a good idea.

Aloha GZ,  I respectfully disagree with a less than 4# trigger being not a good idea.  If someone isnt used to a lighter trigger pull it can be surprising but thats where practice comes into play.  By doing dry fire drills you can learn and fix a lot of things to do with your shooting. 

Aloha
Title: Re: Remington 700 trigger
Post by: GZire on August 17, 2015, 11:17:00 AM
Aloha GZ,  I respectfully disagree with a less than 4# trigger being not a good idea.  If someone isnt used to a lighter trigger pull it can be surprising but thats where practice comes into play.  By doing dry fire drills you can learn and fix a lot of things to do with your shooting. 

Aloha


You will notice I had spec'd this out for off hand and field shooting.  In these two instances IMHO I still think a less than 4# trigger is a bad idea.  I'm not talking about shooting at the range here, but humping it around in the field and if you take that same gun and try and shoot off hand at Kokohead I'm fairly sure there will be some discharges before one expects them.
Title: Re: Remington 700 trigger
Post by: 808Hunta on August 17, 2015, 01:20:07 PM

You will notice I had spec'd this out for off hand and field shooting.  In these two instances IMHO I still think a less than 4# trigger is a bad idea.  I'm not talking about shooting at the range here, but humping it around in the field and if you take that same gun and try and shoot off hand at Kokohead I'm fairly sure there will be some discharges before one expects them.

Aloha GZ,  Yes, I noticed that you had spec'd it for offhand and field shooting. That's funny you say that as most all my rifles have from 1/2# set trigger to 2# trigger pulls and I've never had an unexpected discharge.  And all my rifles are hunting rifles not bench rifles I only go to the range to verify loads or when working new loads up. Other than that its all field shooting.  Again dry fire drills isn't just for benchrest shooting it benefits any type of shooting and it can be done right at home.  It benefits your NPA, NRP, Trigger control, Shooting position and the list goes on. I guess it boils down to knowing your firearm well so that it becomes an extension of yourself.

Good Shooting...Aloha!
Title: Re: Remington 700 trigger
Post by: GZire on August 17, 2015, 02:46:31 PM
Aloha GZ,  Yes, I noticed that you had spec'd it for offhand and field shooting. That's funny you say that as most all my rifles have from 1/2# set trigger to 2# trigger pulls and I've never had an unexpected discharge.  And all my rifles are hunting rifles not bench rifles I only go to the range to verify loads or when working new loads up. Other than that its all field shooting.  Again dry fire drills isn't just for benchrest shooting it benefits any type of shooting and it can be done right at home.  It benefits your NPA, NRP, Trigger control, Shooting position and the list goes on. I guess it boils down to knowing your firearm well so that it becomes an extension of yourself.

Good Shooting...Aloha!



Gotcha.  I have to say you're pretty gutsy running around with a 2# trigger, but if it works for you and it doesn't go bang unexpectedly then I think you got your stuff down where it should be.
Title: Re: Remington 700 trigger
Post by: blackheart0311 on August 23, 2015, 04:28:11 PM
I just put in a Timney 520 CE if you have any questions.  I don't have a trigger pull scale, but i did set it maybe around the 2 - 2.5# area. 
Title: Re: Remington 700 trigger
Post by: 808Hunta on August 24, 2015, 09:29:00 PM
Timney's are great have a few of them. I mostly run Jewel's and a few Huber's in my 700's or 700 Custom Variants.