2aHawaii

Tools and Uses => Firearms and Accessories => Topic started by: stangzilla on October 19, 2018, 08:12:33 AM

Title: Ruger Custom shop
Post by: stangzilla on October 19, 2018, 08:12:33 AM: https://www.ruger.com/micros/customShop/

great. now they have something new to take my money. :D
so far they only have a competition 1911 for $2500, and a competition 10/22 for $900
i'm sure there'll be more to come
Title: Re: Ruger Custom shop
Post by: drck1000 on October 19, 2018, 08:21:08 AM: You better start saving up! ;D

Good to see them expanding and getting into the custom market. Hopefully the launch goes smoothly.
Title: Re: Ruger Custom shop
Post by: stangzilla on October 19, 2018, 08:32:32 AM: all I need is for them to make a custom GP100 or Blackhawk and i'll be the sucker that will buy it. :geekdanc:
Title: Re: Ruger Custom shop
Post by: changemyoil66 on October 19, 2018, 09:14:21 AM: Do you know what the MOA guarantee is? Like how KIDD has a guarantee. So if it doesn't perform, then it's the Indian, not the arrow. Unless you're 1/1024.
Title: Re: Ruger Custom shop
Post by: changemyoil66 on October 19, 2018, 09:39:56 AM: FYI that 30 MOA rail is killer. Luckily my scope can handle and our ranges don't pass 100 yards. But Ruger does make a 0 MOA rail. The Ruger Precision Rimfire Rifle comes with the same 30 MOA rail. I would say my max range is 200 yards, before I would need either the 0 MOA rail or higher rings.

Some people with bigger than 40mm objectives have a problem with the objective touching the handguard for the RPRR. Shouldn't be a problem for the 10/22 because there is no handguard.
Title: Re: Ruger Custom shop
Post by: Inspector on October 20, 2018, 07:29:42 AM: Quote from: stangzilla on October 19, 2018, 08:12:33 AM
https://www.ruger.com/micros/customShop/

great. now they have something new to take my money. :D
so far they only have a competition 1911 for $2500, and a competition 10/22 for $900
i'm sure there'll be more to come
I told them about you and how much money you have. They listened to me and now look........ :rofl: :rofl: :rofl:

Seriously, I am sure all the Ruger fans out there have been asking for a custom shop. One thing I love about Ruger, besides being an all American company, is that they listen to their customers. It might take a while, but they listen. Look at all the Lipsey’s specials and one offs that they do.
Title: Re: Ruger Custom shop
Post by: stangzilla on October 21, 2018, 06:01:54 AM: Quote from: Inspector on October 20, 2018, 07:29:42 AM
I told them about you and how much money you have. They listened to me and now look........ :rofl: :rofl: :rofl:

Seriously, I am sure all the Ruger fans out there have been asking for a custom shop. One thing I love about Ruger, besides being an all American company, is that they listen to their customers. It might take a while, but they listen. Look at all the Lipsey’s specials and one offs that they do.

Hopefully the new year will bring new custom Rugers.
I dont have any Lipseys but they do make a lot that I would like to own
I do own 5 Talo edition Rugers which I really like all of them. My favorite is the 3 inch GP100 Wiley Clapp model. Matte blue finish, rounded edges, brass bead front sight and Novak rear, special WC grips. Its functional and looks good too. And it was only $100 more than a regular GP100.
Title: Re: Ruger Custom shop
Post by: Inspector on October 21, 2018, 02:45:50 PM: Quote from: stangzilla on October 21, 2018, 06:01:54 AM
Hopefully the new year will bring new custom Rugers.
I dont have any Lipseys but they do make a lot that I would like to own
I do own 5 Talo edition Rugers which I really like all of them. My favorite is the 3 inch GP100 Wiley Clapp model. Matte blue finish, rounded edges, brass bead front sight and Novak rear, special WC grips. Its functional and looks good too. And it was only $100 more than a regular GP100.
I really like that matte blue finish as well. It is quite the looker if you ask me. :thumbsup: :thumbsup: :thumbsup:
Title: Re: Ruger Custom shop
Post by: drck1000 on October 22, 2018, 08:41:28 AM: Speaking of Talo editions, I'd be very tempted to get one a Vaquero if the custom shop ever gets around to them. Always wanted a SSA-type revolver.

(http://cdn2.armslist.com/sites/armslist/uploads/posts/2015/02/16/4037567_01__talo_edition_ruger_vaquero_45_640.jpg)
Title: Re: Ruger Custom shop
Post by: stangzilla on November 01, 2018, 08:37:27 AM: https://youtu.be/exEuR4NVdOQ
https://youtu.be/qj4r5yGZVfM
Title: Re: Ruger Custom shop
Post by: Inspector on November 01, 2018, 03:29:20 PM: Quote from: stangzilla on November 01, 2018, 08:37:27 AM
https://youtu.be/exEuR4NVdOQ
https://youtu.be/qj4r5yGZVfM
Nice! I like both of those. Been wanting a real 1911 for some time now. And I need to at least get my hands on that 10/22 just to see how it feels.
Title: Re: Ruger Custom shop
Post by: davek42 on November 25, 2018, 05:13:07 PM: Do not plan on custom shop guns being cheap. Man hours ie hand fitted parts cost money. Do not expected guns like" Ed Brown", "Nighthawk customs". You will get what you pay for.
davek42
Title: Re: Ruger Custom shop
Post by: stangzilla on February 10, 2020, 01:34:25 PM: https://ruger.com/products/sr1911Competition/models.html

now the custom shop makes a 1911 in 45acp, like they should have done from the start.
MSRP is 2200, but if you order online can be as low as 1400
Title: Re: Ruger Custom shop
Post by: stangzilla on February 10, 2020, 02:51:48 PM: https://ruger.com/products/sr1911CommanderStyle/specSheets/6708.html

commander 1911
Title: Re: Ruger Custom shop
Post by: stangzilla on February 19, 2020, 07:33:34 AM: the custom 10/22 now has 3 different kinds of stocks

https://www.ruger.com/micros/customShop/31147.html
https://www.ruger.com/micros/customShop/31127.html
https://www.ruger.com/micros/customShop/31120.html

https://www.youtube.com/watch?v=qj4r5yGZVfM
https://www.youtube.com/watch?v=BI_VPBl5leE