2aHawaii

General Topics => General Discussion => Topic started by: vooduchikn on October 11, 2011, 12:35:47 AM

Title: Reloaders for hire
Post by: vooduchikn on October 11, 2011, 12:35:47 AM
So given the cost of ammo out here. What if I was to say we were thinking about an FFL for reloading (packages in hand).  Currently we are reloading various calibers at dirt cheap (as we see it) and that we may be looking into the cost analysis of reloading for sale. Our reloads that we have shot to date are virtually flawless and we are reloading to factory specifications and our calibers have been fired in various weapons.

We have figured that we can reload for almost 1/3 (some calibers more) of the cost of you buying your ammo online and I dare say locally, OGC does have the best deals on .223 and various calibers and we still buy from them often. Carter does have the best deals, and If we cannot beat it, then you know where to go.

We really aren't looking to profit (just to cover operating costs, insurance, and tax) from it, but are looking at making it much cheaper for everyone to go to the range and blast off.  We would of course produce custom ammo as well depending on the need and would be willing to have the customer present when we put the loads together.

1. Would there be interest?
2. Opposition?
3. We will be doing this when we go to the mainland next year regardless.
4. We are willing to teach what we have learned so you can be self supportive. We will teach you on our machines.

I was thinking about this when we reloaded 500 .45 ACP @ ~6 $ for a box of 50.....just throwing that out there...

Currently we are reloading .223/5.57,  9MM, .38 SPC, .357MAG, .40S&W, .44MAG, and .45ACP.



Title: Re: Reloaders for hire
Post by: Kingkeoni on October 11, 2011, 12:37:52 AM
So given the cost of ammo out here. What if I was to say we were thinking about an FFL for reloading (packages in hand).  Currently we are reloading various calibers at dirt cheap (as we see it) and that we may be looking into the cost analysis of reloading for sale. Our reloads that we have shot to date are virtually flawless and we are reloading to factory specifications and our calibers have been fired in various weapons.

We have figured that we can reload for almost 1/3 (some calibers more) of the cost of you buying your ammo online and I dare say locally, OGC does have the best deals on .223 and various calibers and we still buy from them often. Carter does have the best deals, and If we cannot beat it, then you know where to go.

We really aren't looking to profit (just to cover operating costs, insurance, and tax) from it, but are looking at making it much cheaper for everyone to go to the range and blast off.  We would of course produce custom ammo as well depending on the need and would be willing to have the customer present when we put the loads together.

1. Would there be interest?
2. Opposition?
3. We will be doing this when we go to the mainland next year regardless.
4. We are willing to teach what we have learned so you can be self supportive. We will teach you on our machines.

I was thinking about this when we reloaded 500 .45 ACP @ ~6 $ for a box of 50.....just throwing that out there...

Currently we are reloading .223/5.57,  9MM, .38 SPC, .357MAG, .40S&W, .44MAG, and .45ACP.

$6.00 per box of 50?

I'll take it.
Title: Re: Reloaders for hire
Post by: vooduchikn on October 11, 2011, 12:40:34 AM
So given the cost of ammo out here. What if I was to say we were thinking about an FFL for reloading (packages in hand).  Currently we are reloading various calibers at dirt cheap (as we see it) and that we may be looking into the cost analysis of reloading for sale. Our reloads that we have shot to date are virtually flawless and we are reloading to factory specifications and our calibers have been fired in various weapons.

We have figured that we can reload for almost 1/3 (some calibers more) of the cost of you buying your ammo online and I dare say locally, OGC does have the best deals on .223 and various calibers and we still buy from them often. Carter does have the best deals, and If we cannot beat it, then you know where to go.

We really aren't looking to profit (just to cover operating costs, insurance, and tax) from it, but are looking at making it much cheaper for everyone to go to the range and blast off.  We would of course produce custom ammo as well depending on the need and would be willing to have the customer present when we put the loads together.

