2aHawaii
General Topics => Off Topic => Topic started by: eyeeatingfish on March 14, 2016, 03:28:14 PM
-
Looking for a local supplier who carries hard bullet resistant material. Not like soft body armor but hard sheet/panels.
Thanks
-
What are you trying to stop, pistol, rifle calibers of each? What are you trying to armor, size, permanent, temporary, movable or fixed? Your initial query is very vague.
-
5.56 at a minimum would be nice. It is going to depend on what the supplier has and how much it weighs. I am planning to make a ballistic shield, the type you can carry around. Thus steel is not practical. The fiberglass stuff is heavy too but not as bad.
-
(http://ep.yimg.com/ay/yhst-50863389838911/american-liquid-metal-crusader-shield-sign-14.gif)
protect you from 5.56 fired from Saracens
-
Put a nice infidel sticker on the front?
-
What are th shields swat uses made from? I would think a shield would be heavy. Carrying plates in a vest is heavy enough, but at least your hands are free. What is the main purpose of the shield?
-
What are th shields swat uses made from? I would think a shield would be heavy. Carrying plates in a vest is heavy enough, but at least your hands are free. What is the main purpose of the shield?
thats when you call the cavalry
(http://i.ebayimg.com/00/s/NTAwWDUwMA==/z/MJkAAOSwHjNV9jjU/$_35.JPG)
-
EEF I doubt you could do it cheap and I doubt you could do it easily. To get rifle protection you'd need an over abundance of soft armor or a hard armor of some type. I'd look for a commercial off the shelf product vs. DIY. I searched bullet proof shield and got an interesting assortment of returns.
-
5.56 at a minimum would be nice.
What type of 5.56 do you wish to stop? What is your budget?
-
I have often wondered what happened to all the "bullet bouncers" we wore in SVN. Heavy as hell, front and back form fitting plates with velcro to tie together. Doubt they still use that stuff today.
Were said to be able to stop the 12.7mm stuff. Not bad just standing behind a gun, but you would not want to move around fast much wearing them.
-
contact these guys
http://www.fabtekengineering.com/ (http://www.fabtekengineering.com/)
maybe they can make a necklace for you to wear this
(http://storage.googleapis.com/wzukusers/user-17326413/images/565d28fda899cNG6WSuu/IMG_4519_d1000.JPG)
just don't walk downrange at Kokohead
-
here you go. :shaka:
https://www.botach.com/hardwire/
i no longer support them for their awful customer service and general business practices, but if they actually have it in stock(their live inventory means nothing) then you will probably get a decent deal including shipping.
on a side note, every classroom should have one of these:
https://www.botach.com/hardwire-20x40-level-iiia-large-bulletproof-whiteboard/
(https://cdn1.bigcommerce.com/server4300/9j9zreeu/products/28453/images/40288/20X40__54212.1384108410.1280.1280.jpg?c=2)
-
contact these guys
http://www.fabtekengineering.com/ (http://www.fabtekengineering.com/)
maybe they can make a necklace for you to wear this
(http://storage.googleapis.com/wzukusers/user-17326413/images/565d28fda899cNG6WSuu/IMG_4519_d1000.JPG)
just don't walk downrange at Kokohead
just hang the gong from your belt buckle
lucky for me, i can save money by purchasing the smallest gong fabtek makes
-
EEF I doubt you could do it cheap and I doubt you could do it easily. To get rifle protection you'd need an over abundance of soft armor or a hard armor of some type. I'd look for a commercial off the shelf product vs. DIY. I searched bullet proof shield and got an interesting assortment of returns.
Problem is that they seem to run about $1000 and up.
I am oddly frugal, I like to make things instead of buying them if possible.
-
Check with Prime Sports HI at the gunshow. They supposed to be a AR500 dealer in Hawaii. The steel plates are reasonable compared to ceramics and other exotic materials.
-
this is an odd project.
I think you'd be better off with plates and a carrier from companies that have the resources and know-how to make armor.
You don't want to gamble your life on something home brewed. This is one area you don't want to be frugal.
-
Mythbusters did an episode on bullet proofing a vehicle using telephone books. You should go look up the results.
I would go with commercial made over DIY
-
Problem is that they seem to run about $1000 and up.
I am oddly frugal, I like to make things instead of buying them if possible.
To stop 5.56, especially certain types of 5.56, your project will either be extremely heavy for its application or grossly expensive as a DIY.
-
What are th shields swat uses made from?
The standard hand held shields are not usually for 5.56.
-
(https://cdn1.bigcommerce.com/server4300/9j9zreeu/products/28453/images/40288/20X40__54212.1384108410.1280.1280.jpg?c=2)
Will not stop 5.56.
