2aHawaii

Tools and Uses => Firearms and Accessories => Topic started by: suka on September 20, 2015, 07:45:13 PM

Title: HK 9x magazine paddle release modification.
Post by: suka on September 20, 2015, 07:45:13 PM
Back in the 80's when H&K was importing firearms from Germany. The ATF had several modification implemented to prevent direct FA conversions.

One such requirement was to eliminate and block the forward pivot pin with what were know as the "Semi Shelf".
The ATF thus far ; classifies the HK9x type firearm with a forward pivot pin a MG. (  excluding the current batch of POF semi MP5 imports. :crazy:  ) but that is a different story.

Without this pin hole, it prevented the installation of the paddle release for the magazine and only a push button release was imported.
With so many surplus agency MP5 and G3 parts floating around  nowadays, we can easily add a paddle release on a budget.

Our subject was a former Hawaii resident  HK SP89 pistol.
This was a $3000+ semi auto converted to fire full auto with a registered sear.
Even with the legal full auto conversion a forward pivot hole is still a major nono with the ATF.




(http://i1327.photobucket.com/albums/u666/suka5168/5f2859b3-a98f-4e8e-b1b7-8acb08a03fc1_zpsrhy6q0kl.jpg) (http://s1327.photobucket.com/user/suka5168/media/5f2859b3-a98f-4e8e-b1b7-8acb08a03fc1_zpsrhy6q0kl.jpg.html)

(http://i1327.photobucket.com/albums/u666/suka5168/93507b93-81c6-4002-8304-88bc26f332c0_zpsvkuxb0mu.jpg) (http://s1327.photobucket.com/user/suka5168/media/93507b93-81c6-4002-8304-88bc26f332c0_zpsvkuxb0mu.jpg.html)






(http://i1327.photobucket.com/albums/u666/suka5168/IMG_1134_zps6fcrbqia.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_1134_zps6fcrbqia.jpg.html)

Parts required for modification
Top:   G3 surplus mag catch
Right:    G3 surplus paddle and contact piece
Bottom:   stock semi mag catch



(http://i1327.photobucket.com/albums/u666/suka5168/b86b8a2f-c2b6-47af-aff6-20b1b98e730d_zpsiaad9zkk.jpg) (http://s1327.photobucket.com/user/suka5168/media/b86b8a2f-c2b6-47af-aff6-20b1b98e730d_zpsiaad9zkk.jpg.html)

(http://i1327.photobucket.com/albums/u666/suka5168/IMG_1138_zpsgg547qzb.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_1138_zpsgg547qzb.jpg.html)

The G3 contact piece is slightly longer than a standard  MP5 part, it will need to be filed down about 1/32".



(http://i1327.photobucket.com/albums/u666/suka5168/IMG_1141_zpspmezxnj3.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_1141_zpspmezxnj3.jpg.html)

(http://i1327.photobucket.com/albums/u666/suka5168/IMG_1140_zps4dxxohly.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_1140_zps4dxxohly.jpg.html)


With a "pinned and clipped" lower attach it to the receiver; trace the pivot hole. Do not try to attach a unmodified surplus lower to your receiver. ATF deemed it to be manufacturing a unregisterd  MG.
The hole will not be centered on the "shelf".



(http://i1028.photobucket.com/albums/y344/saki302/HK%20BB%20installation/IMG_2118.jpg) (http://s1028.photobucket.com/user/saki302/media/HK%20BB%20installation/IMG_2118.jpg.html)

(http://i1327.photobucket.com/albums/u666/suka5168/IMG_1151_zpsdmaboqgg.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_1151_zpsdmaboqgg.jpg.html)

HK made it difficult to convert the import semis to accept full auto parts. Behind the semi shelf is also a solid blocking bar welded. This prevented just drilling a pivot hole.
Remove the bar completely.
The top picture is not mine as I could not get my camera to focus.



(http://i1327.photobucket.com/albums/u666/suka5168/IMG_1156_zpsaks8nl3t.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_1156_zpsaks8nl3t.jpg.html)

Clamped and ready to drill a 3.10mm hole. what is that in fractions????
Drill thru on one side only , Do not drill the other side as noted below.


(http://i1327.photobucket.com/albums/u666/suka5168/IMG_1157_zpsheh0tqib.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_1157_zpsheh0tqib.jpg.html)

(http://i1327.photobucket.com/albums/u666/suka5168/IMG_1159_zpsgsyc3me2.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_1159_zpsgsyc3me2.jpg.html)










Title: Re: HK magazine paddle release modification.
Post by: suka on September 20, 2015, 07:56:40 PM
All done


https://youtu.be/YVpmc892vQw
Title: Re: HK 9x magazine paddle release modification.
Post by: suka on December 10, 2015, 05:19:47 PM
Welded and all completed with no rattles.

(http://i1327.photobucket.com/albums/u666/suka5168/Mobile%20Uploads/DA2A1FC3-8FB5-4F3F-9BE7-2D2DCC2C7B51_zpsayjxahwx.jpg) (http://s1327.photobucket.com/user/suka5168/media/Mobile%20Uploads/DA2A1FC3-8FB5-4F3F-9BE7-2D2DCC2C7B51_zpsayjxahwx.jpg.html)




(http://i1327.photobucket.com/albums/u666/suka5168/Mobile%20Uploads/D402C86D-9E0F-47AB-B15D-5E700CE824D4_zpsgby6gzqd.jpg) (http://s1327.photobucket.com/user/suka5168/media/Mobile%20Uploads/D402C86D-9E0F-47AB-B15D-5E700CE824D4_zpsgby6gzqd.jpg.html)