2aHawaii

General Topics => General Discussion => Topic started by: GZire on October 21, 2011, 08:45:01 AM

Title: Kokohead: Pistol range
Post by: GZire on October 21, 2011, 08:45:01 AM
I need to go and sight in my new irons on my pistol.

I don't remember if the pistol side had extra frames and I need to just bring targets.  What say ye all?
Title: Re: Kokohead: Pistol range
Post by: Tom_G on October 21, 2011, 09:06:19 AM
Bring your own frames. 
Title: Re: Kokohead: Pistol range
Post by: antoinebugleboy on October 21, 2011, 09:12:36 AM
Second that. If you want to be entrepreneurial, make two, and sell one for a profit.
Title: Re: Kokohead: Pistol range
Post by: GZire on October 21, 2011, 09:16:56 AM
OK, I'm off to YG at lunch to buy a frame.   Thnkx
Title: Re: Kokohead: Pistol range
Post by: Funtimes on October 21, 2011, 11:14:47 PM
OK, I'm off to YG at lunch to buy a frame.   Thnkx

If you just take the measurements, you can pretty much build one in the store at lowes or home depot.  I just buy the lumber, have them cut it in store, and then drill holes.. all pow! The cost is cheap, about 4-5 dollars a stand.
Title: Re: Kokohead: Pistol range
Post by: bass monkey on October 22, 2011, 08:31:21 AM
A little of topic, but i was surprised to see someone selling frames at the gun show.  I was like wow.  Understandable though, not everyone has access to what i would consider "normal" tools.  (chop sw, sawzall, etc)
Title: Re: Kokohead: Pistol range
Post by: GZire on October 24, 2011, 09:23:15 AM
OK, I'm off to YG at lunch to buy a frame.   Thnkx

If you just take the measurements, you can pretty much build one in the store at lowes or home depot.  I just buy the lumber, have them cut it in store, and then drill holes.. all pow! The cost is cheap, about 4-5 dollars a stand.

I built one before.  I don't remember where I put it.   :wacko:
Title: Re: Kokohead: Pistol range
Post by: antoinebugleboy on October 24, 2011, 09:49:12 AM
Buy your lumber at Home Depot. They'll cut it for you for free. The only tool you really need is a drill.
Title: Re: Kokohead: Pistol range
Post by: Cougar8045 on October 24, 2011, 10:12:23 AM
Buy your lumber at Home Depot. They'll cut it for you for free. The only tool you really need is a drill.
No, no, no!  I wish people would stop saying that Home Depot will cut your lumber for you.  You need to tell your wife that in order to build a frame, you need to buy a cordless drill, preferably from a quality manufacturer like Milwaukee or DeWalt, and a sliding compound miter saw, again from a good manufacturer.  Then you'll need a drill press, a good-size work bench, and various hand tools and drill bits.   :geekdanc: 

Or, at least that's how it works for me!   >:D
Title: Re: Kokohead: Pistol range
Post by: antoinebugleboy on October 24, 2011, 11:00:43 AM
Buy your lumber at Home Depot. They'll cut it for you for free. The only tool you really need is a drill.
No, no, no!  I wish people would stop saying that Home Depot will cut your lumber for you.  You need to tell your wife that in order to build a frame, you need to buy a cordless drill, preferably from a quality manufacturer like Milwaukee or DeWalt, and a sliding compound miter saw, again from a good manufacturer.  Then you'll need a drill press, a good-size work bench, and various hand tools and drill bits.   :geekdanc: 

Or, at least that's how it works for me!   >:D

(http://powerpot.webs.com/photos/129149564377683207-1.jpg)
Title: Re: Kokohead: Pistol range
Post by: GZire on October 24, 2011, 11:06:49 AM
^^^I had my guys build my good rifle frame.  Then I shot one leg up with my H&K USC.  I can thank the idiots at Kokohead who don't know how to line up their targets properly for shooting out my target at 100 yds when they have improperly set up their frame at 50 yds.
Title: Re: Kokohead: Pistol range
Post by: Kingkeoni on October 24, 2011, 12:15:50 PM
^^^I had my guys build my good rifle frame.  Then I shot one leg up with my H&K USC.  I can thank the idiots at Kokohead who don't know how to line up their targets properly for shooting out my target at 100 yds when they have improperly set up their frame at 50 yds.

Haha, it sounds like someone is having fun with you.

I like shooting my friends tatgets on occasion just to mess with them.
Title: Re: Kokohead: Pistol range
Post by: GZire on October 24, 2011, 01:00:57 PM
^^^I don't know them and they aren't having fun with me.

Next time you go to the range look at how people set up their targets.  Rarely do they set them up in the correct lanes.  If they set up two targets, one at 50 yds and one at 100 yds, they do not set them up in the same lane.  They do not offset into the open lane to shoot offhand/kneeling/prone, they continue to shoot from the bench.  This means that they end up shooting the target to the sides of them.  I've even seen some guys so bad that they are shooting targets two benches over (given those guys didn't set up in the correct lanes too, but sometimes you don't have a choice because the people there first [to the sides] didn't set up and are forcing you over).
Title: Re: Kokohead: Pistol range
Post by: Foxen on October 24, 2011, 01:30:43 PM
^^^I don't know them and they aren't having fun with me.

