2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: suka on September 05, 2015, 11:10:09 AM
-
Here is a fun conversion which is 100% legal.
non functional position , all semi auto operation
SAFE - SEMI - SEMI
http://youtu.be/_H_0VNbAmUo
-
is the video working?
it's not on my phone.
-
Vid is private
-
Vid is private
fixed?
-
Works! How can I do that to mines one?
-
Can you make a video on how to do it
-
sure
stand by
-
Just buy a M16 selector , several vendors sells these from $26-$70, depends on how fancy you want the sector to be.
The middle block which pushes the disconnector out if the way will need to milled out. A dremel or file can be used, but the steel is hard and may take away.
Install the selector as normal and then it's done.
If installed without removal of the block , the AR will be
SAFE - SEMI - SAFE
(http://i1327.photobucket.com/albums/u666/suka5168/Mobile%20Uploads/27AC3214-25DB-4DC5-901A-5708ECAAA11F_zps9dt3uteb.jpg) (http://s1327.photobucket.com/user/suka5168/media/Mobile%20Uploads/27AC3214-25DB-4DC5-901A-5708ECAAA11F_zps9dt3uteb.jpg.html)
-
Just buy a M16 selector , several vendors sells these from $26-$70, depends on how fancy you want the sector to be.
The middle block which pushes the disconnector out if the way will need to milled out. A dremel or file can be used, but the steel is hard and may take away.
Install the selector as normal and then it's done.
If installed without removal of the block , the AR will be
SAFE - SEMI - SAFE
(http://i1327.photobucket.com/albums/u666/suka5168/Mobile%20Uploads/27AC3214-25DB-4DC5-901A-5708ECAAA11F_zps9dt3uteb.jpg) (http://s1327.photobucket.com/user/suka5168/media/Mobile%20Uploads/27AC3214-25DB-4DC5-901A-5708ECAAA11F_zps9dt3uteb.jpg.html)
thanks :thumbsup:
-
I saw the topic in "Unread Posts" and immediately thought SUKA ;D before looking at who posted the topic :shaka:
-
I saw the topic in "Unread Posts" and immediately thought SUKA ;D before looking at who posted the topic :shaka:
hahahah
-
Receiver:
Semi auto spikes lower....
Its installed with a Bumpfire stock and HiperTouch 2lb trigger.
Also has a reduced weight bolt, buffer and springs.
Plan to bump this at a rate of around 900 rounds a minute, which is the same rate as a normal full auto.
(https://www.dentontactical.com/img/m16a204.jpg)
-
$9 per selector
that's cheap
http://www.keepshooting.com/m-16-selector.html
-
Works great....... :-*
(http://i1327.photobucket.com/albums/u666/suka5168/IMG_2295_zpsuu8ecbj9.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_2295_zpsuu8ecbj9.jpg.html)
(http://i1327.photobucket.com/albums/u666/suka5168/IMG_2296_zps9zgnrszz.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_2296_zps9zgnrszz.jpg.html)
(http://i1327.photobucket.com/albums/u666/suka5168/IMG_2291_zpsrcneynpv.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_2291_zpsrcneynpv.jpg.html)