2aHawaii

General Topics => General Discussion => Topic started by: codeblue808 on April 23, 2012, 05:34:36 PM

Title: Cleaning supplies?
Post by: codeblue808 on April 23, 2012, 05:34:36 PM
Hey guys, I'm new to the firearms scene and just purchased a handgun and will be getting a AR15 in the near future.  I was wondering what supplies, solvents, etc. you guys recommend.  I've read the "General Discussion / Re: Handgun cleaning" thread but that was a year or so ago, and was wondering if anything new has come out since, and also want suggestions for long gun.  Thanks in advance.
Title: Re: Cleaning supplies?
Post by: Tom_G on April 23, 2012, 05:38:32 PM
Break-Free CLP, Hoppes #9, and lots of patches.  A bronze brush and bronze jag each in whatever calibers you end up buying.  A single-piece rifle-length cleaning rod for your Ar and subsequent longarms, and a short rod for the pistol. 
Title: Re: Cleaning supplies?
Post by: mishka on April 23, 2012, 05:56:42 PM
That's helpful, thanks for that, Tom.   

Not to hi-jack this thread, but anyone wanna share what you wipe the outer metal parts down with? 

My uncle likes to use a horsehair brush and some sort of solvent, I have to check what the stuff was. 

Do you guys like to use different stuff for stainless and blued parts?
Title: Re: Cleaning supplies?
Post by: jc2721 on April 23, 2012, 05:57:21 PM
Break-Free CLP, Hoppes #9, and lots of patches.  A bronze brush and bronze jag each in whatever calibers you end up buying.  A single-piece rifle-length cleaning rod for your Ar and subsequent longarms, and a short rod for the pistol.

I'd add a toothbrush and some bore snakes in the appropriate calibers.
Title: Re: Cleaning supplies?
Post by: jc2721 on April 23, 2012, 06:02:16 PM
That's helpful, thanks for that, Tom.   

Not to hi-jack this thread, but anyone wanna share what you wipe the outer metal parts down with? 

My uncle likes to use a horsehair brush and some sort of solvent, I have to check what the stuff was. 

Do you guys like to use different stuff for stainless and blued parts?

I use CLP on a cleaning patch to wipe down metal parts.  I've started to use Birchwood Casey's "Barricade" on metal parts that I don't normally wipe down (under pistol grips, barrels & actions of rifles covered by stocks, guns going into semi-long term storage).  Barricade was recommended to me by a local gunsmith.  So far, results have been good.  Stainless guns get wiped with a clean cloth, but I don't oil the surface.
Title: Re: Cleaning supplies?
Post by: Inspector on April 23, 2012, 07:59:43 PM
Break-Free CLP, Hoppes #9, and lots of patches.  A bronze brush and bronze jag each in whatever calibers you end up buying.  A single-piece rifle-length cleaning rod for your Ar and subsequent longarms, and a short rod for the pistol.
I second this but would like to add a couple of things. First on the single piece rifle length cleaning rod I have a carbon fiber type and I think it is one of the best things I have purchased in the last couple of years. I've had aluminum and brass rods but the carbon fiber is superior. Also, I used to use only gun scrubber or Hoppe's spray gun cleaner but found it is quite expensive if you shoot and clean a lot. After going back to Hoppe's #9 I found that even after running a clean dry patch after cleaning with Hoppe's #9 I still run one patch with the spray cleaner and it seems to find a small amount of Hoppe's #9 residue. So now my routine includes this last step. Plus I use Hoppe's #9 Copper Solvent as well when I either put a lot of rounds in one sitting or I have a new gun/barrel I am breaking in.
Title: Re: Cleaning supplies?
Post by: TastesLikeMetal on April 23, 2012, 08:53:14 PM
I just blast everything with Ballistol...
Title: Re: Cleaning supplies?
Post by: 808shooter on April 23, 2012, 09:25:20 PM
M-pro 7
Title: Re: Cleaning supplies?
Post by: Echo5Alpha on April 23, 2012, 10:32:55 PM
M-pro 7

