2aHawaii
General Topics => General Discussion => Topic started by: drck1000 on April 25, 2017, 10:46:29 AM
-
What are your preferences and/or opinions towards ambidextrous firearm features?
Features that come to mind are:
- Charging handles (particularly for AR)
- Paddle/Flipper type mag release for handguns (HK, some Walther, etc)
- Safety or Fire Selectors
I've been wanting to try out ambi charging handles for my AR recently. That said, I've gotten so used to my ARs having the "latch" only on the left side of the gun.
Some features like for the ambi mag release for handguns I believe work well, but I am just so used to the left side push button mag release. My first gun was an HK and it has the ambi mag release. I do like it and believe that it's a good feature, but since that time, the rest of my guns are all the left side push button mag release.
One school of thought is whatever feature that makes the gun easier (faster, less reach, etc) to use is beneficial. Another is keeping the gun pretty close to stock and learn how to manipulate it that way. Then you won't be dependent in having guns set up exactly like how your personal gun is.
Anyways, what are your preferences or opinions on ambi features? Both in OEM form or aftermarket products.
-
The 2 most useful AR add-ons I have are the ambi safety selector, and the Magpul B.A.D. lever.
The B.A.D. lever is less awkward than having to move my left hand from the forward position on the hand guard to the bolt release paddle, or reaching around the rifle with my right to press it. A slight press on the B.A.D. with my right index is much quicker and easier.
I know some prefer to use the charging handle for all functions having to do with the bolt, but that's more hand and arm motion than is necessary to simply release the bolt..
-
I used to have a B.A.D. Lever on mine, but as quirky as it sounds, I took it off simply for the fact that should I need to use another rifle that isn’t mine in a SHTF scenario or any scenario really, I wouldn’t have muscle memory temptation to expect a BAD Lever there or any overly customizable add on.
I did opt for a AXTS Raptor Ambi charging handle, just in case I needed to shoot with my off hand and didn’t want to remove my off hand off the pistol grip if I needed to reload with a closed bolt.
-
Practice, practice, practice.
-
Practice, practice, practice.
No matter how much I practice, Carnegie Hall refuses to let me in with my AR-15!
-
The 2 most useful AR add-ons I have are the ambi safety selector, and the Magpul B.A.D. lever.
The B.A.D. lever is less awkward than having to move my left hand from the forward position on the hand guard to the bolt release paddle, or reaching around the rifle with my right to press it. A slight press on the B.A.D. with my right index is much quicker and easier.
I know some prefer to use the charging handle for all functions having to do with the bolt, but that's more hand and arm motion than is necessary to simply release the bolt..
I used to have a B.A.D. Lever on mine, but as quirky as it sounds, I took it off simply for the fact that should I need to use another rifle that isn’t mine in a SHTF scenario or any scenario really, I wouldn’t have muscle memory temptation to expect a BAD Lever there or any overly customizable add on.
I did opt for a AXTS Raptor Ambi charging handle, just in case I needed to shoot with my off hand and didn’t want to remove my off hand off the pistol grip if I needed to reload with a closed bolt.
The battery assist device/lever is one that I've never really considered. I've shot friends' guns with them and I can see how they would be useful for stuff like reloads and malfunction clearance where you need to lock the bolt back. That said, I've seen a lot of guns with them malfunction with those things. Not only the Magpul versions, but the Phase 5, Troy and another. Some were admittedly "user error" as they found they were hitting the lever when doing certain things. This is mostly in a shooting class context and not really from the bench. One guy was putting his index finger on the lever while he tilted/raised the gun up to load a new mag. So when he went to push the lever, the bolt was already forward. In another class, another two guns were malfunctioning. While we couldn't pinpoint that it was the device or how the device was causing anything, once the levers were removed, the guns seemed to have fun fine. These were personal guns and one was an airman and another a solider, both active duty in Alaska.
I've also heard numerous reports of the lever causing malfunctions, so I generally stayed away.
In general, I tend to keep my guns pretty close to stock. A part of that is not having (or more frankly finding the time) time to tinker and mod my guns. I'd like to eventually do stuff like stipple grips and such, but just haven't done so. As far as ambi, I really wouldn't mind trying those features out (speaking of aftermarket items), but just haven't done so.
-
Practice, practice, practice.
So what are your preferences or opinions about ambi features?
Yeah, one would need to practice with whatever they choose to go with, but I assume that you have tried many of those features for yourself.
-
You should instead buy a left handed AR, they sell it with the left handed screw drivers.
-
You should instead buy a left handed AR, they sell it with the left handed screw drivers.
One of my best friends is a lefty. I gotta mention the left handed screw drivers to him. :rofl:
Seriously though, guns are generally made/designed for right handers. I do spend time shooting both sides and for some gun and some manipulations, doing it lefty does take more time, thought, effort, etc. It can be done, but things are easier with ambi features. Like a 1911 or other handgun with an ambi safety.
Some guns are just fine shot lefty, like ARs. I actually have never seen a lefty AR, like the Stag ones. But try shooting guns like a Steyr lefty. . .