1. Would there be interest?
2. Opposition?
3. We will be doing this when we go to the mainland next year regardless.
4. We are willing to teach what we have learned so you can be self supportive. We will teach you on our machines.

I was thinking about this when we reloaded 500 .45 ACP @ ~6 $ for a box of 50.....just throwing that out there...

Currently we are reloading .223/5.57,  9MM, .38 SPC, .357MAG, .40S&W, .44MAG, and .45ACP.

$6.00 per box of 50?

I'll take it.

Shit bro, you were here, you watched it happen!  Don't ask what the .223/5.56 cost us! crazy :crazy:
Title: Re: Reloaders for hire
Post by: Kingkeoni on October 11, 2011, 12:44:07 AM
So given the cost of ammo out here. What if I was to say we were thinking about an FFL for reloading (packages in hand).  Currently we are reloading various calibers at dirt cheap (as we see it) and that we may be looking into the cost analysis of reloading for sale. Our reloads that we have shot to date are virtually flawless and we are reloading to factory specifications and our calibers have been fired in various weapons.

We have figured that we can reload for almost 1/3 (some calibers more) of the cost of you buying your ammo online and I dare say locally, OGC does have the best deals on .223 and various calibers and we still buy from them often. Carter does have the best deals, and If we cannot beat it, then you know where to go.

We really aren't looking to profit (just to cover operating costs, insurance, and tax) from it, but are looking at making it much cheaper for everyone to go to the range and blast off.  We would of course produce custom ammo as well depending on the need and would be willing to have the customer present when we put the loads together.

1. Would there be interest?
2. Opposition?
3. We will be doing this when we go to the mainland next year regardless.
4. We are willing to teach what we have learned so you can be self supportive. We will teach you on our machines.

I was thinking about this when we reloaded 500 .45 ACP @ ~6 $ for a box of 50.....just throwing that out there...

Currently we are reloading .223/5.57,  9MM, .38 SPC, .357MAG, .40S&W, .44MAG, and .45ACP.

$6.00 per box of 50?

I'll take it.

Shit bro, you were here, you watched it happen!  Don't ask what the .223/5.56 cost us! crazy :crazy:

I seriously want to buy a bunch of ammo from "Voodu Hills ammo company."
Title: Re: Reloaders for hire
Post by: vooduchikn on October 11, 2011, 12:49:00 AM
So given the cost of ammo out here. What if I was to say we were thinking about an FFL for reloading (packages in hand).  Currently we are reloading various calibers at dirt cheap (as we see it) and that we may be looking into the cost analysis of reloading for sale. Our reloads that we have shot to date are virtually flawless and we are reloading to factory specifications and our calibers have been fired in various weapons.

We have figured that we can reload for almost 1/3 (some calibers more) of the cost of you buying your ammo online and I dare say locally, OGC does have the best deals on .223 and various calibers and we still buy from them often. Carter does have the best deals, and If we cannot beat it, then you know where to go.

We really aren't looking to profit (just to cover operating costs, insurance, and tax) from it, but are looking at making it much cheaper for everyone to go to the range and blast off.  We would of course produce custom ammo as well depending on the need and would be willing to have the customer present when we put the loads together.

1. Would there be interest?
2. Opposition?
3. We will be doing this when we go to the mainland next year regardless.
4. We are willing to teach what we have learned so you can be self supportive. We will teach you on our machines.

I was thinking about this when we reloaded 500 .45 ACP @ ~6 $ for a box of 50.....just throwing that out there...

Currently we are reloading .223/5.57,  9MM, .38 SPC, .357MAG, .40S&W, .44MAG, and .45ACP.

$6.00 per box of 50?

I'll take it.

Shit bro, you were here, you watched it happen!  Don't ask what the .223/5.56 cost us! crazy :crazy:

I seriously want to buy a bunch of ammo from "Voodu Hills ammo company."

 hahaha!  Thanks.....need a good name for it, and some Dillon 1050s for each calibers, the 650s are slow to reconfigure.  I think I have bought 1 box of ammo since I started reloading, only so I could copy it...my copy is better I think!