Next time you go to the range look at how people set up their targets.  Rarely do they set them up in the correct lanes.  If they set up two targets, one at 50 yds and one at 100 yds, they do not set them up in the same lane.  They do not offset into the open lane to shoot offhand/kneeling/prone, they continue to shoot from the bench.  This means that they end up shooting the target to the sides of them.  I've even seen some guys so bad that they are shooting targets two benches over (given those guys didn't set up in the correct lanes too, but sometimes you don't have a choice because the people there first [to the sides] didn't set up and are forcing you over).

Some of us have REALLY poor eyesight.  Okay, not that bad to the point where I start shooting other peoples' targets.  What I did was line it up based on the guys NEXT to me.  Heh...if my targets are two lane over from his... then at least I am consistent!
Title: Re: Kokohead: Pistol range
Post by: 808shooter on October 24, 2011, 07:25:57 PM
Buy your lumber at Home Depot. They'll cut it for you for free. The only tool you really need is a drill.
No, no, no!  I wish people would stop saying that Home Depot will cut your lumber for you.  You need to tell your wife that in order to build a frame, you need to buy a cordless drill, preferably from a quality manufacturer like Milwaukee or DeWalt, and a sliding compound miter saw, again from a good manufacturer.  Then you'll need a drill press, a good-size work bench, and various hand tools and drill bits.   :geekdanc: 

Or, at least that's how it works for me!   >:D ;D

OMG, you know some people get their range time revoked for suggestions like that
Title: Re: Kokohead: Pistol range
Post by: Cougar8045 on October 24, 2011, 07:35:40 PM
Buy your lumber at Home Depot. They'll cut it for you for free. The only tool you really need is a drill.
No, no, no!  I wish people would stop saying that Home Depot will cut your lumber for you.  You need to tell your wife that in order to build a frame, you need to buy a cordless drill, preferably from a quality manufacturer like Milwaukee or DeWalt, and a sliding compound miter saw, again from a good manufacturer.  Then you'll need a drill press, a good-size work bench, and various hand tools and drill bits.   :geekdanc: 

Or, at least that's how it works for me!   >:D ;D

OMG, you know some people get their range time revoked for suggestions like that
Repeat after me: "I know it's expensive, honey, but these tools will last a lifetime, and I can use them to do counters, build cabinets, make little girls' rocking horses, and finally finish those kitchen upgrades you're so keen on."   :thumbsup:
Title: Re: Kokohead: Pistol range
Post by: Pnut Bandit on July 01, 2013, 10:21:21 PM
Does anyone know how many yards/meter is the khsc pistol range set up for?

Web site is sorely in need of updating.  Looks like a 1990s BBS / Website LOL

Any help from member would be greatly appreciated.        :shaka:

I get much quicker response to questions from forum members than waiting for city and county range personnel response from my email request.. 

Yes i said it.... Lack of customer service haha... :wtf:              :grrr:
Title: Re: Kokohead: Pistol range
Post by: moosed on July 01, 2013, 10:27:23 PM
Does anyone know how many yards/meter is the khsc pistol range set up for?

Web site is sorely in need of updating.  Looks like a 1990s BBS / Website LOL

Any help from member would be greatly appreciated.        :shaka:

I get much quicker response to questions from forum members than waiting for city and county range personnel response from my email request.. 

Yes i said it.... Lack of customer service haha... :wtf:              :grrr:

I believe it's 25 and 50 yards.
Title: Re: Kokohead: Pistol range
Post by: Teichi on July 01, 2013, 10:30:44 PM
25 and 50 yards like all NRA/CMP Conventional Outdoor Pistol Ranges.
Title: Re: Kokohead: Pistol range
Post by: BLKDRGN on July 01, 2013, 10:41:53 PM
Wow Super Saiyan necro!
Title: Re: Kokohead: Pistol range
Post by: stangzilla on July 02, 2013, 07:24:51 AM
(http://farm9.staticflickr.com/8337/8229373244_492d13574c_c.jpg) (http://www.flickr.com/photos/70099529@N03/8229373244/)

http://www.khsc.info/images/FramePDFs/pistolframe.pdf (http://www.khsc.info/images/FramePDFs/pistolframe.pdf)
Title: Re: Kokohead: Pistol range
Post by: Alan A. on July 04, 2013, 12:08:23 PM
Kokohead open today?

Aloha!!
Title: Re: Kokohead: Pistol range
Post by: michalebsdad on July 04, 2013, 12:20:47 PM
Kokohead open today?

Aloha!!

