2aHawaii
Tools and Uses => Reloading => Topic started by: ren on January 17, 2020, 06:59:23 AM
-
Since moly coating usage faded years ago, here's a new "fad"
HBN coating
https://www.bulletcoatings.com/product/reloading-bullet-tumbling-boron-nitride-hbn-powder-kit/ (https://www.bulletcoatings.com/product/reloading-bullet-tumbling-boron-nitride-hbn-powder-kit/)
-
Since moly coating usage faded years ago, here's a new "fad"
HBN coating
https://www.bulletcoatings.com/product/reloading-bullet-tumbling-boron-nitride-hbn-powder-kit/ (https://www.bulletcoatings.com/product/reloading-bullet-tumbling-boron-nitride-hbn-powder-kit/)
Something new to try after I move and get set back up. I like things that are easy to do and this looks to be right up my alley. Thanks Ren!
-
I watched the tutorial.
He makes some illogical statements towards the end of the video.
eg. less drag and lower velocity?
-
I watched the tutorial.
He makes some illogical statements towards the end of the video.
eg. less drag and lower velocity?
He said less drag means lower pressures which means lower velocity. He even went as far as saying you will have to up your powder charge to get the velocity back up.
Could it be that the resistance (higher friction) to movement by the bullet creates higher back pressures and thus higher velocity? If so the less resistance (lower friction) would cause lower pressure which would lead to lower velocities.
Here is a discussion I found:
https://forum.snipershide.com/threads/what-happens-to-velocity-with-hbn-coated-bullets.64724/
-
I read about HBN being hygroscopic? So like moly it attracts moisture?
-
Not that new. I've used it when I shot 6mmBR years ago. It does reduce pressures, reduces friction, and are able to increase velocity. Barrel fowling is virtually eliminated, and consistent shot velocity and grouping over many rounds is maintained throughout extended course of fire.
I believe the HBN is not hydroscopic and why I chose it over moly
Kind of a lot of work. I stopped using it when I switched over to .308 and got a Bartlien barrel. Found the quality barrel makes it not as useful.
-
He said less drag means lower pressures which means lower velocity. He even went as far as saying you will have to up your powder charge to get the velocity back up.
Could it be that the resistance (higher friction) to movement by the bullet creates higher back pressures and thus higher velocity? If so the less resistance (lower friction) would cause lower pressure which would lead to lower velocities.
Here is a discussion I found:
https://forum.snipershide.com/threads/what-happens-to-velocity-with-hbn-coated-bullets.64724/
You'll get lower velocity with less drag of the projectile going down the barrel. Less drag equals less pressure, which means you can go up in your charge safely, thereby increasing the velocity over what you could do safely with uncoated bullets.
-
The 6BR was a lazer at 600 with those HBN 107 grain bullets...
What wind? ;)