Title: Re: Reloaders for hire
Post by: Old Guy on October 11, 2011, 01:02:07 AM
Before you get started, check wih the City about Zoning and if such activity is allowed in Residential Zoned area.

Not to mention ATF,  HPD and Fire Dept.

Think you may be classified as a Manufacturor. 

You may have to have Special permit to store Explosives(powder/primers) beyond what is considered "home consumption".

Not to mention,you may be open to "inspection" by concerned agency at any time without notice.
Title: Re: Reloaders for hire
Post by: Foxen on October 11, 2011, 01:51:30 AM
Did you say you would be willing to "teach" people how to reload ammo? 

There is definitely interest here....  =)
Title: Re: Reloaders for hire
Post by: 2aHawaii on October 11, 2011, 03:07:43 AM
Ronak was a reloader I believe. When they left the business, quite a few people noticed.

Make sure you take account of insurance too. That will add to your costs. If you're costs are anywhere near what you think, you'll do a ton of business and have to get one of those motors for your dillon.
Title: Re: Reloaders for hire
Post by: Aegis808 on October 11, 2011, 05:19:27 AM
it would be awesome if there could could somehow be a start for a on-island industry for reloading out here.
Title: Re: Reloaders for hire
Post by: Syclone on October 11, 2011, 06:50:18 AM
I'd buy ammo from you if you could make .45 for $6 a box. How much would 9mm cost?  What bullet heads would you be using, lead or fmj?  What grain heads?  Powder?
Title: Re: Reloaders for hire
Post by: sirkaiks on October 11, 2011, 07:01:45 AM
definately interested.  .45 for 6 bucks? I'll take 1000rds please :shaka:
Title: Re: Reloaders for hire
Post by: Growler67 on October 11, 2011, 07:03:45 AM
Before you get started, check wih the City about Zoning and if such activity is allowed in Residential Zoned area.

Not to mention ATF,  HPD and Fire Dept.

Think you may be classified as a Manufacturor. 

You may have to have Special permit to store Explosives(powder/primers) beyond what is considered "home consumption".

Not to mention,you may be open to "inspection" by concerned agency at any time without notice.

I recall my next door neighbor reloading in his garage whenI was in high school.  Mostly shotgun shells.  Personal use and he never sold his reloads.  I'm not aware that he had any special permit or anything to do so.  That was a while ago and things may have changed though.
Title: Re: Reloaders for hire
Post by: Pizzo on October 11, 2011, 07:31:48 AM
So given the cost of ammo out here. What if I was to say we were thinking about an FFL for reloading (packages in hand).  Currently we are reloading various calibers at dirt cheap (as we see it) and that we may be looking into the cost analysis of reloading for sale. Our reloads that we have shot to date are virtually flawless and we are reloading to factory specifications and our calibers have been fired in various weapons.

We have figured that we can reload for almost 1/3 (some calibers more) of the cost of you buying your ammo online and I dare say locally, OGC does have the best deals on .223 and various calibers and we still buy from them often. Carter does have the best deals, and If we cannot beat it, then you know where to go.

We really aren't looking to profit (just to cover operating costs, insurance, and tax) from it, but are looking at making it much cheaper for everyone to go to the range and blast off.  We would of course produce custom ammo as well depending on the need and would be willing to have the customer present when we put the loads together.

1. Would there be interest?
2. Opposition?
3. We will be doing this when we go to the mainland next year regardless.
4. We are willing to teach what we have learned so you can be self supportive. We will teach you on our machines.

I was thinking about this when we reloaded 500 .45 ACP @ ~6 $ for a box of 50.....just throwing that out there...

Currently we are reloading .223/5.57,  9MM, .38 SPC, .357MAG, .40S&W, .44MAG, and .45ACP.
Yes....yes.......YES!!

