2aHawaii

General Topics => General Discussion => Topic started by: bchsiaohawaii on January 12, 2021, 02:01:04 PM

Title: 9mm Mag blocking service
Post by: bchsiaohawaii on January 12, 2021, 02:01:04 PM
Anyone offers mag blocking service? Asking for a friend that has a bunch of spare parts lying around...  :shaka:
Title: Re: 9mm Mag blocking service
Post by: 6716J on January 12, 2021, 02:35:02 PM
You can do it yourself.

1. Go to https://www.magazineblocks.com/magento/products/magblock-kits/pistols.html and purchase what you need for numbers and for the 'zines in question

2. "Have gunsmith disassemble" magazines  ;)

3. Get epoxy to glue your block to the baseplate

4. Glue and let set

5. "Have gunsmith reassemble" magazines  ;)

You can either opt to drill and pop-rivet the basepad to the baseplate or leave it. Nothing in HRS that says you have to.

Or call Bushido Arms & Ammunition to have him do it.

Video on how to do it: https://www.youtube.com/watch?v=qq5wPP7ebF0

Title: Re: 9mm Mag blocking service
Post by: aieahound on January 12, 2021, 03:12:24 PM
There’s also blocks you can epoxy to the follower.
That’s how mine was when I got them from the gun shop.
Title: Re: 9mm Mag blocking service
Post by: Flapp_Jackson on January 12, 2021, 03:23:45 PM
You can do it yourself.

1. Go to https://www.magazineblocks.com/magento/products/magblock-kits/pistols.html and purchase what you need for numbers and for the 'zines in question

2. "Have gunsmith disassemble" magazines  ;)

3. Get epoxy to glue your block to the baseplate

4. Glue and let set

5. "Have gunsmith reassemble" magazines  ;)

...

Once blocked, do you really have to have a gunsmith/FFL reassemble? 

Logically, they are now limited to 10 rds, so reassembling should be no problem.

Am I overlooking something?
Title: Re: 9mm Mag blocking service
Post by: 6716J on January 12, 2021, 04:35:08 PM
You can do it yourself.

1. Go to https://www.magazineblocks.com/magento/products/magblock-kits/pistols.html and purchase what you need for numbers and for the 'zines in question

2. "Have gunsmith disassemble" magazines  ;)

3. Get epoxy to glue your block to the baseplate

4. Glue and let set

5. "Have gunsmith reassemble" magazines  ;)

You can either opt to drill and pop-rivet the basepad to the baseplate or leave it. Nothing in HRS that says you have to.

...



Once blocked, do you really have to have a gunsmith/FFL reassemble? 

Logically, they are now limited to 10 rds, so reassembling should be no problem.

Am I overlooking something?

Note the "wink"

"I am not a professional and would only have a professional gunsmith perform any service to my firearms or associated parts, i.e: magazines"

you could void the warranty......  :crazy:

wink wink.... nudge nudge
Title: Re: 9mm Mag blocking service
Post by: bchsiaohawaii on January 12, 2021, 08:32:57 PM

Mahalo for this!
 :worship:

You can do it yourself.

1. Go to https://www.magazineblocks.com/magento/products/magblock-kits/pistols.html and purchase what you need for numbers and for the 'zines in question

2. "Have gunsmith disassemble" magazines  ;)

3. Get epoxy to glue your block to the baseplate

4. Glue and let set

5. "Have gunsmith reassemble" magazines  ;)

You can either opt to drill and pop-rivet the basepad to the baseplate or leave it. Nothing in HRS that says you have to.

Or call Bushido Arms & Ammunition to have him do it.

Video on how to do it: https://www.youtube.com/watch?v=qq5wPP7ebF0