2aHawaii
General Topics => Legal and Activism => Topic started by: 6716J on December 17, 2019, 10:37:18 AM
-
I am severely hoping that our constantly asleep at the wheel politicians here in Hawaii are not paying attention to this. Yes its complete infringement, yes it's completely arbitrary, and yes they are doing it. While it will lose if and when it goes to the Supreme Court because the ATF has already classified these as non-firearms, it will take years to get there and in the meanwhile, thousands of people are prevented from exercising their rights. And if it does pass muster, will they make all pipe purchases at HD have a background check? Because if it does then I would just for the sake of argument and educating the general public petition to classify all hardware stores as FFL's and go through that entire process and make all people buying pipe, conduit (barrels) and nails (firing pins) go through the background check process. Now there would be a complete uproar.
https://blog.princelaw.com/2019/12/16/pennsylvania-attorney-general-josh-shapiro-in-violation-of-the-law-classifies-80-lowers-as-firearms/
-
Where does the line stop. 79%, 65%, 22.67%? What about a 0% item
You can make your own ZERO-PERCENT firearm with parts from here.
https://www.matrixprecisionparts.com/zero-percent-jigs
When will the stoopidity end?
Sent from my SM-G970U using Tapatalk
-
I bet there will be 79.9999999999999999% lowers
Heck lets just make it equivalent to Pi for the sake of geekness. A Pi % lower. How in the world will they define a Pi lower or Pi?! :rofl:
-
The p80 80% frames are flying off the shelves on the big island. I know someone who bought 10 hearing rumors about the upcoming ban....
I guess next year they will ban hardware stores:
(https://i.imgur.com/X9OJH21.png)
-
I'm scared to buy 80% lowers / frames. Especially with that one shot poster who was selling the "best prices" on P80s a few weeks ago.
They're going to set up a sting
"Oh so you want to buy an 80% lower....?" "What are you doing here? You brought a jig. A file. Some drill bits..."
(https://getdefault.com/wp-content/uploads/2012/02/Why-dont-you-have-a-seat-over-there.jpg)
"What were you thinking?"
-
I'm scared to buy 80% lowers / frames. Especially with that one shot poster who was selling the "best prices" on P80s a few weeks ago.
They're going to set up a sting
"Oh so you want to buy an 80% lower....?" "What are you doing here? You brought a jig. A file. Some drill bits..."
(https://getdefault.com/wp-content/uploads/2012/02/Why-dont-you-have-a-seat-over-there.jpg)
"What were you thinking?"
Meh there is a guy on youtube who melted down beer cans, cast the aluminum into a piss poor lower mold he made and then finished it on a drill press he sorta kinda set up like a mill. He fired it a few times carved a serial number into it and registered it. Completely legal. If they wont let you buy an 80% lower, some industrious person will start selling molds and polymer resins to pour your own. Its about as complicated as mixing cream and sugar into a coffee and then filling a skinny ice cube tray. It is not illegal to manufacture your own firearms.
-
I'm scared to buy 80% lowers / frames. Especially with that one shot poster who was selling the "best prices" on P80s a few weeks ago.
They're going to set up a sting
"Oh so you want to buy an 80% lower....?" "What are you doing here? You brought a jig. A file. Some drill bits..."
"What were you thinking?"
They are no where near that competent. The governor cant even remember his twitter password after they announced the nuclear missile strike
-
I'm scared to buy 80% lowers / frames. Especially with that one shot poster who was selling the "best prices" on P80s a few weeks ago.
They're going to set up a sting
"Oh so you want to buy an 80% lower....?" "What are you doing here? You brought a jig. A file. Some drill bits..."
(https://getdefault.com/wp-content/uploads/2012/02/Why-dont-you-have-a-seat-over-there.jpg)
"What were you thinking?"
They will make them illegal and no one will register them at all. #anti2alogic(https://uploads.tapatalk-cdn.com/20191229/e274e446cae780175d7acde81df8a8c4.jpg)
Sent from my SM-G950U using Tapatalk
-
Where do I get my 75% lowers then?
-
Where do I get my 75% lowers then?
When 80% lowers are allowed to be classified "firearms", the 75% lowers will hit the market.
Right now, it's not federal law, and states will have to hash out their overreach in the courts. It just takes one loss to create the needed precedence.
-
When 80% lowers are allowed to be classified "firearms", the 75% lowers will hit the market.
Right now, it's not federal law, and states will have to hash out their overreach in the courts. It just takes one loss to create the needed precedence.
"Paper weights" , OG international marketplace style.
Sent from my SM-G950U using Tapatalk
-
Forget nailguns...