Not only will I buy, but I would LOVE to come and learn also!! You can count me in!!  :thumbsup:
Title: Re: Reloaders for hire
Post by: Kingkeoni on October 11, 2011, 07:35:51 AM
definately interested.  .45 for 6 bucks? I'll take 1000rds please :shaka:

1000?

Put me down for 10,000 rounds per caliber.
Title: Re: Reloaders for hire
Post by: Pizzo on October 11, 2011, 07:40:25 AM
definately interested.  .45 for 6 bucks? I'll take 1000rds please :shaka:

1000?

Put me down for 10,000 rounds per caliber.
Damn King, leave some ammo for the rest of us.....hahahaha!!  :rofl:
Title: Re: Reloaders for hire
Post by: Cougar8045 on October 11, 2011, 07:45:00 AM
Outside of rolling your own, buying reloads from a reputable source is by far the cheapest way to go, and I'd buy them.  From your perspective, though, I'd be worried about liability.  I think that having the appropriate BATFE stamps and insurance is going to drive up your costs significantly, but I'm sure that you could stay way under factory prices even so.
Title: Re: Reloaders for hire
Post by: sirkaiks on October 11, 2011, 08:17:02 AM
1000?

Put me down for 10,000 rounds per caliber.

 :rofl:  :worship:
Title: Re: Reloaders for hire
Post by: vooduchikn on October 11, 2011, 06:31:53 PM
Ronak was a reloader I believe. When they left the business, quite a few people noticed.

Make sure you take account of insurance too. That will add to your costs. If you're costs are anywhere near what you think, you'll do a ton of business and have to get one of those motors for your dillon.

Looking into all of it, including the appropriate FFL and local requirements, similar to the change int he FFL law, I am suspecting that the production must be conducted and sold in a commercially zoned area.  Liability insurance and the massive tax (15% - this is what I heard) would be included in the cost.

I can produce them for that much, can't sell them and not go under when it comes to tax and liability.

 I would say they would be cheaper than factory ammo. 

I am also thinking the required FFL would take forever to obtain.

Guess we will see how things pan out.

Still researching.


Now if someone wants to buy components and bring them over, we can teach you what we have learned. PM  me.

Vood
Title: Re: Reloaders for hire
Post by: crazyazzmofo on October 11, 2011, 08:13:28 PM
count me in for some ammo too!!!
das some cheap stuff!! idk about the 10000 rds each caliber  but im in!!  :geekdanc: :shaka:
Title: Re: Reloaders for hire
Post by: Tom_G on October 11, 2011, 09:34:20 PM
Always looking for better prices on ammo!  And a reliable source for .357 158 gr lead SWC.  Maybe I can buy the dies and trade you for rounds?
Title: Re: Reloaders for hire
Post by: Cougar8045 on October 12, 2011, 12:12:40 AM
Well, Voodu, I'd say there's plenty of untapped market potential here. Good idea!
Title: Re: Reloaders for hire
Post by: raudi on October 12, 2011, 08:27:02 AM
I would be interested also.
Title: Re: Reloaders for hire
Post by: Armaggeddon_Armory on October 12, 2011, 01:25:26 PM
The feds tax at 11% on ammo sales.

And before anyone gets excited about $6 boxes of .45aco ammo, it does take time and supplies to reload, so I think it would be a bit more expensive then that. But would still be cheaper than Young Gunz and their rediculous prices on stuff.
Title: Re: Reloaders for hire
Post by: vooduchikn on October 12, 2011, 01:34:50 PM
The feds tax at 11% on ammo sales.

And before anyone gets excited about $6 boxes of .45aco ammo, it does take time and supplies to reload, so I think it would be a bit more expensive then that. But would still be cheaper than Young Gunz and their rediculous prices on stuff.

This is why I mentioned liability insurance, tax, etc. It will cost about 6 bucks to produce, but after tax, title, and liscense, more than that.   Beats the shit out of 18+ dollars a box at YG....