-
My wife is a lefty, thats why we got a vp9. But now she wants a revolver *facepalm
Sent from my SM-G920V using Tapatalk
-
My wife is a lefty, thats why we got a vp9. But now she wants a revolver *facepalm
Sent from my SM-G920V using Tapatalk
Gotcha.
I waited until the PPQ M2 came out to try that one since it has the left side button mag release. The VP9 is one gun that I would consider buying with the ambi-paddle mag release. I've shot it and it's a solid gun for sure, but those paddles really mess me up. Even when shooting at the pistol range, I find myself having to at least think my way around the gun.
Why does the wifey want a revolver? Does she have trouble working the slide? Or just something she wants? Not that a reason is needed for her wanting anything. Haha
-
Gotcha.
I waited until the PPQ M2 came out to try that one since it has the left side button mag release. The VP9 is one gun that I would consider buying with the ambi-paddle mag release. I've shot it and it's a solid gun for sure, but those paddles really mess me up. Even when shooting at the pistol range, I find myself having to at least think my way around the gun.
Why does the wifey want a revolver? Does she have trouble working the slide? Or just something she wants? Not that a reason is needed for her wanting anything. Haha
Since the VP is my only pistol, so I'm used to the lever. I use my thumb to release the mag, not my middle finger. I find that using the thumb, I keep a tighter grip on the pistol.
She wants a revolver because:
1) She always wanted one
2) She does have trouble racking the slide. She refuses to practice dry firing at home during commercials. (Never listens to me). I told her at 1st, I had problems too, but now it's easy. But stil...
-
Since the VP is my only pistol, so I'm used to the lever. I use my thumb to release the mag, not my middle finger. I find that using the thumb, I keep a tighter grip on the pistol.
She wants a revolver because:
1) She always wanted one
2) She does have trouble racking the slide. She refuses to practice dry firing at home during commercials. (Never listens to me). I told her at 1st, I had problems too, but now it's easy. But stil...
For my HK, I can't reach the paddle with my thumb. Maybe I could if I twisted the gun almost 90 degrees in my hand. So I use my middle finger. Same with the slide stop. I use my support hand thumb to send the slide forward.
1) Good reason. A big part of why I got a revolver. That and to round out the guns for teaching basic pistol courses.
2) Racking the slide thing is pretty common and a revolver involved more coordination than strength. The loading, or even reloading, is always interesting for lefties since they need to transfer hands. I can't think of a good way to load or reload with the gun in the left hand. I've also worked with some older folks that didn't have the hand strength to rack the slide on anything more than a 22 pistol. In many cases, they shot revolvers great!
-
I twist my wrist about half inch which allows my thumb to hit the lever.
-
Have a carbine course coming up, so decided to try an ambi charging handle. Ordered the Geiselle ACH and going to give it a shot.
I debating trying and ambi safety, but never really noticed it being an issue with the standard safety, so decided against trying it. At least for now.
-
Have a carbine course coming up, so decided to try an ambi charging handle. Ordered the Geiselle ACH and going to give it a shot.
I debating trying and ambi safety, but never really noticed it being an issue with the standard safety, so decided against trying it. At least for now.
As a righty, I prefer my wifes ambi safety on the AR. Take off safe with thumb (left side), and put back on with index finger (right side). This way it adds a layer of safety because your index finger is off the trigger. But after installing the ambi safety, she doesn't use it anyways and still uses the regular (left side). *facepalm.
Check out the CZ P10C. It's a "true" ambi mag/slide release. But the P10F won't be. And it's not really a compact. Just 1/4 inch shorter than VP9. The full size will be 1/4 inch longer than VP9.
But in the end I tell her to get used to righty controls. Because if you have to pick up a gun off the ground and it's not set up ambi, it will take that much longer to forget muscle memory.
-
As a righty, I prefer my wifes ambi safety on the AR. Take off safe with thumb (left side), and put back on with index finger (right side). This way it adds a layer of safety because your index finger is off the trigger. But after installing the ambi safety, she doesn't use it anyways and still uses the regular (left side). *facepalm.
Check out the CZ P10C. It's a "true" ambi mag/slide release. But the P10F won't be. And it's not really a compact. Just 1/4 inch shorter than VP9. The full size will be 1/4 inch longer than VP9.
But in the end I tell her to get used to righty controls. Because if you have to pick up a gun off the ground and it's not set up ambi, it will take that much longer to forget muscle memory.
Haha. Women. . .
In general, I tend to just use the guns how they are designed and tend to stay closer to stock as to try to not get dependent upon add-ons. Somewhat the same reasoning you're trying to get your wife to get used to righty controls. That said, I am still interested in trying some ambi-features and the charging handle was first and then safety to a lesser extent. I'm used to using the "standard" safety, but always interested if there's a better way. I guess for the charging handle and even safety, the other side can be there if you want to try it, but won't hurt anything if you don't use it. There's also the aspect of if I end up liking the ambi feature, I'll have to do the same for other of my guns.
-
Haha. Women. . .
