2aHawaii
Tools and Uses => Reloading => Topic started by: Rocky on November 12, 2016, 08:14:00 PM
-
Finally got a chrono.
The first one is warm up the barrel and zero with Stock 150 gr Rem
-
Finally got a chrono.
The first one is warm up the barrel and zero with Stock 150 gr Rem
nice!
can't wait to see the results with the other "heads":
-
Nice going :thumbsup:
-
44.7 grains of XBR with 155 grain SMK palma, 155 grain TMK, or 155 grain Hornady AMAX
Work up to it, this load is warm
-
Nice going :thumbsup:
Many thanks to you ! :worship:
-
44.7 grains of XBR with 155 grain SMK palma, 155 grain TMK, or 155 grain Hornady AMAX
Work up to it, this load is warm
Thanks.
First time with the Chrono so I screwed up not hitting the "start" button a couple times ere go not all 5 rounds of each set counted. :oops:
Also forgot to post "warm up velocity's which were interesting.
2698, 2719, 2785, 2780, 2869.
Proof that you should "warm up " that barrel and get a little carbon in the grooves ( "Get little carbon in the grooves" COPYRIGHT :rofl: )
Still working with the 4 powders I already have. IMR 14064, Ramshot TAC, CFE 223 and Reloader 15
Available bullets are Hornady 150 FMJ BT, Nosler 150 B-Tip, HPBT, Sierra MK 168, Nosler 180 B-Tip, Nosler 190 B-Tip, Sierra HPBT 190
It's kind funny that all I've read says the 155 gr at around 2600 FPS was best yet that's not the results we got. :wacko:
I shot #5 in bulls eye on target #1 and all 5 rounds on target #4, the rest were by my 0600, Rockette :love:
-
Thanks.
First time with the Chrono so I screwed up not hitting the "start" button a couple times ere go not all 5 rounds of each set counted. :oops:
Rocky what kind of chrono did you get?
-
Thanks.
First time with the Chrono so I screwed up not hitting the "start" button a couple times ere go not all 5 rounds of each set counted. :oops:
Also forgot to post "warm up velocity's which were interesting.
2698, 2719, 2785, 2780, 2869.
Proof that you should "warm up " that barrel and get a little carbon in the grooves ( "Get little carbon in the grooves" COPYRIGHT :rofl: )
Still working with the 4 powders I already have. IMR 1064, Ramshot TAC, CFE 223 and Reloader 15
Available bullets are Hornady 150 FMJ BT, Nosler 150 B-Tip, HPBT, Sierra MK 168, Nosler 180 B-Tip, Nosler 190 B-Tip, Sierra HPBT 190
It's kind funny that all I've read says the 155 gr at around 2600 FPS was best yet that's not the results we got. :wacko:
I shot #5 in bulls eye on target #1 and all 5 rounds on target #4, the rest were by my 0600, Rockette :love:
:thumbsup:
Get the 168 smks up around 2600 2650 with the RL15 (24"bbl). That should get you some good results. 150-155s can go faster.
The other powders might be a touch too fast for .308 to work efficiently. You'll get pressure before you reach optimal velocity. RL15 is some folks go to powder for .308.
Watch your pressure signs and work up.
-
What length barrel?
-
Rocky what kind of chrono did you get?
Caldwell Ballistic Precision Premium Chronograph Kit with all the goodies :D
-
:thumbsup:
Get the 168 smks up around 2600 2650 with the RL15 (24"bbl). That should get you some good results. 150-155s can go faster.
FROM ALLIANT
308 Win. Speer 150 gr SP IMI 2.7 22 CCI 200 Reloder 15 49gr 2,919
308 Win. Speer 168 gr BTHP IMI 2.8 24 CCI 200 Reloder 15 45gr 2,710
My last test showed the 168 Sierra HTBT MK averaging around 2,400 with TAC and IMR4064 to be pretty sweet.
Going to try and get out to 200yds with 168 and 180gr
308 Win. Speer 180 gr SP IMI 2.8 24 CCI 200 Reloder 15 45 2,613
but next try out will be all Reloader 15
The other powders might be a touch too fast for .308 to work efficiently. You'll get pressure before you reach optimal velocity. RL15 is some folks go to powder for .308.
Watch your pressure signs and work up.
Barrel is a fluted 5R 24", 11.25 twist
-
Barrel is a fluted 5R 24", 11.25 twist
Yea, that is perfect. You should be able to get the 168's to about that velocity. Start at mag length, if you load from the mag, best three round group around the 26-2650 velocity, then seat deeper in increments of about .005" till they all touch. Shoot a 10 round confirmation group of the load. If all ten are less than MOA, then you got a winner.
A .308 rifle should shoot 168 Federal Gold Medal Match very well. The RL15 168 combo should be close to a clone load. Those will do very well out to 600 yards with some wind reading.
You'll get much better ES and SD from the RL-15
IMHO, 180 is too heavy for .308 unless you really push them hard and for some special purpose. Extra recoil might not be worth it.
Are you making hunting rounds?
Also noticed you had put 4064 in the pic, IMR 4064 is a good choice too..
-
Yea, that is perfect. You should be able to get the 168's to about that velocity. Start at mag length, if you load from the mag, best three round group around the 26-2650 velocity, then seat deeper in increments of about .005" till they all touch. Shoot a 10 round confirmation group of the load. If all ten are less than MOA, then you got a winner.
A .308 rifle should shoot 168 Federal Gold Medal Match very well. The RL15 168 combo should be close to a clone load. Those will do very well out to 600 yards with some wind reading.
