2aHawaii
General Topics => General Discussion => Topic started by: tim808 on March 25, 2021, 07:46:38 AM
-
I’ve tried google and haven’t found anything
Before I install hasps for padlocks, has anyone here converted their old skb cases with tsa lock to non tsa locks?
Even if it can convert to non tsa locks, I may still install a few hasps and padlocks for added peace of mind.
The locking system looks like it could be pried open easily but I guess if they are determined they probably have bolt cutters too. But it might help deter the less determined.
Case would only be used for outer islands if that matters
-
Locked after inspection and unable to remove case from luggage ! :thumbsup:
(https://i.imgur.com/EwPso65m.jpg)
(https://i.imgur.com/lGrKuKrm.jpg)
(https://i.imgur.com/TmdPpicm.jpg)
(https://i.imgur.com/Nrw6dh8m.jpg)
-
What model case do you have?
This shows the reverse process -- changing standard latches to TSA locking latches. Should be the same process if you have standard latches to install.
https://youtu.be/3TOcarNMWb8
-
Rocky
Thanks for that great idea!
Flapp
I was hoping skb sold non tsa “cylinders” / “cores” or whole non tsa latch kits. I can’t find any...so it looks like I just have to pick up 4 hasp sets
-
You can try just taking out the locks on the latch and go down to a locksmith and see if they have any cores that you can put in the latch. You'll just have to match the diameter of the core, the length and if it has the threaded stud on the end. Or take the measurements and just order some from Amazon
-
Thank you 6716J!
-
If you need, I just swapped out the plain latches for TSA latches on my case and you can have the old ones if they'll fit. 3i-2011-7 case, large latch
If I'm travelling with a firearm, I'd rather the outside locks. The latch locks are just a deterrent. A small pry bar will pop them with not much resistance.
-
Thanks 6716J!
I noticed the latches aren’t the greatest and was going to put on at minimum two hasps for padlocks. Guess I’ll just leave the latches as is and install 4-6 hasps and padlocks
Thanks again!
-
I am dense about the whole TSA access thing. For long rifle case, no TSA access.
No difference if you have a handgun in the same case as the rifle?
Handgun case not the same, or why would there ever have been access locks for them?
Will be bringing some toys with me to the mainland in the near future, so am exceedingly curious about doing all this.
Wife took over some ammo and they just asked if it was in the factory boxes.
Will be bringing some in MTM ammo cases, so I guess they will want to see them if not factory boxes?
-
I am dense about the whole TSA access thing. For long rifle case, no TSA access.
No difference if you have a handgun in the same case as the rifle?
Handgun case not the same, or why would there ever have been access locks for them?
Will be bringing some toys with me to the mainland in the near future, so am exceedingly curious about doing all this.
Wife took over some ammo and they just asked if it was in the factory boxes.
Will be bringing some in MTM ammo cases, so I guess they will want to see them if not factory boxes?
You should do a bit of research on the airports you plan to fly through. I've seen where Atlanta is really bad about cutting locks to inspect firearms cases. They don't bother to try and page the owner first. They just cut, open, close, then notify the airline. Then you have to run to the closest gift shop to buy replacement locks.
Theoretically the TSA should attempt to get the owner to open the case before cutting locks, but in ATL, they just don't.
In that instance, having TSA-accessible locks might be the better approach.
If you're flying with 1 or zero layovers, you're probably okay with non-TSA locks. Destination airports won't have a need to inspect the case, and you're obviously available when you check in with the firearm and declare it -- so if TSA needs access, they know where you are.
Here's a video from a guy who was really pissed his locks were cut at MCO (Orlando).
https://youtu.be/Njlx2jazhnA
-
You should do a bit of research on the airports you plan to fly through.
Luckily for me, American now has a nonstop to Phoenix. Did not find any mention of TSA issues cutting locks at PHX.
So, the "TSA" locks were just a hedge against the goons deciding to inspect your locked checked bags, never a requirement?
-
Would it be advisable to carry spare locks thru certain airports? Or just to have them on you for these kind of situation?
Sent from my SM-A102U using Tapatalk
-
Would it be advisable to carry spare locks thru certain airports? Or just to have them on you for these kind of situation?
Sent from my SM-A102U using Tapatalk
I carry spare locks anyway so I can secure my gun case to the car frame inside the trunk. If I'm going in someplace I can't carry (courthouse, etc), I lock the gun in the case, then lock the case to a heavy bike cable slid through the cutout holes in the trunk.