In general, I tend to just use the guns how they are designed and tend to stay closer to stock as to try to not get dependent upon add-ons. Somewhat the same reasoning you're trying to get your wife to get used to righty controls. That said, I am still interested in trying some ambi-features and the charging handle was first and then safety to a lesser extent. I'm used to using the "standard" safety, but always interested if there's a better way. I guess for the charging handle and even safety, the other side can be there if you want to try it, but won't hurt anything if you don't use it. There's also the aspect of if I end up liking the ambi feature, I'll have to do the same for other of my guns.
Ambi safety selector is a cheap addon, only $45. Is it necessary? Absolutely not. Does it help with weak-hand manipulations easier? Yes. I'd argue that an ambi safety is more helpful than an ambi charging handle but this is America, get both!!
-
Haha. Women. . .
In general, I tend to just use the guns how they are designed and tend to stay closer to stock as to try to not get dependent upon add-ons. Somewhat the same reasoning you're trying to get your wife to get used to righty controls. That said, I am still interested in trying some ambi-features and the charging handle was first and then safety to a lesser extent. I'm used to using the "standard" safety, but always interested if there's a better way. I guess for the charging handle and even safety, the other side can be there if you want to try it, but won't hurt anything if you don't use it. There's also the aspect of if I end up liking the ambi feature, I'll have to do the same for other of my guns.
I was looking at the Geiselle SSH, not for it's ambi feature, but for its solid metal. The stock one seems flimbsy when you grab by 1 side. I feel the metal twist slightly.
My wife has an ambi charging handle that when you use 2 fingers, it doesn't work as well. It works best when grabbing from 1 side only (left or right). IDK if all ambi handles are like this, but this is now the reason why I grab from the left side only on my stock charging handle. Because if I do have to pick up an AR that's been modified, using the 2 fingers may cause a delay. But 1 side will work more often.
-
Ambi safety selector is a cheap addon, only $45. Is it necessary? Absolutely not. Does it help with weak-hand manipulations easier? Yes. I'd argue that an ambi safety is more helpful than an ambi charging handle but this is America, get both!!
Pain in the ass to install. I had to re-install the ELF trigger due to having a defect in the 1st one. Then she bought the ambi safety 2 days later and had to move the trigger slightly (had to basically remove both pins, so it's like installing all over). Only to find out she doesn't use it when we took the HDF carbine class. Hence the *facepalm.
-
Pain in the ass to install. I had to re-install the ELF trigger due to having a defect in the 1st one. Then she bought the ambi safety 2 days later and had to move the trigger slightly (had to basically remove both pins, so it's like installing all over). Only to find out she doesn't use it when we took the HDF carbine class. Hence the *facepalm.
You don't need to take the trigger out to replace the safety selector. Isn't the ELF a drop in?? Doesn't get easier than that.
-
Ambi safety selector is a cheap addon, only $45. Is it necessary? Absolutely not. Does it help with weak-hand manipulations easier? Yes. I'd argue that an ambi safety is more helpful than an ambi charging handle but this is America, get both!!
I wouldn't think any add-on is necessary unless you have a requirement the original rifle wasn't able to satisfy. I personally think the ambi safety selector is great, and everyone should have one. It puts control at the hand on the rear pistol grip. Without it, you either have to take your trigger hand off the rifle, switch the safety, then replace it again, or use the support hand, which requires you to possibly lose position if already on target.
Aim, safety off, fire -- much better than aim, move hand to safety, safety off, return hand to proper spot, aim again, fire.
-
Ambi safety selector is a cheap addon, only $45. Is it necessary? Absolutely not. Does it help with weak-hand manipulations easier? Yes. I'd argue that an ambi safety is more helpful than an ambi charging handle but this is America, get both!!
Awesome! SKD has a sale going on right. Add like three ambi safety selectors to your order and I'll get them from you in a couple of weeks! Thanks man! :thumbsup:
For ambi charging handle or safety selector, I never really tried with either, so dunno myself. Which is kinda the point here. I think I've shot guns with ambi safety, but don't really recall it being something that I really wanted, but I wasn't also giving it a fair shake.
-
Pain in the ass to install. I had to re-install the ELF trigger due to having a defect in the 1st one. Then she bought the ambi safety 2 days later and had to move the trigger slightly (had to basically remove both pins, so it's like installing all over). Only to find out she doesn't use it when we took the HDF carbine class. Hence the *facepalm.
Another reason I tend to stick to closer to stock. Start messing with things and occasionally you get unintended consequences. Like when I first added a grip plug on my Glock. Well, the fit made it such that the mags wouldn't drop free. But awesome on you both for trying and finding out if they work by shooting them, even though for your wife, it sounds like she didn't really. . .
-
I wouldn't think any add-on is necessary unless you have a requirement the original rifle wasn't able to satisfy. I personally think the ambi safety selector is great, and everyone should have one. It puts control at the hand on the rear pistol grip. Without it, you either have to take your trigger hand off the rifle, switch the safety, then replace it again, or use the support hand, which requires you to possibly lose position if already on target.
