2aHawaii
Tools and Uses => Reloading => Topic started by: wirecounter on September 07, 2015, 12:53:52 PM
-
So, since I just bought a s***load of mixed once fired pistol brass (9mm & 38 spl), I was wondering how many of us sort pistol brass?
Checked out Oldfart's post from a couple of years ago regarding the difference POI of Fed & Win brass. https://2ahawaii.com/index.php?topic=7656.msg78712#msg78712 (https://2ahawaii.com/index.php?topic=7656.msg78712#msg78712) Please post if you had/noticed any similar experiences. :shaka:
-
So, since I just bought a s***load of mixed once fired pistol brass (9mm & 39 spl), I was wondering how many of us sort pistol brass?
Checked out Oldfart's post from a couple of years ago regarding the difference POI of Fed & Win brass. https://2ahawaii.com/index.php?topic=7656.msg78712#msg78712 (https://2ahawaii.com/index.php?topic=7656.msg78712#msg78712) Please post if you had/noticed any similar experiences. :shaka:
wc, i use the brass sorter from amazon
http://www.amazon.com/exec/obidos/ASIN/B00BFN5TTI/?tag=2ahawaii-20
expensive, but the best purchase we ever made for reloading in terms of time saved and bang for the buck
i am the official hdf brass sorter, and am available for rent for a reasonable fee
:shaka:
-
wc, i use the brass sorter from amazon
http://www.amazon.com/exec/obidos/ASIN/B00BFN5TTI/?tag=2ahawaii-20
expensive, but the best purchase we ever made for reloading in terms of time saved and bang for the buck
i am the official hdf brass sorter, and am available for rent for a reasonable fee
:shaka:
oh, crap
i read the poll more completely
sort by headstamp
well, we just started doing this because some of the .223/5.56 brass is not good for 300 blkout
this is what we got for helping us sort
http://www.amazon.com/exec/obidos/ASIN/B011QY0GXY/?tag=2ahawaii-20
-
oh, crap
i read the poll more completely
sort by headstamp
well, we just started doing this because some of the .223/5.56 brass is not good for 300 blkout
this is what we got for helping us sort
http://www.amazon.com/exec/obidos/ASIN/B011QY0GXY/?tag=2ahawaii-20
:rofl: :rofl: :rofl: :rofl: I am asking about pistol brass . . . :rofl: :rofl: :rofl: :rofl:
:shaka:
-
I don't sort by head stamp any more.
-
I sort by manufacturer since I'm not a bulk reloader. Plus while you inspecting the case, you also see the headstamp.
-
If you had a choice called "maybe" that's what I would pick.
For the 9mm, I usually sort by headstamp unless I know it's close range blasting ammo. (1 to 15 yds)
For close range blasting, it don't matter.
If I'm going to do a shooting match with the possibility of winning prizes, then I definitely sort brass.
Then i drop each round into a chamber gauge to insure successful chambering.
As previously noted, that funky anomaly with the shifting point of jmpact is enough to miss an A zone shot at 25 yds.
For the 45acp, it's a little different. I almost never sort 45 brass unless entering a prize match.
The 45acp is quite forgiving for most practice loads out to 25 yds.
For 223, I try to sort as much as possible.
Anything bigger, I definitely sort.