2aHawaii

Tools and Uses => Firearms and Accessories => Topic started by: Rhed on July 28, 2018, 09:19:24 AM

Title: Thoughts on a sonic cleaner for rifle parts or hand guns?
Post by: Rhed on July 28, 2018, 09:19:24 AM
I’m thinking of getting a sonic cleaner. Like the one from Hornady. Mostly to clean rifle uppers like after every 3rd trip out. With normal barrel cleanings after every trips. Occasionally lowers. And pistols too. Any up’s and down sides with sonic cleaners? Is it worth it?
Title: Re: Thoughts on a sonic cleaner for rifle parts or hand guns?
Post by: macsak on July 28, 2018, 09:58:31 AM
I’m thinking of getting a sonic cleaner. Like the one from Hornady. Mostly to clean rifle uppers like after every 3rd trip out. With normal barrel cleanings after every trips. Occasionally lowers. And pistols too. Any up’s and down sides with sonic cleaners? Is it worth it?

you going to take the barrel off and clean the upper?
Title: Re: Thoughts on a sonic cleaner for rifle parts or hand guns?
Post by: Rhed on July 28, 2018, 11:02:47 AM
you going to take the barrel off and clean the upper?

Well with the barriel on too. I meant like the whole upper with barrel on. US clean every 3rd trips. But I’ll still do the usual barrel cleanin with after every trip. Just not in the US cleaner all the time..
Title: Re: Thoughts on a sonic cleaner for rifle parts or hand guns?
Post by: Inspector on July 28, 2018, 01:08:44 PM
Make sure the US cleaner is big enough to hold the parts you want to clean. Most of them vary in size. I have the RCBS US cleaner. It is pretty good size for an US cleaner. It is easy to change the solution. It has heat and can be run for up to 30 minutes at a time. It works well for me. Make sure you use the proper cleaning solution type for the parts you are cleaning.
Title: Re: Thoughts on a sonic cleaner for rifle parts or hand guns?
Post by: Q on July 28, 2018, 01:48:59 PM
Works well with simple green.
Title: Re: Thoughts on a sonic cleaner for rifle parts or hand guns?
Post by: ren on July 28, 2018, 02:39:54 PM
Works well with simple green.

Don't dip an AR lower in it.
Title: Re: Thoughts on a sonic cleaner for rifle parts or hand guns?
Post by: Rhed on July 29, 2018, 10:13:45 AM
Make sure the US cleaner is big enough to hold the parts you want to clean. Most of them vary in size. I have the RCBS US cleaner. It is pretty good size for an US cleaner. It is easy to change the solution. It has heat and can be run for up to 30 minutes at a time. It works well for me. Make sure you use the proper cleaning solution type for the parts you are cleaning.
This is the one I looking at..

https://www.hornady.com/reloading/case-care/sonic-cleaners-and-solutions/hornady-hot-tub-sonic-cleaner
Title: Re: Thoughts on a sonic cleaner for rifle parts or hand guns?
Post by: Inspector on July 29, 2018, 10:52:13 AM
This is the one I looking at..

https://www.hornady.com/reloading/case-care/sonic-cleaners-and-solutions/hornady-hot-tub-sonic-cleaner
That thing is HUGE!!! 😱😱😱
Title: Re: Thoughts on a sonic cleaner for rifle parts or hand guns?
Post by: Rhed on July 29, 2018, 11:22:17 AM
That thing is HUGE!!! 😱😱😱

I get that all the time too...  :rofl: :rofl:
Title: Re: Thoughts on a sonic cleaner for rifle parts or hand guns?
Post by: michaelkih on July 29, 2018, 11:27:57 PM
Isn't a sonic cleaner kind of a bit too much?  I just use q tips, rags, and gun cleaner/oil on all my pistols, rifles, shotguns, full autos, and even suppressors.  Always been good enough for me, clean, accurate, and goes bang, or am I not doing enough here?
Title: Re: Thoughts on a sonic cleaner for rifle parts or hand guns?
Post by: Soleyobo on July 30, 2018, 05:06:46 AM
Isn't a sonic cleaner kind of a bit too much?  I just use q tips, rags, and gun cleaner/oil on all my pistols, rifles, shotguns, full autos, and even suppressors.  Always been good enough for me, clean, accurate, and goes bang, or am I not doing enough here?
>:D

Weird I was just watching US cleaning videos on youtube. 
Title: Re: Thoughts on a sonic cleaner for rifle parts or hand guns?
Post by: Inspector on July 30, 2018, 06:13:19 AM
I get that all the time too...  :rofl: :rofl:
Yeah, from the guys at work!!!  :rofl: :rofl: :rofl:
Title: Re: Thoughts on a sonic cleaner for rifle parts or hand guns?
Post by: rklapp on July 30, 2018, 06:40:32 AM
I always worry about the metal rusting after being submerged in the bath. Need to oil it right away after taking the parts out.
Title: Re: Thoughts on a sonic cleaner for rifle parts or hand guns?
Post by: Rhed on July 30, 2018, 10:26:13 PM
I always worry about the metal rusting after being submerged in the bath. Need to oil it right away after taking the parts out.

I figured just blow it dry with a compressor. Then grease/ lube parts.