Aim, safety off, fire -- much better than aim, move hand to safety, safety off, return hand to proper spot, aim again, fire.
Not quite following you there. With a standard safety (left side of gun), when shooting lefty, you can manipulate the safety with your index finger. Don't need to necessarily take your hand off of the rifle. Yup, not as easy as using your thumb for the safety on both side though.
I guess it's different if one is primarily a lefty shooter, or occasionally shooting lefty.
-
Not quite following you there. With a standard safety (left side of gun), when shooting lefty, you can manipulate the safety with your index finger. Don't need to necessarily take your hand off of the rifle. Yup, not as easy as using your thumb for the safety on both side though.
I guess it's different if one is primarily a lefty shooter, or occasionally shooting lefty.
I thought this was an "ambiguous" discussion, not just for lefties. Maybe I missed something. Either way, you have to use your trigger finger or RH thumb around to the left side of the receiver, which changes your grip. Possible to do without making too much movement, but you still have to reposition your hand/finger/thumb for proper trigger location.
I like the RH thumb safety for leaving it on safe until you're on target. Similar to the ASAP. Easier for my right hand to manage RH controls than LH.
I guess it's whatever you get used to. Since it's ambi, you have two options. Options are good. :thumbsup:
-
I thought this was an "ambiguous" discussion, not just for lefties. Maybe I missed something. Either way, you have to use your trigger finger or RH thumb around to the left side of the receiver, which changes your grip. Possible to do without making too much movement, but you still have to reposition your hand/finger/thumb for proper trigger location.
I like the RH thumb safety for leaving it on safe until you're on target. Similar to the ASAP. Easier for my right hand to manage RH controls than LH.
I guess it's whatever you get used to. Since it's ambi, you have two options. Options are good. :thumbsup:
Definitely wasn’t meaning to be biased against the wrong handed, I mean southpaw shooters. :-[
I thought you were saying that you needed to take your firing hand completely off the gun to manipulate the safety of you were a lefty and only had the standard safety.
As for the perspective of a “lefty shooter”, I meant that they would encounter the manipulation of the safety with their trigger finger more than a righty. Or at least how I envision. As a rightly, I’m going to encounter the manipulation of the safety with my trigger finger of my support hand a lot less than a lefty.
Then there are AKs and the safety. Poor lefty AK shooters.
-
Definitely wasn’t meaning to be biased against the wrong handed, I mean southpaw shooters. :-[
I thought you were saying that you needed to take your firing hand completely off the gun to manipulate the safety of you were a lefty and only had the standard safety.
As for the perspective of a “lefty shooter”, I meant that they would encounter the manipulation of the safety with their trigger finger more than a righty. Or at least how I envision. As a rightly, I’m going to encounter the manipulation of the safety with my trigger finger of my support hand a lot less than a lefty.
Then there are AKs and the safety. Poor lefty AK shooters.
All AK safeties are ambidextrous, since they are never engaged. :geekdanc:
-
Ordered the KAC and Radian Talon ambi safeties. Hopefully will get them in well before the carbine class and test them out at home before shooting with it. Now just need to decide on which gun they will go on.
-
You don't need to take the trigger out to replace the safety selector. Isn't the ELF a drop in?? Doesn't get easier than that.
I had to move it slightly and with both pins in, it wouldn't budge. It is a drop in which did make it easier (didn't have to hold anything down that's under spring tension).
-
All AK safeties are ambidextrous, since they are never engaged. :geekdanc:
In mother Russia, safety not needed. Hit by bullet make you stronger.
https://www.youtube.com/watch?v=rI01qKAqYts&t=232s
-
I was required in the military to shoot right or left handed.
Admittedly I'm slower as a lefty, but I qualified, time and accuracy.
So I can handle both sides.
Brass flying across your face is disconcerting,
but with practice you can handle it.
-
Biggest for me:
Gave up being "left handed" and went with my dominant right eye.
Now shooting everything right handed, it all fits.
Yeah, hooray for me.
Before, I just coped. Bolt action was beyond me, semi-auto anything was no problem.
-
I'm left-eye dominant, but functionally a righty.
I've never been as awkward with my left had as most people trying to use the opposite hand for typical tasks. I'm almost convinced I was ambidextrous at birth, but time made me favor my right.
The dominant eye thing really gets in the way for me. Haven't figured out whether using the opposite eye or training with the other eye is better. In a hurry, I always tend to revert to dominant.
-
I'm a eighty but occasionally practice lefty. AR15s are relatively easy shooting lefty. Using the trigger finger to flick the safety doesn't take any longer. Changing mags takes about 1 to 2 tenths of a second longer. Biggest thing is you'd use a two finger grasp on the charging handle instead of one finger.
Handguns like the Glock are a little difficult left handed for me. The slide stop and mag release are stiff so I find it difficult to operate with my left trigger finger.
-
Biggest for me:
Gave up being "left handed" and went with my dominant right eye.
Now shooting everything right handed, it all fits.
Yeah, hooray for me.
Before, I just coped. Bolt action was beyond me, semi-auto anything was no problem.