I got complaints from the wife with good ole' CLP because of the smell.  I switched to M-Pro 7 and she's hasn't uttered a word about my cleaning since.
Title: Re: Cleaning supplies?
Post by: codeblue808 on April 23, 2012, 10:47:02 PM
Thanks for your comments everyone, keep them coming.  Looking to pick up some supplies this week.
Title: Re: Cleaning supplies?
Post by: codeblue808 on April 23, 2012, 10:48:13 PM
I got complaints from the wife with good ole' CLP because of the smell.  I switched to M-Pro 7 and she's hasn't uttered are word about my cleaning since.
Hey Major, what does the CLP smell like?
Title: Re: Cleaning supplies?
Post by: Echo5Alpha on April 23, 2012, 10:52:34 PM
Hey Major, what does the CLP smell like?

Like Strawberry Cheesecake.  Just kidding, but it is your right of passage (as a firearms owner) to discover on your own.
Title: Re: Cleaning supplies?
Post by: Jkeone808 on April 24, 2012, 02:16:17 AM
I just blast everything with Ballistol...

Same here. In and out.
Title: Re: Cleaning supplies?
Post by: Heavies on April 24, 2012, 03:01:06 AM
For my rifles I use BoreTech Eliminator first, this gets all the copper out.  I run 3 wet patches scrub with a nylon brush then 2 or three wet patches to get the bulk out.  In my good barrels there is very little copper but if there is some blue on the patch I let it soak for 30 min to a couple hours then repeat until there is no blue.  Then I push dry patches to get all that stuff out, and I then I use BoreTech Carbon Cutter.  Using the same method as previous to get all the carbon out.  Lastly, after the bore is dried out with patches I protect it with a layer of CLP penetrating oil.  Not sopping wet just a very light light coat.

This may seem like a lot of work, but in reality it is more of a function letting the solvents do the major work.  I am in no particular rush to get the rifles locked back up in the safe.

Protect the throat with a bore guide that fits your action properly, and protect the crown by using a quality cleaning rod and being careful as the utensils leave the muzzle.
Title: Re: Cleaning supplies?
Post by: Inspector on April 24, 2012, 06:10:15 AM
Hey Major, what does the CLP smell like?
Ever wonder what Hoppes #9 smells like? Do you like the way it smells?

http://www.hoppes.com/products/ca_air_freshener.html (http://www.hoppes.com/products/ca_air_freshener.html)

Enjoy!
Title: Re: Cleaning supplies?
Post by: kavawava on April 24, 2012, 08:43:44 AM
Same here. In and out.

I've been looking everywhere locally for ballistol, where do you guys get yours? Online?
Title: Re: Cleaning supplies?
Post by: codeblue808 on April 24, 2012, 08:49:11 AM
Major - lol. 
Gonna look into ballistol.
Heavies - Thanks for sharing your technique. 
Inspector - Sweet!  Maybe we should hang it on our rear view mirrors and ppl who know, knows not to mess with our cars.  lol.
Title: Re: Cleaning supplies?
Post by: 808shooter on April 24, 2012, 09:28:32 AM
I've been looking everywhere locally for ballistol, where do you guys get yours? Online?

got the aerosol version from Dan at KGS. 

Title: Re: Cleaning supplies?
Post by: buckjay on April 24, 2012, 09:34:33 AM
Break-Free is old and outdated.

M-Pro7 is great for basic cleaning. I used non chlorinated brake cleaner for the really tough jobs.

Weapon Shield is great for lubricating, but Mobil1 Synthetic Motor Oil is cheap and works great too.
Title: Re: Cleaning supplies?
Post by: Flipdog69xxx on April 24, 2012, 10:58:32 AM
M-Pro 7 solvent, M-Pro 7 oil, appropriate sized boresnake, toothbrush, and a rag.
Title: Cleaning supplies?
Post by: Jl808 on April 24, 2012, 11:26:41 AM
Just curious so I'll chime in.... I've been using Hoppes #9 to clean and CorrosionX to lubricate the slide and coat the metal afterwards.  I heard good things about CorrosionX for lubricating (teflon) and coating. I understand that CorrosionX can be used to clean too but it's supposed to be so-so only.  Is what I've been told, correct?

