2aHawaii
General Topics => General Discussion => Topic started by: changemyoil66 on November 04, 2016, 01:38:33 PM
-
Hi guys,
Thinking of making a stand for Kokohead. I have the dimensions from their site, but was wondering if people could post a pic of what the stand should look like. I'm a visual person.
I currently shoot at Honolulu Firearms but want to shoot at more than 15 yards.
-
Hi guys,
Thinking of making a stand for Kokohead. I have the dimensions from their site, but was wondering if people could post a pic of what the stand should look like. I'm a visual person.
I currently shoot at Honolulu Firearms but want to shoot at more than 15 yards.
the easiest way is to clamp an election sign to 2 1x2s
:shake:
-
(http://blog.joehuffman.org/content/binary/ChineseTargetStand.jpg)
-
the easiest way is to clamp an Hilly election sign to 2 1x2s
:shake:
-
(http://i1000.photobucket.com/albums/af127/heaviescc/20160822_002324_zps9yzsyyqo.jpg) (http://s1000.photobucket.com/user/heaviescc/media/20160822_002324_zps9yzsyyqo.jpg.html)
Cut 2x2s and screw or nail them together. Legs should be 12 1/2" on center
-
If you don't have much space in your home or car, you can make a "folding" frame. Drill holes and use bolt/nuts to secure the cross pieces. Loosen the nuts and it "collapses" sideways
Side benefit - if the post holes at the range are a little too close together (or if your stand is slightly too wide), you can make the stand a little narrower....one post will be slightly higher and cross piece won't be perfectly perpendicular (like a parallelogram). I staple the cardboard after installing the stand
-
Another typical rifle frame for KHSC.
Note bevel corners where the wood goes into the pipes in the ground