Didn’t realize how common cross hand-eye dominance was until I started shooting. Can usually tell when folks try to shoot say right handed and with their left eye. They sort of tilt their head over and sort of side-eye with their left eye. I usually ask them if they’d like to try shooting left handed. I would say about 50/50 go for it. Usually, newer shooters are more willing to try. Some have disabilities as well that make it a challenge, but still fun to try to help then find a way.
When I shoot lefty, I usually wink or squint my right eye and then my left eye picks up the dot. Once my left eye picks it up, usually easy to keep it. Little tougher with irons, but not bad. For dots, they actually look clearer with my left eye, which I assume is due to less astigmatism.
-
I'm a eighty but occasionally practice lefty. AR15s are relatively easy shooting lefty. Using the trigger finger to flick the safety doesn't take any longer. Changing mags takes about 1 to 2 tenths of a second longer. Biggest thing is you'd use a two finger grasp on the charging handle instead of one finger.
Handguns like the Glock are a little difficult left handed for me. The slide stop and mag release are stiff so I find it difficult to operate with my left trigger finger.
I found shooting Sig P22x series handguns are tougher for me shooting lefty. Mostly because I don’t shoot them very often and also because of the decocker.
-
Regarding the AR ambi controls:
Additional ambi controls aren’t really that necessary. You can run the safety with the palm of your hand (the area right below your index finger, the piece of meat on the opposite side of your knuckle), and rack a standard charging handle with your left hand too. Release the bolt stop with your index finger is also possible (although somewhat difficult for people with weak fingers), and releasing the mag with your right hand thumb. Sure it might add time to your reload speeds but a stock AR can’t be a deal breaker.
Regarding the Magpul BAD lever, it’s a no go. I’ve heard many cases where the lever breaks and renders the rifle almost nonfunctional, and cases where negligent discharges occurred even for folks who’ve used and practiced with it extensively.
The appropriate solution to the problem that the BAD lever was trying to address would be the PDQ ambi bolt release, but you will have to modify your receiver a little bit with a dremel.
-
Regarding the AR ambi controls:
Additional ambi controls aren’t really that necessary. You can run the safety with the palm of your hand (the area right below your index finger, the piece of meat on the opposite side of your knuckle), and rack a standard charging handle with your left hand too. Release the bolt stop with your index finger is also possible (although somewhat difficult for people with weak fingers), and releasing the mag with your right hand thumb. Sure it might add time to your reload speeds but a stock AR can’t be a deal breaker.
Regarding the Magpul BAD lever, it’s a no go. I’ve heard many cases where the lever breaks and renders the rifle almost nonfunctional, and cases where negligent discharges occurred even for folks who’ve used and practiced with it extensively.
The appropriate solution to the problem that the BAD lever was trying to address would be the PDQ ambi bolt release, but you will have to modify your receiver a little bit with a dremel.
For charging handles, I mostly have BCM charging handles and one LMT, which is quite similar to the BCM design, that is meant to be operated with your left hand when shooting righty. When shooting lefty, you’d have to operate the “old school”, over the top way with your right hand. Or I guess you can use your left hand, but that forces you to take your shooting hand off of the gun. Anyways, I don’t particularly like either method when shooting lefty, so I wanted to try an ambi CH. Maybe not needed, but I think it would be helpful.
As for the BAD, I don’t have them on any of my guns. I’ve heard of their problems and have seen guns mysteriously start functioning well once they are removed. That said, maybe user or installation error as I’ve seen some BTDT shooters with them on their guns and they don’t seem to have an issue.
-
Ambi controls are nice to have. Not entirely needed but milspec parts can be most definitely swapped out for much better stuff like the BCM charging handle as mentioned. I have a ambi bcm CH but I’ve never used it left handed because the forward assist just annoys me when I try to grab the latch.
-
Ambi controls are nice to have. Not entirely needed but milspec parts can be most definitely swapped out for much better stuff like the BCM charging handle as mentioned. I have a ambi bcm CH but I’ve never used it left handed because the forward assist just annoys me when I try to grab the latch.
For the AR, I would agree that ambi stuff like the CH and safety selector aren't needed, but I am also interested in anything that can make the gun easier/quicker to manipulate or provide a performance benefit. WRT performance benefit, I believe best way to improve that is to shoot often, which I try to do. That said, without trying these features, they would continue to be one of those things where I don't know what I don't know.
The forward assist interfering with the ambi CH was something that I read about. I believe the Radian Raptor has a slightly larger lever on the right side to help with clearance.
-
For the AR, I would agree that ambi stuff like the CH and safety selector aren't needed, but I am also interested in anything that can make the gun easier/quicker to manipulate or provide a performance benefit. WRT performance benefit, I believe best way to improve that is to shoot often, which I try to do. That said, without trying these features, they would continue to be one of those things where I don't know what I don't know.
The forward assist interfering with the ambi CH was something that I read about. I believe the Radian Raptor has a slightly larger lever on the right side to help with clearance.
