2aHawaii
Tools and Uses => Firearms and Accessories => Deals and Sales => Topic started by: Inspector on November 14, 2020, 05:20:19 AM
-
XTreme Bullets sent me an email letting me know that they have 115gr and 124gr 9mm FMJ bullets for sale. These are not their plated bullets. I have not tried these but their plated bullets give good results. I ordered some just because. After checking their sight, only the 124gr are left.
https://www.xtremebullets.com/9mm-124-RN-FMJ-p/xj9mm-124rnfmj-b0500.htm
-
XTreme Bullets sent me an email letting me know that they have 115gr and 124gr 9mm FMJ bullets for sale. These are not their plated bullets. I have not tried these but their plated bullets give good results. I ordered some just because. After checking their sight, only the 124gr are left.
https://www.xtremebullets.com/9mm-124-RN-FMJ-p/xj9mm-124rnfmj-b0500.htm
xtreme no longer ships free to hawaii
:(
-
xtreme no longer ships free to hawaii
:(
Didn’t know. Sorry. 😥
-
I looked into Xtreme but after figuring out what it would cost to load 1000 rounds I decided against buying their plated or jacketed bullets. If I get desperate for 9mm ammo I'll probably load some PC bullets but as it is I prefer to shoot my 38s/357s so that's where my stash is headed.
I've got my .45 load figured out, now I'm just building up a reserve of bullets--powder, primer and cases I have.
-
BTW Xtreme does have limited plated 9mms in stock. I'm surprised its still available 9 hours after Inspector posted the above info.
-
I looked into Xtreme but after figuring out what it would cost to load 1000 rounds I decided against buying their plated or jacketed bullets. If I get desperate for 9mm ammo I'll probably load some PC bullets but as it is I prefer to shoot my 38s/357s so that's where my stash is headed.
I've got my .45 load figured out, now I'm just building up a reserve of bullets--powder, primer and cases I have.
I started loading PC 38/357 boolits and I have had very good results. I just started casting and PC my own and I am about to start loading them myself. So I’ll see how they perform. I have tried loading PC 9mm boolits with limited success. I have not tried casting and PC my own yet. If I don’t see better results with 9mm PC boolits I am going to stick with jacketed. I have tried Speer plated boolits with limited success as well. I have some Berry’s and Xtreme plated boolits to try and I hope to see better results.
I have my 45ACP/AR loads figured out using 250gr PC boolits. I have not cast for this boolit yet. I am still testing my 45LC using the same boolit. And I have not tested my 45 Casull loads yet. I’m using a jacketed bullet right now but I have a mold ad have not tried casting for it yet.
In the meantime I am low on 9mm so I have to start processing more brass and start loading those Berry’s plated boolits.
-
BTW Xtreme does have limited plated 9mms in stock. I'm surprised its still available 9 hours after Inspector posted the above info.
I am too considering the email I got was about 8-9 hours before I posted this morning.
-
I am too considering the email I got was about 8-9 hours before I posted this morning.
No shipping options to HI. Send me some 😝
-
No shipping options to HI. Send me some 😝
Uh, I posted this just to tempt everybody. :rofl: