2aHawaii

Tools and Uses => Reloading => Topic started by: oldfart on December 07, 2015, 08:12:16 AM

Title: The Stock Glock Project
Post by: oldfart on December 07, 2015, 08:12:16 AM
The purpose of this project is to search for a 9mm (9x19) handload with the following criteria:
1-Ammunition must be fired from a Glock 17 with original factory bbl
2-Makes USPSA/IPSC minor PF of 125
3-Accuracy at 25 yards less than 3 inches from a bench rest
4-Feed and function with 100% reliability
5-Must cost less than  factory ammo at sale price (less than $10 per box 50)

I have some tests which I'll post. But I'd like to know if anyone has already been there and done that.
Submit a pic of your target if you got one. ...submit load data if possible.
Again, this would be for a stock glock17.
Many other guns can do this but I want to see if a stock glock can be made to shoot like a more expensive gun by tailoring the ammo for it.

Suggestions anyone?




Title: Re: The Stock Glock Project
Post by: oldfart on February 09, 2018, 09:19:12 AM
Bump

It's been 2 years with 500 views and nobody has offered an accurate handload for a stock glock pistol.
Title: Re: The Stock Glock Project
Post by: Inspector on February 09, 2018, 06:13:37 PM
Funny, I don't recall ever seeing this post?

I came up with a load for my Glock 17 eight years ago. Too tired to find the load I'm using. I'll get back to you tomorrow. I don't remember what the test results were? I still have plenty of components if you want to assemble some yourself.
Title: Re: The Stock Glock Project
Post by: Heavies on February 10, 2018, 06:34:30 AM
Don't have a glock, but my 9mm load is 3.2 grns Bullseye with 147 grn SNS cast Coated bullets.  I can give you some if you want to shoot it in your glock and check speed.  Supposedly coated lead is ok in glock barrels but i guess YMMV.    still havn't got around to chronoing them....
Title: Re: The Stock Glock Project
Post by: oldfart on February 10, 2018, 08:40:05 AM
Here's an idea.
If you think you got a bullet that will work to meet my criteria, I'll trade you 1 for 1, any bullet that I have in my shop.
Title: Re: The Stock Glock Project
Post by: macsak on February 10, 2018, 09:01:35 AM
Here's an idea.
If you think you got a bullet that will work to meet my criteria, I'll trade you 1 for 1, any bullet that I have in my shop.

heads
Title: Re: The Stock Glock Project
Post by: oldfart on February 10, 2018, 09:09:20 AM
heads
...
 :rofl:
Yep
Heads too
Title: Re: The Stock Glock Project
Post by: Inspector on February 10, 2018, 09:45:10 AM
I found some load data. I ended up with two loads:

124gr Montana Gold JHP (Not for self defense)
4.2 and 4.4 gr Titegroup
CCI SPP

I usually load just the 4.2gr of Titegroup since all my semis function well with the load and I didn't see any significant difference in accuracy.

I have choke MG 124gr JHP heads so if you want to try some, let me know.
Title: Re: The Stock Glock Project
Post by: oldfart on February 10, 2018, 01:52:31 PM
I found some load data. I ended up with two loads:

124gr Montana Gold JHP (Not for self defense)
4.2 and 4.4 gr Titegroup
CCI SPP

I usually load just the 4.2gr of Titegroup since all my semis function well with the load and I didn't see any significant difference in accuracy.

I have choke MG 124gr JHP heads so if you want to try some, let me know.
...
I'll buy or trade some. A couple hundred will do.
Title: Re: The Stock Glock Project
Post by: Inspector on February 10, 2018, 04:11:55 PM
...
I'll buy or trade some. A couple hundred will do.
Okay, let's trade. What do you have?
Title: Re: The Stock Glock Project
Post by: oldfart on February 10, 2018, 07:25:39 PM
Okay, let's trade. What do you have?
....
All kinds of pistol bullets.
Cast, plated, some coated, some jacketed.
It's like a crack seed store for bullets.
Title: Re: The Stock Glock Project
Post by: Inspector on February 11, 2018, 05:25:12 AM
....
All kinds of pistol bullets.
Cast, plated, some coated, some jacketed.
It's like a crack seed store for bullets.
Never tried coated. Got 9mm
Title: Re: The Stock Glock Project
Post by: oldfart on February 11, 2018, 08:59:50 AM
Never tried coated. Got 9mm
===
no, just coated in 45 cal
6 different types

In 9mm I got all kinds of xtreme plated 115, 124, 135, 147 various styles
Horn HAP 125
MG 115 hp
moly coated lead
cast lubed lead

My daughter calls me a hoarder
Title: Re: The Stock Glock Project
Post by: Inspector on February 11, 2018, 02:53:46 PM
===
no, just coated in 45 cal
6 different types

In 9mm I got all kinds of xtreme plated 115, 124, 135, 147 various styles
Horn HAP 125
MG 115 hp
moly coated lead
cast lubed lead

My daughter calls me a hoarder
How about 100 9mm moly coated lead and 100 coated 45 cal?
Title: Re: The Stock Glock Project
Post by: oldfart on February 11, 2018, 07:43:58 PM
How about 100 9mm moly coated lead and 100 coated 45 cal?
.....
The 9mm moly is not like the new coatings. It's old tech moly. You can have those manuahi.