Yup. This has been on my list https://radianweapons.com/receivers/lowers/lower-receiver
-
I’ve been looking to build a upper without the forward assist. That stuff is dead weight and extra bulk anyway in my book.
-
Yup. This has been on my list https://radianweapons.com/receivers/lowers/lower-receiver
Wow! That lower is quite pricey!
Is the controls similar to the KAC SR-15? I think the SR-15 E3 MOD 2 has a bunch of ambi features. Speaking of pricey! When I got my first AR, I was considering a KAC, but I could have gotten two DD for about the price of a KAC.
I have the Radian Talon safety selector on the way. I'm looking forward to trying the 45 degree capability of that selector.
-
I’ve been looking to build a upper without the forward assist. That stuff is dead weight and extra bulk anyway in my book.
An upgrade to a flat top upper will certainly help with the "dead weight" reduction aspect.
You're the one with the A2 upper and gooseneck optic mount, right?
-
I’ve been looking to build a upper without the forward assist. That stuff is dead weight and extra bulk anyway in my book.
Agreed. As the estimable Clint Smith has said, "if the round ain't going in, you probably shouldn't be jamming the shit out of it."
-
Agreed. As the estimable Clint Smith has said, "if the round ain't going in, you probably shouldn't be jamming the shit out of it."
Learn something new every day.
And there's an opportunity for a "that's not what she said" thing in there somewhere. :rofl:
-
Learn something new every day.
And there's an opportunity for a "that's not what she said" thing in there somewhere. :rofl:
"use spit"
-
As a lefty, the only two things I care about are the mag release and safety, above all the mag release though. Fire selector too, but realistically I don't think I'm gonna have that option in my lifetime lol.
Charging handles don't bother me at all, you just get used to and its just as quick/easy one way vs another.
-
As a lefty, the only two things I care about are the mag release.
For a lefty, sweep your right hand down the handguard and press the mag release with your thumb while grabing the magazine at the same time. Then use the downward motion to grab a magazine from your pouch.
Should be one smooth motion sweeping down.
Then ill load a mag and press the bolt release with my right middle finger reaching around the bottom of the rifle then grab the handguard. One smooth motion. From your mag pouch to your handguards
-
As a lefty, the only two things I care about are the mag release and safety, above all the mag release though. Fire selector too, but realistically I don't think I'm gonna have that option in my lifetime lol.
Charging handles don't bother me at all, you just get used to and its just as quick/easy one way vs another.
For mag release, I'm actually ok with it being only on the right side (when I'm shooting lefty). The harder part is getting to the full mag off my belt as they are on my left side, but behind the pistol mags. So I have to reach behind my back with my right arm to get to the rearmost mag. But the important thing here is that one has tried for themself and see what works and what might have a better way.
Fire selector in your lifetime? You mean wanting one that has the full auto option? ;D
-
For mag release, I'm actually ok with it being only on the right side (when I'm shooting lefty). The harder part is getting to the full mag off my belt as they are on my left side, but behind the pistol mags. So I have to reach behind my back with my right arm to get to the rearmost mag. But the important thing here is that one has tried for themself and see what works and what might have a better way.
Fire selector in your lifetime? You mean wanting one that has the full auto option? ;D
Where's your chest rig fool? Got one of those you can borrow too lol.
-
Where's your chest rig fool? Got one of those you can borrow too lol.
Don't got none of that. . . :(
I am actually working with USGG now on a custom one that will accept both AK and AR mags, but haven't even started the order yet. Just got in the swift clips last week that Robert said he needed to start the project. Gonna be interesting when I shoot the AK this weekend. The mags might have to be in my pants pockets. 8) I mean my HSGI belt can accept the AK mags fine, but that's not the belt that I have been using most often.
-
Don't got none of that. . . :(
I am actually working with USGG now on a custom one that will accept both AK and AR mags, but haven't even started the order yet. Just got in the swift clips last week that Robert said he needed to start the project. Gonna be interesting when I shoot the AK this weekend. The mags might have to be in my pants pockets. 8) I mean my HSGI belt can accept the AK mags fine, but that's not the belt that I have been using most often.
Sounds expensive... what's the estimated cost?
-
My Haley Strategic D3CR can hold AR and AK mags. As always the offer is open lol. Not like u live far away.
-
Sounds expensive... what's the estimated cost?
No additional cost from the chest rig that it's being based off of. I think around $170. It's somewhat inspired by the D3CR, but lighter/simpler. The compatibility with the swift clips is the key aspect though.
My Haley Strategic D3CR can hold AR and AK mags. As always the offer is open lol. Not like u live far away.
Ok. That might be helpful. I was thinking of trying that chest rig and came close to ordering one. At a recent carbine class, a couple of AK shooters had them and it seemed to work pretty well for them.
Let me hit you up on when I think I will be free this week. Probably in the evening tomorrow through Thursday.
-
No additional cost from the chest rig that it's being based off of. I think around $170. It's somewhat inspired by the D3CR, but lighter/simpler. The compatibility with the swift clips is the key aspect though.