-
on a side note, every classroom should have one of these:
https://www.botach.com/hardwire-20x40-level-iiia-large-bulletproof-whiteboard/
(https://cdn1.bigcommerce.com/server4300/9j9zreeu/products/28453/images/40288/20X40__54212.1384108410.1280.1280.jpg?c=2)
Write some quadratic equation on it to confuse attackers.
-
The standard hand held shields are not usually for 5.56.
I was thinking that. You can order the fiberglass material in different ratings at different thicknesses. The weight will also depend on how large the shield as well. Haven't calculated the weights depending on the size and rating yet. Was really just looking for the vendor is all.
-
I was thinking that. You can order the fiberglass material in different ratings at different thicknesses. The weight will also depend on how large the shield as well. Haven't calculated the weights depending on the size and rating yet. Was really just looking for the vendor is all.
I am not saying one does not exist but I know of no vendor in Hawaii that sells what you are looking for. There are vendors for armor, but the base materials, I am unaware. For a minimum of level III for 5.56, you will need quality advanced composites to keep the weight manageable, so you are often looking at an alumina aramid or similar. It is a big step from level IIIA to III. There are some pretty amazing products being put out now in rifle rated body armor and ballistic shields that are lightweight, but trade-off is always cost and often multi-hit capability may suffer depending on construction and materials. To produce a quality one off DIY item may not be cost effective, unless if money is not an issue.
-
Will not stop 5.56.
true but much more than half the attacks are with pistols and shotguns so it would help in those cases.
i doubt most teachers could even hold up a shield strong enough to stop 5.56 let alone maneuver it
p.s. i have the zt0801 box in my trunk still. i believe i saw you at the range once but wasnt sure if it was you.
-
true but much more than half the attacks are with pistols and shotguns so it would help in those cases.
i doubt most teachers could even hold up a shield strong enough to stop 5.56 let alone maneuver it
p.s. i have the zt0801 box in my trunk still. i believe i saw you at the range once but wasnt sure if it was you.
You're correct on the shield, however he had asked for ballistic coverage up to a 5.56 which changes the game quite a bit. There are Level III and Level IV shields. Protech and Paraclete make shields that are under 30lbs. Usually the lights, handle, rechargeable battery and window on many shields can add a good bit of heft.
Kinda forgot about the box, but will get with you for it. I will be heading out of town again for a bit, so will shoot for when I get back. If you see me or my car on the lower side, by all means come by, or shoot me a text to confirm. ;)
-
You're correct on the shield, however he had asked for ballistic coverage up to a 5.56 which changes the game quite a bit. There are Level III and Level IV shields. Protech and Paraclete make shields that are under 30lbs. Usually the lights, handle, rechargeable battery and window on many shields can add a good bit of heft.
Kinda forgot about the box, but will get with you for it. I will be heading out of town again for a bit, so will shoot for when I get back. If you see me or my car on the lower side, by all means come by, or shoot me a text to confirm. ;)
I am a big guy, I think I could handle 30lbs alright. I will try to check out those brands too. Problem is that I cannot afford to spend $1000 bucks on a shield.
I would like a FLIR system too but building that is way out of my expertise ;)
-
I am a big guy, I think I could handle 30lbs alright. I will try to check out those brands too. Problem is that I cannot afford to spend $1000 bucks on a shield.
I would like a FLIR system too but building that is way out of my expertise ;)
30 lbs would be a lightweight shield. Those shield manufacturers are tops, but a no frills, no window, IIIA only shield is $1k. They can be a good 10lbs lighter without the window, lights etc... There is a huge step up in difference in pricing when you go from IIIA to level III. 2.5x or triple that cost for a lightweight level III shield, but again that includes view port, handles, lights etc... I have rifle plates from both of those manufacturers and $1K is the entry price for a pair. Of course AR500 plates are cheaper but a full AR500 shield would be a bear.
FLIR is great if you have the cash like you said, but there are pretty good NV set ups that won't kill you in cost.
-
30 lbs would be a lightweight shield. Those shield manufacturers are tops, but a no frills, no window, IIIA only shield is $1k. They can be a good 10lbs lighter without the window, lights etc... There is a huge step up in difference in pricing when you go from IIIA to level III. 2.5x or triple that cost for a lightweight level III shield, but again that includes view port, handles, lights etc... I have rifle plates from both of those manufacturers and $1K is the entry price for a pair. Of course AR500 plates are cheaper but a full AR500 shield would be a bear.
FLIR is great if you have the cash like you said, but there are pretty good NV set ups that won't kill you in cost.
The steel plates with spall coating are about 9 lbs each IIRC and they are a little over a square foot. 4 square feet would be about 40lbs then. Maybe I should call Spartan armor to see if they could make something and what it would weigh. I am sure they could suggest alternatives too.
The Gen 1 NV goggles are between $100 and $200 for some of them, but they all seem to be zoomed ones, nothing great for actually walking around. At least the one I tried from a friend was very limited in what you could see.