(https://media.giphy.com/media/YT2YBCnR83uLYx2zq0/giphy.gif)
-
Where do I get my 75% lowers then?
You wouldnt know what to do with it.
-
Where do I get my 75% lowers then?
https://www.youtube.com/watch?v=rnso4nfdM9w
Can't do 75% lower . Like how you can't do 7 minute abs. 76% is the min.
-
Just for giggles:
https://www.youtube.com/watch?v=f0G7F81LTZw
-
75% pshhhh
50% no way
25% get out!
Get your ZERO Percent firearms right here.
https://www.matrixprecisionparts.com/zero-percent-jigs
This kit is all you need to build the Ruger Zero Percent receiver, except a hack saw, vise, drill motor, and some files. You can use any metal tube 1” outside diameter and 3/4” inside diameter, or we have some tubing available for sale on our website.
(https://images.squarespace-cdn.com/content/v1/5913e6dc9f7456878ba626ee/1542525956976-L457XPBEKUZJQEQL5J6L/ke17ZwdGBToddI8pDm48kAw7tgkxSP2ra5lxCY--kRB7gQa3H78H3Y0txjaiv_0fDoOvxcdMmMKkDsyUqMSsMWxHk725yiiHCCLfrh8O1z5QHyNOqBUUEtDDsRWrJLTmNFveLtSPA03JKuAUT-dZq1FMqI1Z1z6gIJ6T-c3lBg4hiOoEeBai7-yP99SkO-pf/Ruger-Jig-Parts-Sheet.jpg?format=2500w)
-
They'll never stop the ingenuity of the people
https://homemadeguns.wordpress.com/
-
I have been reading the text of the proposed law and coming out with a 70% lower or a 60% lower wouldn't prevent enforcement. It basically is worded to describe some part that is meant to be turned into a firearm. So a 0% lower (a block of aluminum) would certainly fall outside the definition, if you had something like a 50% lower they could still certainly come after you.
As I see it the loophole would be to have the 80% lower be intended to produce something other than a firearm. Say an air soft gun or a crossbow.
-
I'm scared to buy 80% lowers / frames. Especially with that one shot poster who was selling the "best prices" on P80s a few weeks ago.
They're going to set up a sting
"Oh so you want to buy an 80% lower....?" "What are you doing here? You brought a jig. A file. Some drill bits..."
(https://getdefault.com/wp-content/uploads/2012/02/Why-dont-you-have-a-seat-over-there.jpg)
"What were you thinking?"
How can they set up a sting on something that is currently legal? It's not a firearm.
-
How can they set up a sting on something that is currently legal? It's not a firearm.
I was being cynical.
I had the skit from Chris Rock in mind. In it he told a story where he was pulled over for stealing his own car.
-
I have been reading the text of the proposed law and coming out with a 70% lower or a 60% lower wouldn't prevent enforcement. It basically is worded to describe some part that is meant to be turned into a firearm. So a 0% lower (a block of aluminum) would certainly fall outside the definition, if you had something like a 50% lower they could still certainly come after you.
As I see it the loophole would be to have the 80% lower be intended to produce something other than a firearm. Say an air soft gun or a crossbow.
What about parts like barrel, springs, slides, all can be turned into a firearm.
Sent from my SM-G950U using Tapatalk
-
What about parts like barrel, springs, slides, all can be turned into a firearm.
Sent from my SM-G950U using Tapatalk
exactly
this bill could ban lpks, triggers, grips, rails etc
-
Somedays living in Hawaii is like listening to commercials.
"Offer not valid in Hawaii " except change offer for freedom
-
What about parts like barrel, springs, slides, all can be turned into a firearm.
Sent from my SM-G950U using Tapatalk
The wording in the bill is a little hard to understand clearly and I would have to look at it real closely. I am not sure whether it would include all the parts of just the frame which constitutes the actual firearm. My impression was the part that would become the frame or the firearm.
-
They're going to have open the can of worms and start making definitions for things like readily. Readily for me is different than you. And the ATF has said that parts are not firearms thus not subject.
Sadly they'll pass it and we'll have to sue and get injunctions.
Sent from my SM-G970U using Tapatalk
-
started with a 0%
https://www.youtube.com/watch?v=30Qf-IIt2c0
-
The pour in the mold kit. Starts from a 2 part resin
http://ar15mold.com/freedom-15-5-kit/
Sent from my SM-G970U using Tapatalk
-
Good news in PA
https://blog.princelaw.com/2020/01/31/injunction-granted-against-pennsylvania-state-polices-policy-relating-to-partially-manufactured-frames-and-receivers/?fbclid=IwAR2mbIAylwt6vnuQPGVeMQM18SINi-QtMsLXa_yBB-C76wP_svCOR2Fs5aU