You'll get much better ES and SD from the RL-15
IMHO, 180 is too heavy for .308 unless you really push them hard and for some special purpose. Extra recoil might not be worth it.
Are you making hunting rounds?
Also noticed you had put 4064 in the pic, IMR 4064 is a good choice too..
She's not a hunter (yet), just an aspiring distance shooter. ;)
Mind you, she probably has under 200 rounds on what is her first real long distance rifle, even though she does own an AR and in my opinion is doing very well. :o
I had to work her out of 150's and up to the 168 recoil and the 180gr is just to show her how a heavier bullet works.
(Hope to try out to 600+ at Pualoa)
We are both relatively "new" to reloading and received much knowledge for OldFart. :wave: :worship:
I do the math, stats, instruction, demonstration and monitor loading, and she enjoys the actual loading part.
It's a fun teamwork thingy and as long as it keeps my woman interested in firearms, it's all good. :love: :thumbsup:
Thanks for the info, we'll keep ya'll posted. :shaka:
-
Awesome you folks will do well!
-
If I remember correctly M118LR is about 43.0 IMR 4064 under a 175 SMK.
Look forward to seeing you this weekend.
I'll be shooting 80s at 600. Cheaper than shooting 308s. :D
You guessed it I'm Chinese ;D
-
If I remember correctly M118LR is about 43.0 IMR 4064 under a 175 SMK.
Look forward to seeing you this weekend.
I'll be shooting 80s at 600. Cheaper than shooting 308s. :D
You guessed it I'm Chinese ;D
closest I found was.....
Cartridge, Caliber 7.62mm Special Ball, Long Range, MK 316 MOD 0 (United States): A 175-grain (11.3 g) round specifically designed for long-range sniping consisting of Sierra MatchKing Hollow Point Boat Tail projectiles, Federal Cartridge Company match cartridge cases and Gold Medal Match primers. The Propellant has been verified as IMR 4064 (per NSN 1305-01-567-6944 and Federal Cartridge Company Contract/Order Number N0016408DJN28 and has a charge weight per the specs of 41.745-grain (2.7 g).[19]
-
Rocky,
I don't reload for this particular round but I just want to say that your results have inspired me to get a chronograph finally. I have sorely needed one for a very long time. Thanks! :thumbsup: :thumbsup: :thumbsup:
-
This outing was a bit more difficult as we had a couple of shooters.
The 15 - 20 mph gusting wind probably threw things off a bit too. :shake:
Been working on ogive which is interesting. Our stats are....
Sierra HPBT MK 168
Avg COAL 2.813-2.825 Avg Ogive 3.275
Max COAL 2.872 Max Ogive 3.385
We are taking pretty good records of all loads like Ogive and COAL, not just powder, loads, cases, primers etc.... :crazy:
The chrono failed giving errors on the best grouping. :grrr:
I think this may have had something to do with shooting at the upper target as that was the highest set of rounds.
These last three sets came after the wind had died down a bit
168 gr SHPBT w/ 46.6 gr CFE 223 came in 2nd.
168 gr w/ 42 gr IMR 4064 had the best grouping
Both had COAL 2.829 and 3.375 ogive. ;D
The factory Rem 150's were shot last
The large target w/ more holes started as warm up target.
Glad I made you spend money Inspector :rofl: :rofl: :wave:
-
Nice work!
On the Chrono.. if it is an optical, then changing light conditions, wind, muzzle blast from obnoxious muzzle breaks can skew readings and give errors.
That was the main reason I purchased a Magneto Speed and gave up on my optical. It has been an awesome device and gives more accurate data, and less errors. It does, however, limit it's use to rifles who's barrels can fit the "bayonet".
I did a review on it somewhere on this site and accurateshooter.com
I really am tempted to get one of those radar chronos, but @ $500+...... don't think it'll be worth an investment at this time.
-
Nice work!
On the Chrono.. if it is an optical, then changing light conditions, wind, muzzle blast from obnoxious muzzle breaks can skew readings and give errors.
That was the main reason I purchased a Magneto Speed and gave up on my optical. It has been an awesome device and gives more accurate data, and less errors. It does, however, limit it's use to rifles who's barrels can fit the "bayonet".
I did a review on it somewhere on this site and accurateshooter.com
I really am tempted to get one of those radar chronos, but @ $500+...... don't think it'll be worth an investment at this time.
Yeah, for $500, I'll buy another gun and race bullets. :rofl:
I bought this on a whim when I saw it as I "needed" one :crazy: and the price was right.
Had I known about the bayonet type, I might have went that route, seems like less set up.
Once I get my "perfect loads" I'll have no need for it and it will be seen posted here in the classifieds. :D
It was windy but less when error(s) occurred and muzzle with break was at least 10-15 ft away from chrono.
I think the error occurred first and second shooting events around the same time of day (1700), so I was thinking it was more lighting conditions ( angle).
I have an IR LED Light Kit but I haven't tried it yet. :sleeping:
That may solve the lighting issue.
I think we are getting plenty of info tho and learning a lot about reloading with it. :geekdanc:
-
My understanding is that a good powder/bullet combo will have Stdev in the teens or less as a measurement of consistency.
-
My understanding is that a good powder/bullet combo will have Stdev in the teens or less as a measurement of consistency.
Just matters what you are going to use the ammunition for. At 100 200 yards SD won't matter much, but at longer ranges ES/SD will show vertical dispersion, which may be greater than an acceptable hit on the target.
100 yards all that would matter is a small group size.