2aHawaii

Tools and Uses => Firearms and Accessories => Topic started by: rswarrior1700 on May 29, 2012, 05:39:10 PM

Title: Rudius 1911 80 Percent Frame NON Serialized
Post by: rswarrior1700 on May 29, 2012, 05:39:10 PM

http://www.aresarmor.com/install/ecom-prodshow/AA-1911-F.html (http://www.aresarmor.com/install/ecom-prodshow/AA-1911-F.html)

Your thoughts folks

Title: Re: Rudius 1911 80 Percent Frame NON Serialized
Post by: GreenStomper on May 29, 2012, 05:56:19 PM

$200, could be a good deal. Don't know how you would register with no numbers, unless you choose your own.

Title: Re: Rudius 1911 80 Percent Frame NON Serialized
Post by: rswarrior1700 on May 29, 2012, 08:02:24 PM

I was wondering about the legalities of it as for hawaii goes once the 1911 is finally is built how would it be registered or stay unregistered

Title: Re: Rudius 1911 80 Percent Frame NON Serialized
Post by: GreenStomper on May 29, 2012, 10:18:51 PM

Up to 60 hours of DIY file time, or milling, or gun smith.
Cannot register,sell, or transfer.
Costs up to $1500 for parts and tools.
Found info on multiple 1911 forums.

Title: Re: Rudius 1911 80 Percent Frame NON Serialized
Post by: SpeedTek on May 30, 2012, 12:18:27 AM

When you finish it you  need to engrave a number on it. Some people engrave both name and ssn or car lic plate number on it. Go to hpd and register it. You must do all the finish work youself. They will give you the permit and tell you that you cant sell it.  You will have to destroy the frame or give it to hpd when you dont want it.   If you have a shop With a class 7 ffl finish it  They can serial number it and you can register it or sell it in the future.   If you have other q's about this let me know.

Title: Re: Rudius 1911 80 Percent Frame NON Serialized
Post by: Kingkeoni on May 30, 2012, 12:21:58 AM

Quote from: GreenStomper on May 29, 2012, 10:18:51 PM

Up to 60 hours of DIY file time, or milling, or gun smith.
Cannot register,sell, or transfer.
Costs up to $1500 for parts and tools.
Found info on multiple 1911 forums.

What a deal

Title: Re: Rudius 1911 80 Percent Frame NON Serialized
Post by: lasersgoPewPew77 on May 30, 2012, 07:17:58 AM

Quote from: SpeedTek on May 30, 2012, 12:18:27 AM

When you finish it you  need to engrave a number on it. Some people engrave both name and ssn or car lic plate number on it. Go to hpd and register it. You must do all the finish work youself. They will give you the permit and tell you that you cant sell it.  You will have to destroy the frame or give it to hpd when you dont want it.   If you have a shop With a class 7 ffl finish it  They can serial number it and you can register it or sell it in the future.   If you have other q's about this let me know.

I though there was no federal law that said you have to serialize and register a home built receiver, as long as it was for personal use? I was looking for a state law on the subject but couldn't seem to find anything about it.