It is open til 1600...2ahawaii bbq after!
Title: Re: Kokohead: Pistol range
Post by: Funtimes on July 04, 2013, 10:49:59 PM
No, no, no!  I wish people would stop saying that Home Depot will cut your lumber for you.  You need to tell your wife that in order to build a frame, you need to buy a cordless drill, preferably from a quality manufacturer like Milwaukee or DeWalt, and a sliding compound miter saw, again from a good manufacturer.  Then you'll need a drill press, a good-size work bench, and various hand tools and drill bits.   :geekdanc: 

Or, at least that's how it works for me!   >:D ;D


OMG, you know some people get their range time revoked for suggestions like that
Repeat after me: "I know it's expensive, honey, but these tools will last a lifetime, and I can use them to do counters, build cabinets, make little girls' rocking horses, and finally finish those kitchen upgrades you're so keen on."   :thumbsup:

Yeah uh... we rent.

But at my old place in Kingsland Georgia, I had everything you could need to fix a house.  Table saw, 12" compound miter, air compressor / nail guns, other saws, drills, etc. etc.
Title: >:D
Post by: Q on July 04, 2013, 11:31:03 PM
 >:D
Title: Re: Kokohead: Pistol range
Post by: branz1029 on July 04, 2013, 11:41:31 PM
^^^I had my guys build my good rifle frame.  Then I shot one leg up with my H&K USC.  I can thank the idiots at Kokohead who don't know how to line up their targets properly for shooting out my target at 100 yds when they have improperly set up their frame at 50 yds.

That's nuts, I would get kinda irritated myself
Title: Re: Kokohead: Pistol range
Post by: branz1029 on July 04, 2013, 11:44:14 PM
As per the old timers at Kokohead:

Don't waste your time and money; buy the cheapest lumber that can be used (or use free scraps from city mill if you are lucky), some shims and some nails, and make a ghetto frame that will work.

I recently made a takedown frame with custom heat shaped PVC joints; one misplaced shot, and all my hard work went down the crapper, and I had to shoot at the 200m steel targets for the rest of the day.

Since then, I took 'unko's' advice and just find cheap wood and make ghetto frames. Personally, the most important part is getting the frame to stand upright and stay put; who cares what it looks like.

Yeah I learned that lesson making a killer takedown frame for the pistol range using some expensive prime indoor pressed wood, than my wife shot my frame and unlike cheap wood, the wood I had just totally snapped in half with one shot.....so I fixed it and make a ghetto frame just for the lady!!!
Title: Re: Kokohead: Pistol range
Post by: Jl808 on July 05, 2013, 06:32:00 AM
Duct tape is your friend!  Enough duct tape can reinforce any part of the wood that has been shot up. :)
Title: Re: Kokohead: Pistol range
Post by: 308gunner on July 05, 2013, 07:01:58 AM
During one visit I notice there was some pounding going on at the base area.

Do you need to bring "wedges" to keep the pistol target firmly secured?
Title: Re: Kokohead: Pistol range
Post by: macsak on July 05, 2013, 07:09:25 AM
there's all kinds of little scrap shards on the ground from other people's shot up frames
i just grab a few of those and use them to wedge in my frame

During one visit I notice there was some pounding going on at the base area.

Do you need to bring "wedges" to keep the pistol target firmly secured?
Title: Re: Kokohead: Pistol range
Post by: macsak on July 05, 2013, 07:12:04 AM
da unkos are usually right
we were discussing this with nomemclature yesterday at the range get together
he said he hasn't figured out how to make a collapsible stand that was easy to carry on his motorcycle
we said to use c-clamps or staple a stiff piece of plastic like a political sign

As per the old timers at Kokohead:

Don't waste your time and money; buy the cheapest lumber that can be used (or use free scraps from city mill if you are lucky), some shims and some nails, and make a ghetto frame that will work.

I recently made a takedown frame with custom heat shaped PVC joints; one misplaced shot, and all my hard work went down the crapper, and I had to shoot at the 200m steel targets for the rest of the day.

Since then, I took 'unko's' advice and just find cheap wood and make ghetto frames. Personally, the most important part is getting the frame to stand upright and stay put; who cares what it looks like.
Title: Re: Kokohead: Pistol range
Post by: Nomenclature on July 05, 2013, 10:24:01 AM
Yeah I learned that lesson making a killer takedown frame for the pistol range using some expensive prime indoor pressed wood, than my wife shot my frame and unlike cheap wood, the wood I had just totally snapped in half with one shot.....so I fixed it and make a ghetto frame just for the lady!!!
Yeah, pistol bullets just punch a clean hole through soft pine (unless they hit a knot!).
Title: Re: Kokohead: Pistol range
Post by: Jl808 on July 05, 2013, 01:23:30 PM

During one visit I notice there was some pounding going on at the base area.

Do you need to bring "wedges" to keep the pistol target firmly secured?

I used to do that until I got tired of getting wood splinters on my fingers.

I bought 2 el-cheapo spring clamps from Home Depot and clamp my frame to the target stand so it doesn't fall down.

(http://img.tapatalk.com/d/13/07/06/ade2a4an.jpg)