2aHawaii

Tools and Uses => Reloading => Topic started by: G35soldier on April 03, 2017, 11:20:15 PM

Title: Pulling 7.62x39
Post by: G35soldier on April 03, 2017, 11:20:15 PM
What pullers are you guys using. Have about 100 rounds I need to pull harvesting the powder :shaka:
Title: Re: Pulling 7.62x39
Post by: suka on April 04, 2017, 12:20:21 AM
(http://www.armadapontica.com/shop/userfiles/productlargeimages/product_476.jpg)
Title: Re: Pulling 7.62x39
Post by: Inspector on April 04, 2017, 04:43:22 AM
What pullers are you guys using. Have about 100 rounds I need to pull harvesting the powder :shaka:
I have the RCBS Collet Puller and while it works well and doesn't mar the bullet (as long as you use the correct size collet) it is not as fast as I would like it to be. With that said I watched a video with one of my favorite reloaders and he used the Hornady collet puller and it worked much smoother and quicker than the RCBS. It didn't seem to mar the bullet either. The old kinetic bullet puller works well but will take a little longer.
Title: Re: Pulling 7.62x39
Post by: macsak on April 04, 2017, 05:29:09 AM
I have the RCBS Collet Puller and while it works well and doesn't mar the bullet (as long as you use the correct size collet) it is not as fast as I would like it to be. With that said I watched a video with one of my favorite reloaders and he used the Hornady collet puller and it worked much smoother and quicker than the RCBS. It didn't seem to mar the bullet either. The old kinetic bullet puller works well but will take a little longer.

the thing i don't like about the kinetic puller is that it makes a mess of the powder since it isn't completely sealed at the top
powder gets all over the floor and you, also meaning you don't get to retain a bit of the powder
Title: Re: Pulling 7.62x39
Post by: Inspector on April 04, 2017, 06:25:20 AM
the thing i don't like about the kinetic puller is that it makes a mess of the powder since it isn't completely sealed at the top
powder gets all over the floor and you, also meaning you don't get to retain a bit of the powder
I don't have those issues at all unless I bang em after the herd is already dislodged.

Herds
Title: Re: Pulling 7.62x39
Post by: Lihikai on April 04, 2017, 06:37:48 AM
I use the Hornady collet puller and it works great.  Sometimes milsurp ammo has a sealant which makes the head difficult to pull.  In this case you can run the rounds thru your seating die first to break the seal
Title: Re: Pulling 7.62x39
Post by: Kalen on April 04, 2017, 09:40:26 AM
I use the Hornady collet puller and it works great.  Sometimes milsurp ammo has a sealant which makes the head difficult to pull.  In this case you can run the rounds thru your seating die first to break the seal

Never thought of that, great idea.. I've tossed some mis seated/crimped rounds because my FA kinetic hammer is just a pain to use, especially with a crimped bullet.
Title: Re: Pulling 7.62x39
Post by: macsak on April 04, 2017, 09:47:52 AM
I don't have those issues at all unless I bang em after the herd is already dislodged.

Herds

i guess i'm whacking too much after the head comes off
 >:D
Title: Re: Pulling 7.62x39
Post by: G35soldier on April 05, 2017, 12:41:49 PM
Thanks for the replies. Ordered the Hornady one