I've gotten to like the smell of Hoppes but I'm thinking about checking out MPro7 and Ballistol next. How is Ballistol compared to CorrosionX?
Title: Re: Cleaning supplies?
Post by: codeblue808 on April 24, 2012, 05:31:10 PM
Thanks guys, so far picked up a rifle cleaning kit since I can use it for my handgun too, a pistol brush attachment, Break Free, and some patches.
Title: Re: Cleaning supplies?
Post by: Cpt.Englehorn on April 24, 2012, 06:29:50 PM
depends on what ive been shootin and what kind of cleanin job im gonna tackle, usually keep a variety handy. Ballistol, CLP, Hoppes #9, Ballistol is my normal go to though.

Title: Re: Cleaning supplies?
Post by: Jkeone808 on April 24, 2012, 07:04:57 PM
I've been looking everywhere locally for ballistol, where do you guys get yours? Online?

Yup Kaneohe gun shop, they got aerosol and the liquid too.
Title: Re: Cleaning supplies?
Post by: TastesLikeMetal on April 24, 2012, 08:07:07 PM
The beautiful thing about Ballistol is I'm not afraid of it hurting the finish on anything I spray it on.  Some people don't like the smell but it's not that bad.
Title: Re: Cleaning supplies?
Post by: Lifer on April 24, 2012, 08:24:00 PM
Currently using "Gunzilla", its decent and very similar to M Pro 7. I used it while deployed, wasnt oily and didnt collect sand like CLP. Downside is its hard to find, so I'm switching to M Pro 7 or Ballistol

I also use Boresnakes, dental tools ( mix of plastic and metal) and a Teflon impregnated cloth for wipe downs.

Also a good old barbers brush or a smal car dash brush is something I've used for 20 + years.
Title: Cleaning supplies?
Post by: Jl808 on April 24, 2012, 08:47:27 PM
I have never used Ballistol but according to this guy, Ballistol smells like stinky feet and likes CorrosionX better.

http://www.youtube.com/watch?v=YFj8PXyQ19k
Title: Cleaning supplies?
Post by: Jl808 on April 24, 2012, 08:54:11 PM
Kind of old but this link shows some rust proof tests among different rust proofing solutions including Ballistol, CLP, CorrosionX and a bunch of other solutions.

http://www.bpcr.net/site_docs-results_schedules/documents/corrosion_tests.htm

Best Rustproofing Results:
1st. Lee Alox
2nd. Brownells Polar Active
3rd. CorrosionX

Title: Re: Cleaning supplies?
Post by: clshade on April 25, 2012, 03:44:46 AM
I use ballistol for everything, as well. Just restored an old singer treadle machine with it last week. Restored some old leather straps with it once, as well. A layer of it lives on just about every carbon steel item I own. No rust. It also slicks up the action in the guns real nice. Handy stuff to have around.

I buy the non-aerosol version online as I haven't found anyone who sells it here on the Big Island, yet. The aerosol cans can't be shipped USPS and we all know what shipping any other way costs.

I was going to use Break-Free CLP but I was put off by it being potentially carcinogenic. After some research it turns out that Ballistol is more or less the original CLP.
Title: Cleaning supplies?
Post by: swissk31 on April 25, 2012, 04:25:51 AM
Just curious has anyone used the Ed's red to clean there firearm. It's a make
It your self solvent I've been reading about. Just wondering if anyone had experience with it.
Title: Re: Cleaning supplies?
Post by: codeblue808 on April 25, 2012, 08:58:54 PM
I use ballistol for everything, as well. Just restored an old singer treadle machine with it last week. Restored some old leather straps with it once, as well. A layer of it lives on just about every carbon steel item I own. No rust. It also slicks up the action in the guns real nice. Handy stuff to have around.

I buy the non-aerosol version online as I haven't found anyone who sells it here on the Big Island, yet. The aerosol cans can't be shipped USPS and we all know what shipping any other way costs.