Ok. That might be helpful. I was thinking of trying that chest rig and came close to ordering one. At a recent carbine class, a couple of AK shooters had them and it seemed to work pretty well for them.
Let me hit you up on when I think I will be free this week. Probably in the evening tomorrow through Thursday.
Sounds good, I'm always at home early, 4:30ish so I can hang with ma baby.
-
Radian Talon and KAC am I safeties came in today.
Installed the Radian first. It came with its own safety detent and spring. The operation was smooth but still with positive clicks in each position. Felt the right side safety lever extended a little too much and affected my trigger finger.
Then installed the KAC. The Radian seemed smoother, but the KAC was pretty smooth and also positive clicks. It comes with three options for the right side lever. Put on the one with the bottom section rounded out as it seemed to have the least affect in my trigger finger. Did some dry fire with both hands and I am able to manipulate the safety with my left thumb when dry firing lefty. Still feels more “normal” to use my left hand index finger/pad to work the safety.
Left the KAC on the gun and will give that one a try. First impression was that I prefer the standard safety, but think mostly just because that is what I’m used to. Will certainly give it some time and see how it shakes out.
-
never had a need for ambi charging handle until I started the AR in 7.62x39 build and was getting some ftf, cartridge would get stuck pretty hard going into the chamber and using the milspec CH was kind of difficult bc I couldn't get a very good grip and pull it out
so I switched to the ambi CH just bc I could get a better grip on it to extract the ftf. in that sense it works better for me
since then I've solved the ftf problem, but I keep the ambi CH just in case
-
Radian Talon and KAC am I safeties came in today.
Installed the Radian first. It came with its own safety detent and spring. The operation was smooth but still with positive clicks in each position. Felt the right side safety lever extended a little too much and affected my trigger finger.
Then installed the KAC. The Radian seemed smoother, but the KAC was pretty smooth and also positive clicks. It comes with three options for the right side lever. Put on the one with the bottom section rounded out as it seemed to have the least affect in my trigger finger. Did some dry fire with both hands and I am able to manipulate the safety with my left thumb when dry firing lefty. Still feels more “normal” to use my left hand index finger/pad to work the safety.
Left the KAC on the gun and will give that one a try. First impression was that I prefer the standard safety, but think mostly just because that is what I’m used to. Will certainly give it some time and see how it shakes out.
Did you install the safety as 45 degree throw or 90??
-
Did you install the safety as 45 degree throw or 90??
90. Didn’t try the 45, but that was something I wanted to try out though.
-
Due to my assignment in the USAF, I was required to qualify right handed and left handed firing of an M16.
Timed firing and accuracy.
The major problem is getting used to the brass flying out of the gun across your face.
I'm not fully ambidextrous but I can do everything left handed, albeit much slower.
I have broken my right hand many times so I had lots of practice going "lefty".
-
Due to my assignment in the USAF, I was required to qualify right handed and left handed firing of an M16.
Timed firing and accuracy.
The major problem is getting used to the brass flying out of the gun across your face.
I'm not fully ambidextrous but I can do everything left handed, albeit much slower.
I have broken my right hand many times so I had lots of practice going "lefty".
So what you're saying is that you are your own ambidextrous firearm feature. . . :thumbsup: ;D
I have a few friends who are pretty close to true ambidextrous for athletic stuff and both of them broke their dominant side arm when they were younger and that forced them to do stuff with their "off hand".
-
So what you're saying is that you are your own ambidextrous firearm feature. . . :thumbsup: ;D
I have a few friends who are pretty close to true ambidextrous for athletic stuff and both of them broke their dominant side arm when they were younger and that forced them to do stuff with their "off hand".
I suppose that was my point, although I have not mastered left handed batting.
-
Late to this party, but #1, I am EXTREMELY HAPPY to see guys excited about training here in Hawaii and doing a lot of mental push-ups in regards to their strengths and more importantly weaknesses and wanting to explore options. I also appreciate guys "trusting", but wanting to "verify" information first hand. Warms my heart!
As for ambi, I have always been fortunate to be reasonably ambi throughout my life in most sports, like baseball, soccer, golf, and shooting. I have been a long time proponent of becoming more efficient with the support side, despite the old school dogma of "consistency of platform," and to "train for higher percentages." While I generally agree, I am a bit more open-minded, and my answer has always been if you have the time to train more skills to proficiency the better off you are. If time and resources are limited stick to the basics until you can pull them off in your sleep. If you have the ability, mastering more skills increases your efficacy.
-
So what you're saying is that you are your own ambidextrous firearm feature. . . :thumbsup: ;D
Yabbut, it is a painful training method............. :shake:
-
Yabbut, it is a painful training method............. :shake:
Sometimes lessons are best learned the hard way. . . :(
:rofl:
-
Recently installed an ambi charging handle (gift). :love:
Still working on it. :-\
Should be receiving an ambi safety today so I can work on a "New"' technique/requirement for reloading AR. :grrr:
My thumb just didn't seem to reach the regular safety fast enough :P so with an ambi safety, I should be able to "sweep" the safety back with my dominant trigger finger but still drop it with my dominant thumb. :D
(I'll bring your oil Saturday :oops: )
-
Recently installed an ambi charging handle (gift). :love:
Still working on it. :-\
Should be receiving an ambi safety today so I can work on a "New"' technique/requirement for reloading AR. :grrr:
My thumb just didn't seem to reach the regular safety fast enough :P so with an ambi safety, I should be able to "sweep" the safety back with my dominant trigger finger but still drop it with my dominant thumb. :D
(I'll bring your oil Saturday :oops: )
You can't (eta) reach the safety with your right thumb? Due to past injury?
