2aHawaii
General Topics => General Discussion => Topic started by: antoinebugleboy on October 15, 2011, 09:22:31 PM
-
I was at the silhouette range with my wife today, shooting the 1911 22 and having fun, when all of a sudden, the guide rod flew out of my gun! When I disassembled my gun and took a look at it, it was exactly like what you see in this video:
GSG 1911 Broken Guide Rod (http://www.youtube.com/watch?v=6aazxqysqRM#ws)
To top it off, the spring flew off and I can't find it. :( I think there's a general recall on these guns, too. I'll have to call SIG Monday and find out for sure. It's a fun gun, and other than this, I haven't had any real problems with it, though I'm finding some uncomplimentary things on the web about this gun: slides cracking big pieces off, chunks flying off, etc. Looking closely at my gun, I see a "fault line" in the back of the slide where the hammer drops.
Needless to say, I'm very disappointed. I guess I'll have to retract my recommendation for this gun and suggest instead that if you want to shoot 22s out of a 1911, get a real 1911 get a conversion kit. :-/
-
I was at the silhouette range with my wife today, shooting the 1911 22 and having fun, when all of a sudden, the guide rod flew out of my gun! When I disassembled my gun and took a look at it, it was exactly like what you see in this video:
GSG 1911 Broken Guide Rod (http://www.youtube.com/watch?v=6aazxqysqRM#ws)
To top it off, the spring flew off and I can't find it. :( I think there's a general recall on these guns, too. I'll have to call SIG Monday and find out for sure. It's a fun gun, and other than this, I haven't had any real problems with it, though I'm finding some uncomplimentary things on the web about this gun: slides cracking big pieces off, chunks flying off, etc. Looking closely at my gun, I see a "fault line" in the back of the slide where the hammer drops.
Needless to say, I'm very disappointed. I guess I'll have to retract my recommendation for this gun and suggest instead that if you want to shoot 22s out of a 1911, get a real 1911 get a conversion kit. :-/
That sucks, but as long as no one was hurt. My brother-in-law had the same issue. He called, gave them the serial # and received a parts kit 4 days later.
-
damn man! but it was so pretty! hope everything works out.
-
*cough* 1911!!! /cymbaltap!
-
that sucks. but we're lucky you or anyone around you didn't get hurt.
-
I hope they fix it for you but after this, might I recommend a Ruger Mark 3.
This gun is built SOLID
I have three of these Rugers.
Two Mark 2's and a Mark 3.
Great 22lr pistols.
-
My original choices were the Ruger Mark III and Glock 17, but I got swayed by lower prices (which, in the end, didn't turn out to be that much lower). Looking back, if I could do it again, I'd probably get the Ruger Mark III and Glock 19. I still like my guns, but with this guide rod problem, and the P250's long double-action only trigger pull, I'm having some minor regrets.
-
Sorry to hear that... =(
-
Ouch! I'm glad no one got hurt.
-
My original choices were the Ruger Mark III and Glock 17
Two excellent guns
-
Called SIG this morning and they're shipping out a replacement part. Didn't even ask for my serial number. :thumbsup:
-
Called SIG this morning and they're shipping out a replacement part. Didn't even ask for my serial number. :thumbsup:
good to hear :thumbsup:
-
My original choices were the Ruger Mark III and Glock 17, but I got swayed by lower prices (which, in the end, didn't turn out to be that much lower). Looking back, if I could do it again, I'd probably get the Ruger Mark III and Glock 19. I still like my guns, but with this guide rod problem, and the P250's long double-action only trigger pull, I'm having some minor regrets.
Luckily for you this is not permanent. You can fix it and sell it.
-
My original choices were the Ruger Mark III and Glock 17, but I got swayed by lower prices (which, in the end, didn't turn out to be that much lower). Looking back, if I could do it again, I'd probably get the Ruger Mark III and Glock 19. I still like my guns, but with this guide rod problem, and the P250's long double-action only trigger pull, I'm having some minor regrets.
Luckily for you this is not permanent. You can fix it and sell it.
Until the guide rod broke, I was perfectly happy with my 1911 22. We'll see if the replacement part works any better.
As for the P250c, I may trade it in for a Glock 19. It's not a bad gun. It's a really good gun, actually. The DAO trigger just makes accurate shooting more difficult.
I do wish we could shoot 9mm carbines at the silhouette range, though. I have no idea whether I hit that bell, because the .22 slug is so small. :(
-
My original choices were the Ruger Mark III and Glock 17, but I got swayed by lower prices (which, in the end, didn't turn out to be that much lower). Looking back, if I could do it again, I'd probably get the Ruger Mark III and Glock 19. I still like my guns, but with this guide rod problem, and the P250's long double-action only trigger pull, I'm having some minor regrets.
Luckily for you this is not permanent. You can fix it and sell it.
Until the guide rod broke, I was perfectly happy with my 1911 22. We'll see if the replacement part works any better.
As for the P250c, I may trade it in for a Glock 19. It's not a bad gun. It's a really good gun, actually. The DAO trigger just makes accurate shooting more difficult.
I do wish we could shoot 9mm carbines at the silhouette range, though. I have no idea whether I hit that bell, because the .22 slug is so small. :(
Not when you get used to it. Its not a true DAO. Come shoot with us and see what you think. I love the Glock trigger. Not as crisp as my 1911, but no issues with them out of the box. There are several kits you can install to change the feel. I like them stock. I put 30 rounds through a hole the size of a silver dollar rather quickly. Like anything, it takes practice.
-
My original choices were the Ruger Mark III and Glock 17, but I got swayed by lower prices (which, in the end, didn't turn out to be that much lower). Looking back, if I could do it again, I'd probably get the Ruger Mark III and Glock 19. I still like my guns, but with this guide rod problem, and the P250's long double-action only trigger pull, I'm having some minor regrets.
Luckily for you this is not permanent. You can fix it and sell it.
Until the guide rod broke, I was perfectly happy with my 1911 22. We'll see if the replacement part works any better.
As for the P250c, I may trade it in for a Glock 19. It's not a bad gun. It's a really good gun, actually. The DAO trigger just makes accurate shooting more difficult.
I do wish we could shoot 9mm carbines at the silhouette range, though. I have no idea whether I hit that bell, because the .22 slug is so small. :(
Not when you get used to it. Its not a true DAO. Come shoot with us and see what you think. I love the Glock trigger. Not as crisp as my 1911, but no issues with them out of the box. There are several kits you can install to change the feel. I like them stock. I put 30 rounds through a hole the size of a silver dollar rather quickly. Like anything, it takes practice.
Sorry, I didn't write that very clearly. The DAO is on the SIG P250, which is the gun I currently own. I really like the Glock trigger, and have no problems with it.