2aHawaii
General Topics => General Discussion => Topic started by: changemyoil66 on February 06, 2019, 09:21:29 AM
-
I'm the kind of guy who likes to have back up plan A, B, C, etc..
So I found this company who caters to AWB bans and their loop holes.
https://crossarmory.com/
Basically the mag is "fixed" until you separate the upper from lower (compliant). So there is a button to push that separates, but then stops the 2 from pivoting like a seasaw. It only opens by about 1 inch, allowing you to activate the mag release and mag to drop. See videos on their site.
Here is a response I got after emailing them:
We're flattered that you follow Cross Armory even when you don't need us. It would be great if you would keep us posted as these proposals make their way through the political sausage grinder. if, worst case, they pass something, hopefully it will be closer to California's than NY or Massachusetts. If we have advance notice we can probably dome up with a solution if they do something a bit different.
We are expanding beyond AR compliance. Our Double Stack coupling base plate works on the most popular pistol mags as well as Magpul PMags. And in March we will release performance upgrade kits for Glock/P80 and 1911 builds, including triggers. If you know gun stores that cater to this audience please let them know about Cross Armory.
Here's hoping you never need us for your ARs
Thanks again,
Rich
-
I thought this would be about getting one of those PODS storage unit and shipping it to Tennessee for safekeeping or something like that. in case you decide to come out from behind enemy lines.
-
I'm the kind of guy who likes to have back up plan A, B, C, etc..
So I found this company who caters to AWB bans and their loop holes.
https://crossarmory.com/
Basically the mag is "fixed" until you separate the upper from lower (compliant). So there is a button to push that separates, but then stops the 2 from pivoting like a seasaw. It only opens by about 1 inch, allowing you to activate the mag release and mag to drop. See videos on their site.
Here is a response I got after emailing them:
We're flattered that you follow Cross Armory even when you don't need us. It would be great if you would keep us posted as these proposals make their way through the political sausage grinder. if, worst case, they pass something, hopefully it will be closer to California's than NY or Massachusetts. If we have advance notice we can probably dome up with a solution if they do something a bit different.
We are expanding beyond AR compliance. Our Double Stack coupling base plate works on the most popular pistol mags as well as Magpul PMags. And in March we will release performance upgrade kits for Glock/P80 and 1911 builds, including triggers. If you know gun stores that cater to this audience please let them know about Cross Armory.
Here's hoping you never need us for your ARs
Thanks again,
Rich
THE LAWS BAN PARTS, "A part or combination of parts designed or intended to convert a firearm into an assault weapon, "
So even if you have an AR15 without a detachable magazine it contains PARTS that could be used to make an assault weapon.
-
I tell you, plan on moving to the mainland. Cost of living is cheaper and so are homes.
-
I tell you, plan on moving to the mainland. Cost of living is cheaper and so are homes.
Been telling my wife I am heading for AZ and an inexpensive condo. She can sell the house and follow, or not.
After the move from the mainland 14 years ago, she is against it again.