Ok on Sat. Is DJ going to be there too?
-
You can't safety with your right thumb? Due to past injury?
Ok on Sat. Is DJ going to be there too?
I find flipping the lever to safe is a bit more difficult to do quickly when doing things like reloads and transition to pistol. About an extra one or two tenths of a second for me.
-
You can't (eta) reach the safety with your right thumb? Due to past injury?
Don't think it's due to my gloved past injury cuz that's my left hand (non-dom) :crazy:
I can reach it but just have difficulty pushing it up fast enough to suit my needs for that particular drill.
It's like I lack the motion or strength.
That " extra one or two tenths of a second for me" is deemed unacceptable.
Additional practice made little improvement. :'(
Ok on Sat. Is DJ going to be there too?
Yup, along with our buddy who could not make the journey with us last time.
-
Yup, along with our buddy who could not make the journey with us last time.
Cool. I'll have the AK that I was chatting with DJ about in the last class. I had most of the parts then, but finally got around to putting it together.
-
I got to fiddle with the Radian Talon in the 45 degree throw configuration last night. Went over to a friend's house and he was showing off his Noveske rifle with Geissele trigger (the trigger seemed pretty sweet). The way that the 45 degree throw works keeps the right side tab on the safety a little higher. It still hit my trigger finger, but less than if it was in the normal 90 degree throw configuration. So much to try. Might have to install it on another lower and try it out this weekend too. So much to try out, so little range time. And so little ammo. . .
;D
-
I got to fiddle with the Radian Talon in the 45 degree throw configuration last night. Went over to a friend's house and he was showing off his Noveske rifle with Geissele trigger (the trigger seemed pretty sweet). The way that the 45 degree throw works keeps the right side tab on the safety a little higher. It still hit my trigger finger, but less than if it was in the normal 90 degree throw configuration. So much to try. Might have to install it on another lower and try it out this weekend too. So much to try out, so little range time. And so little ammo. . .
;D
It's good to practice with other peoples mods, this way if your life ever relied on picking up someone else's rifle, you minimize the "surprise" of the ergonomics of levers and buttons. The 1st time I tried the Talon, it set me back a second or 2. So imagine if under stress.
This is also why I power stroke and don't use the slide release. On my wifes M&P9c, its a slide lock, not a release. So when we were at a HDF pistol class, we all had to use each others guns. When it came for others to use hers, they fumbled a lot trying to release the slide with the slide stop. We had to shout "POWER STROKE". This is even after telling them to power stroke prior to the evolution starting. It was a timed team evolution. So seconds matter.
-
I was surprised how the ambi safety rubbed my trigger finger. I thought I had shot guns with ambi safeties before and I don't recall noticing that. I assume it was because I had been reading about people's experience with ambi safeties and the impact of the trigger finger was something that came up often. Wondering if I might not have really noticed if I hadn't read about it. Well, will see this weekend if it really bothers me when shooting.
The only other ambi features that I noticed messes me up is the BAD Lever. Mostly because of the space it takes above the trigger guard. I've also seen where people inadvertantly activated the level. Something I think I assume I could get used to if I wanted to use that device, but so far, not one that is high on my list to try.
-
Shot with the KAC ambi safety yesterday. Didn't notice the lever on the right side really at all when shooting. I thought it might be a nuisance after trying some dry fire. Didn't shoot lefty yesterday, so didn't get a chance to see if the ambi safety helped in that regard.
I did shoot another gun with the Radian Talon with the 45 degree throw and that seemed interesting. Something I'll have to try and compare against the KAC ambi safety.
-
Geissele ACH FINALLY arrived yesterday. Almost 4 weeks after order. Swapped out the BCM CH and was doing some dry manipulations. Since I'm used to the BCM CH and similar one from LMT, the ACH felt a little different using the left side CH, but seemed ok. Using the right side of the CH for the first time was awkward. Not sure if my right hand isn't used to operating the CH or if I was pulling at a wrong angle, but seemed like I had a harder time getting the CH all the way back. I think that's mostly from never having used an ambi CH before, but something that I noticed. My overall first impression was somewhat of a MEH, but with the realization that I'll have to give it some time. Not something that made me want to get one for my other ARs.
I've not done malfunction clearance left that much. When I did, I mostly used the over the top method since the latch is on the left side, and similar to how I envision most AR users work the stock CH. Not one handed from the right side, mirroring what I would do when I shoot righty.
Seems like a quality product, but just will have to see how it works for me.