Let me take inventory of the coated 45 bullets. Maybe I can make up a mix plate of pretty colors.
I also got 45 hollow, ball, jhp.
You have an auto or revolver?
Title: Re: The Stock Glock Project
Post by: Inspector on February 11, 2018, 08:23:04 PM
.....
The 9mm moly is not like the new coatings. It's old tech moly. You can have those manuahi.

Let me take inventory of the coated 45 bullets. Maybe I can make up a mix plate of pretty colors.
I also got 45 hollow, ball, jhp.
You have an auto or revolver?
Revolver. Do you have any in the 185gr-200gr range? Right now I am shooting 250gr LSWC. Getting good results but would like to try something different.

Would really like to try the coated bullets if possible.

Mahalo
Title: Re: The Stock Glock Project
Post by: oldfart on February 11, 2018, 09:24:12 PM
Revolver. Do you have any in the 185gr-200gr range? Right now I am shooting 250gr LSWC. Getting good results but would like to try something different.

Would really like to try the coated bullets if possible.

Mahalo
....
If it's a long colt, these acp bullets don't have a crimp groove and the nose might be so long it doesn't fit the cylinder.
Title: Re: The Stock Glock Project
Post by: macsak on February 11, 2018, 09:28:26 PM
the nose might be so long it doesn't fit the cylinder.

TWSS
Title: Re: The Stock Glock Project
Post by: oldfart on February 11, 2018, 10:32:40 PM
TWSS
....
 :rofl:
Perv
Title: Re: The Stock Glock Project
Post by: oldfart on March 28, 2018, 06:50:05 PM
I think I found the magic load.
Title: Re: The Stock Glock Project
Post by: macsak on March 28, 2018, 07:00:16 PM
I think I found the magic load.

heads
Title: Re: The Stock Glock Project
Post by: Inspector on March 28, 2018, 07:01:04 PM
I think I found the magic load.
Perv  :rofl:

Seriously that’s pretty good shootin’  I assume it was at 25 yards
Title: Re: The Stock Glock Project
Post by: oldfart on March 28, 2018, 10:00:15 PM
Perv  :rofl:

Seriously that’s pretty good shootin’  I assume it was at 25 yards
....
Yeah, 25 from the bench.
This is the best I've ever seen my glock17 work.
Vital stats....
Xtreme plated 124 flat point
6.3 gr. Hogdon HS6
Fed. Cases and Fed.100 primers
Loa=1.05 and taper to .....375
1143 AV. 15 st. Dev.
Power factor=141
Cost $7.10 per 50 (w/recycled brass)
Title: Re: The Stock Glock Project
Post by: rklapp on March 29, 2018, 11:59:07 PM
I think I found the magic load.
P-ting!!!   :geekdanc:
Title: Re: The Stock Glock Project
Post by: Inspector on March 30, 2018, 06:09:30 AM
....
Yeah, 25 from the bench.
This is the best I've ever seen my glock17 work.
Vital stats....
Xtreme plated 124 flat point
6.3 gr. Hogdon HS6
Fed. Cases and Fed.100 primers
Loa=1.05 and taper to .....375
1143 AV. 15 st. Dev.
Power factor=141
Cost $7.10 per 50 (w/recycled brass)
We still should exchange some bullets for more testing.
Title: Re: The Stock Glock Project
Post by: oldfart on March 30, 2018, 09:43:26 AM
We still should exchange some bullets for more testing.
-------
you wanna try these 124s?
I got plenty.
Title: Re: The Stock Glock Project
Post by: shdws on March 30, 2018, 10:58:10 AM
oldfart, im going to put 9mm back on my list of cartridges to reload now.  You're making me busier than I've ever been in my life - all your fault!  :shaka:
Title: Re: The Stock Glock Project
Post by: Inspector on March 30, 2018, 11:03:46 AM
-------
you wanna try these 124s?
I got plenty.
Sure! I'll trade you one-for-one for Montana Gold 124gr JHP.
Title: Re: The Stock Glock Project
Post by: Inspector on March 30, 2018, 11:04:27 AM
oldfart, im going to put 9mm back on my list of cartridges to reload now.  You're making me busier than I've ever been in my life - all your fault!  :shaka:
Yeah, he's kinda like the local crack dealer. Only better!  :rofl: :rofl: :rofl:
Title: Re: The Stock Glock Project
Post by: oldfart on March 30, 2018, 11:24:25 AM
Yeah, he's kinda like the local crack dealer. Only better!  :rofl: :rofl: :rofl:
...
Crack seed, not crack

Cuz I stay pake li'dat