2aHawaii
Tools and Uses => Reloading => Topic started by: ren on January 19, 2018, 02:46:11 PM
-
https://www.facebook.com/USAMU1956/posts/10156297892204734 (https://www.facebook.com/USAMU1956/posts/10156297892204734)
Interesting. The AMU loads virgin cases with crimped in primers. From I hear their loads are hot. For example, a 77 SMK flying at 2900 fps
-
https://www.facebook.com/USAMU1956/posts/10156297892204734 (https://www.facebook.com/USAMU1956/posts/10156297892204734)
Interesting. The AMU loads virgin cases with crimped in primers. From I hear their loads are hot. For example, a 77 SMK flying at 2900 fps
I don't do that precision type of shooting so while this was really interesting, it is not so much applicable to what I do. But thanks for sharing this. I'm always interested to read about what others are doing. To me, reloading is a constant learning process.
When I first started reloading .223/5.56 I bought military style ammo and prepped 1,000's and 1,000's of LC and Fed once fired cases. I finally realized after all the work that I was not saving much money over buying commercial LC brass. So now I give away all my military style brass and as I get low I just buy new commercial LC brass by the 1,000. Maybe I'm getting lazy?
-
https://www.facebook.com/USAMU1956/posts/10156297892204734 (https://www.facebook.com/USAMU1956/posts/10156297892204734)
Interesting. The AMU loads virgin cases with crimped in primers. From I hear their loads are hot. For example, a 77 SMK flying at 2900 fps
Thanks for sharing. Looking forward to their next 2 parts.
-
https://www.facebook.com/USAMU1956/posts/10156297892204734 (https://www.facebook.com/USAMU1956/posts/10156297892204734)
Interesting. The AMU loads virgin cases with crimped in primers. From I hear their loads are hot. For example, a 77 SMK flying at 2900 fps
waiting for someone with a thick Kentucky accent to come along and tell us what they are doing wrong...
-
I do the same as the AMU posts.
Once fired LC cases get deprimed then wet tumbled. Annealed for 6 seconds. Spray lube (made with Lee resizing lube in 99% alchohol). Sized on a Lee single stage. Primer pockets swaged with a Dillon. Trimmed with a Giraud TriWay. Wet tumbled. Dried. Final dry tumble in corn cob with NuFinish (I like bling) . Primed and loaded on a Dillon 550. No crimp.
-
Had to look it up.
https://www.youtube.com/watch?v=JYotoibCehc
-
Had to look it up.
https://www.youtube.com/watch?v=JYotoibCehc
all this time studying reloading and you never heard about using nu-finish?
-
Had to look it up.
https://www.youtube.com/watch?v=JYotoibCehc
The brass gets shinier, <bling bling> than what is in the video after a wet tumble and a dry tumble through NuFinish. 8)
(http://www.koogle.tv/static/media/uploads/newest-news/0802_kpoprappers_04.jpg)
-
all this time studying reloading and you never heard about using nu-finish?
it was in a hard to understand accent ???
-
The brass gets shinier, <bling bling> than what is in the video after a wet tumble and a dry tumble through NuFinish. 8)
(http://www.koogle.tv/static/media/uploads/newest-news/0802_kpoprappers_04.jpg)
grils
-
grils
Are they still in demand? Ever done a set?
-
Are they still in demand? Ever done a set?
no and no
-
Can you light a match on those?
-
Are grils covered by dental insurance? ;)
-
Are grils covered by dental insurance? ;)
nope