I was going to use Break-Free CLP but I was put off by it being potentially carcinogenic. After some research it turns out that Ballistol is more or less the original CLP.
Damn, wish I knew Break Free was potentially carcinogenic.  Thanks.
Title: Re: Cleaning supplies?
Post by: hvybarrels on April 25, 2012, 10:38:38 PM
Usually mpro7 for cleaning/lube and hoppes 9 on the 10/22 when it gets dirty from Super Colibris so I'm not wasting the 'good stuff' on it. Got some g96 that I heard great things about but haven't tried yet. Only thing is it's twice as expensive as mpro7.
Title: Re: Cleaning supplies?
Post by: hvybarrels on April 26, 2012, 12:36:46 AM
Decided to give the g96 synthetic oil a try and clean up my dirty shotty, and it has some really amazing properties. Sticks to the metal well but doesn't feel greasy at all. Guess it's back to the range to see how fast it gets dirty again.
Title: Re: Cleaning supplies?
Post by: Pit808 on April 26, 2012, 12:40:22 AM
I use Breakfree and hoppes benchrest for light cleaning / protection.  Breakfree collector for stuff that's gonna sit for a while.

Mpro copper solvent works well.

For really dirty bores I use kroil and JB paste.  These two have gotten bores shiny when nothing else would.

Haven't tried ballistol, but I will once I run out of breakfree.........which will be a long time from now.....
Title: Re: Cleaning supplies?
Post by: TeamSDSHawaii on April 26, 2012, 11:32:14 PM
Hoppes Blast and Shine... shoot the sh*t out...  then a kwik wipe and lube.... i'm shooting the next weekend,,,, :thumbsup:

Title: Re: Cleaning supplies?
Post by: TeamSDSHawaii on April 26, 2012, 11:34:56 PM
Long termers get a good douching and oiling.... then re-oiled and re-oiled.... :thumbsup:
Title: Re: Cleaning supplies?
Post by: clshade on April 27, 2012, 09:52:09 AM
I should highlight that Break Free is ~potentially~ carcinogenic. Do your own research on the discussions and you'll see that the jury is still out on if and how much. By all accounts it is a fine product and likely no more hazardous than many other cleaners, solvents and lubricants we use. Using gloves to keep it off your skin is probably all you need to do to be perfectly safe... though I also sometimes wonder about inhaled particulates when shooting. The hint of health hazards had me looking at other options and when I realized Ballistol was good for the same range of things as CLP and I could use it on other tools and leather.... sold.

Ballistol does have a strong smell at first. It is aromatic anise (like licorice). From what I understand it is actually an herbal additive - a "medicinal oil" according to the literature about it. Why they have a medicinal oil in a gun cleaning product is beyond me... but the smell fades fairly quickly. I can't say I love the smell but I don't mind it. I couldn't smell it on the leather straps I treated after about a week and the guns (and gun cabinet) don't smell like it at all.

edit - Looked it up. The medicinal oils serve 2 purposes. 1) They help stabilize the oil and prevent degradation over time and 2) it is actually approved for medicinal use in Germany but not in the US. Its a gun oil that was deigned to do double duty as a medicine. Talk about stacking functions. Not sure what that use is supposed to be, though, as it is NOT approved for medicinal use in the US and digging up that info is harder. In fairness I should mention that almost ALL herbal medicine is not approved for medicinal purposes in the US unless (you pay out the ass to have) a doctor prescribes it then (pay out the ass again to) get a specially processed and controlled version of it at the pharmacy.
Title: Re: Cleaning supplies?
Post by: hvybarrels on April 27, 2012, 10:35:09 AM
Coca Cola is perfectly legal and it's used to clean the gunk out of carburetors.

Also take into account some of that stuff you are scrubbing out of the barrel contains small particles of lead. Another reason to wear gloves.
Title: Re: Cleaning supplies?
Post by: abakja1 on May 08, 2012, 02:25:39 AM
Ive used all the above and now use Frog Lube for my weapons.
Look it up and judge for yourself on youtube.